Other / Parts / Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters.

BREAST PUMP COLLECTION UNIT. DESIGNED SOLELY…

BREAST PUMP COLLECTION UNIT. DESIGNED SOLELY FOR USE WITH ELECTRICAL BREAST PUMP. THE DEVICE COMPRISES OF A PLASTIC BOTTLE, WITH CONNECTING BREAST CUP ATTACHMENT AND TUBE. PRODUCT IS ATTACHED TO THE BREAST PUMP FOR THE PURPOSE OF COLLECTING BREAST MILK. MADE FROM INJECTION MOULDED POLYPROPYLENE.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING: GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 - AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 5(B) HAS BEEN USED TO IDENTIFY THE TYPE OF PACKAGING GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL - 841490 PARTS.

TARIC CODE - 8414900090 - OTHER THAN ELSEWHERE SPECIFIED IN THIS HEADING. ALSO CLASSIFIED IN ACCORDANCE WITH:- SECTION XVI NOTE 2 EUROPEAN COMMISSION IMPLEMENTING REGULATION 43/2013

BTI Reference:
GB503582367.
Start date of validity:
.
End date of validity:
2020-07-26.

National keywords: OF PLASTIC MILK PUT UP FOR RETAIL SALE FOR BABIES POLYPROPYLENE ADAPTERS PUMPS

HERMETIC ROTOR MADE FROM STEEL AND COPPER…

HERMETIC ROTOR MADE FROM STEEL AND COPPER WIRE SPECIFICALLY DESIGNED TO MEET THE REQUIREMENTS OF ONE PARTICULAR CUSTOMER, AND THEIR COMPRESSOR MANUFACTURE.

THESE COMPRESSORS ARE USED FOR REFRIGERATION. THE IMPORTED ROTOR UNIT IS AN INTEGRAL PART OF THE COMPRESSOR. (ALTHOUGH AT FIRST INTERPRETATION THE HERMETIC ROTOR MAY LOOK LIKE PARTS OF AN ELECTRIC MOTOR, IT CANNOT BE USED TO CONSTRUCT AN ELECTRIC MOTOR.) THE ONLY USE FOR THE PRODUCT IS TO BE BUILT, ALONG WITH OTHER COMPONENTS, INTO A COMPRESSOR.

BASED ON THE TECHNICAL INFORMATION REGARDING THE ROTOR, IN PARTICULAR ITS FUNCTION AND ASSEMBLY WITHIN THE COMPRESSOR, WE NOTE THAT THE FOLLOWING POINTS AS RELEVANT IN CONSIDERING THE ITEM TO BE AN INTEGRAL PART USED SOLELY AND PRINCIPALLY WITH THE COMPRESSOR: THE ROTOR IS BUILT ACCORDING TO SPECIFICATION FOR CUSTOMER'S COMPRESSORS.

IT IS NOT POSSIBLE TO MANUFACTURE THIS TYPE OF COMPRESSOR WITHOUT A ROTOR. THE ROTOR IS ONLY USED AND ONLY SUITABLE FOR OPERATION IN THE CUSTOMER COMPRESSOR.

IT IS UNSUITABLE FOR IN ANY OTHER MACHINE. THE ROTOR IS DIRECTLY FITTED ONTO THE COMPRESSOR AND NOT ASSEMBLED INTO A MOTOR PRIOR TO INTEGRATION WITH THE COMPRESSOR: THE ROTOR IS INSTALLED DIRECTLY ONTO THE CRANKSHAFT OF THE COMPRESSOR AND THE COMPRESSOR CANNOT BE OPERATED EXCEPT AS AN INTEGRAL PART OF THE COMPRESSOR THE ROTOR CANNOT BE REMOVED FROM THE COMPRESSOR WITHOUT TOTALLY DISMANTLING AND DESTROYING THE COMPRESSOR.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING ALSO CLASSIFIED IN ACCORDANCE WITH NOTE 2 (B) TO SECTION XVI HARMONISED SYSTEM EXPLANATORY NOTES (HSEN) TO HEADING 8414

BTI Reference:
GB503216986.
Start date of validity:
.
End date of validity:
2019-08-23.

National keywords: OF STEEL ROTORS COMPRESSORS MECHANICAL/ELECTRICAL APPARATUS REFRIGERATING EQUIPMENT PARTS

HERMETIC STATORS MADE FROM STEEL AND COPPER…

HERMETIC STATORS MADE FROM STEEL AND COPPER WIRE THESE ARE SPECIFICALLY DESIGNED TO MEET THE REQUIREMENTS OF ONE PARTICULAR CUSTOMER, AND THEIR COMPRESSOR MANUFACTURE.

THESE COMPRESSORS ARE USED FOR REFRIGERATION. THE IMPORTED STATORS UNITS ARE AN INTEGRAL PART OF THE COMPRESSOR. (ALTHOUGH AT FIRST INTERPRETATION THE HERMETIC STATOR MAY LOOK LIKE PARTS OF AN ELECTRIC MOTOR, THEY 100% CANNOT BE USED TO CONSTRUCT AN ELECTRIC MOTOR.

THE ONLY USE FOR THESE PRODUCTS IS TO BE BUILT ALONG WITH OTHER COMPONENTS INTO A COMPRESSOR.

BASED ON THE TECHNICAL INFORMATION REGARDING THE STATORS, IN PARTICULAR THEIR FUNCTION AND ASSEMBLY WITHIN THE COMPRESSORS, WE NOTE THAT THE FOLLOWING POINTS AS RELEVANT IN CONSIDERING THESE ITEMS TO BE INTEGRAL PARTS USED SOLELY AND PRINCIPALLY WITH THE COMPRESSOR: THE STATOR IS BUILT ACCORDING TO SPECIFICATION FOR CUSTOMER'S COMPRESSORS.

IT IS NOT POSSIBLE TO MANUFACTURE THIS TYPE OF COMPRESSORS WITHOUT A STATOR AND ROTOR. THESE STATORS ARE ONLY USED AND ONLY SUITABLE FOR OPERATION IN THE CUSTOMER COMPRESSORS.

THESE ARE NOT SUITABLE TO BE APPLIED IN ANY OTHER MACHINE. THE STATORS ARE DIRECTLY FITTED ONTO THE COMPRESSOR AND NOT ASSEMBLED INTO A MOTOR PRIOR TO INTEGRATION WITH THE COMPRESSOR: THE STATORS ARE INSTALLED DIRECTLY INTO THE COMPRESSOR HOUSING AND ARE AN INTEGRAL PART OF THE COMPRESSOR THE STATORS CANNOT BE REMOVED FROM THE COMPRESSOR WITHOUT TOTALLY DISMANTLING AND DESTROYING THE COMPRESSOR.

THESE PARTS ARE CUSTOM BUILT FOR THE CUSTOMER'S COMPRESSOR AND NOT INTERCHANGEABLE WITH STATORS USED TO BUILD STAND-ALONE ELECTRIC MOTORS.

IT WOULD NOT BE ECONOMICALLY OR TECHNICALLY VIABLE TO STRIP OUT THE STATOR FROM THE COMPRESSOR AND RE-USE THESE TO BUILD A MOTOR.) OVERALL LENGTH APPROX 14.5 INCHES (376 MM).

BTI Reference:
GB503210319.
Start date of validity:
.
End date of validity:
2019-08-17.

National keywords: MECHANICAL/ELECTRICAL APPARATUS STATORS ELECTROMAGNETIC REFRIGERATING EQUIPMENT PARTS

A KIT CONSISTING OF SPARE PARTS FOR A COMPRESSOR…

A KIT CONSISTING OF SPARE PARTS FOR A COMPRESSOR PUMP WHICH HAS A GUAGE PRESSURE CAPACITY OF 0.35BAR AND A FLOW PER HOUR OF 9 CUBIC METRES.

THE KIT CONSISTS OF A PRINTED CIRCUIT BOARD WITH VARIOUS ELECTRICAL COMPONENTS WHICH HAS A PRESSURE CONTROL SWITCH ON IT.

THERE IS ALSO A MECHANICAL AIR VALVE WITH A HINGED FLAP AND A SMALL ELECTRIC MOTOR TO DRIVE THE FLAP.

THE PARTS ARE WRAPPED INDIVIDUALLY AND THEN PACKAGED TOGETHER IN A CARDBOARD BOX.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

ALSO CLASSIFIED IN ACCORDANCE WITH SECTION XVI NOTE 2(b) HSENS

BTI Reference:
GB502419581.
Start date of validity:
.
End date of validity:
2021-04-28.

National keywords: ASSEMBLIES COMPRESSORS PRINTED CIRCUIT BOARDS

A COMPRESSOR COVER CASTING. THIS IS THE RAW…

A COMPRESSOR COVER CASTING. THIS IS THE RAW MATERIAL FROM WHICH THE FINISHED COMPRESSOR COVER IS MACHINED AND IS PART OF A TURBOCHARGER ASSEMBLY THAT HAS BEEN DESIGNED TO USE WITH AN INTERNAL COMBUSTION ENGINE, THAT RUNS ON DIESEL, PETROL OR GAS FUEL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

ALSO CLASSIFIED IN ACCORDANCE WITH SECTION XVI NOTE 2(b) HSENS CNEN

BTI Reference:
GB124138793.
Start date of validity:
.
End date of validity:
2020-11-27.

National keywords: COVERS ASSEMBLIES COMPRESSORS

AN OUTLET ADAPTOR CASTING MACHINED FROM CAST…

AN OUTLET ADAPTOR CASTING MACHINED FROM CAST IRON. IT IS SPECIFICALLY USED TO FACILITATE CUSTOMER CONNECTION TO THE TURBO OUTLET. IT IS AN INTEGRAL PART OF A TURBOCHARGER ASSEMBLEY THAT HAS BEEN DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINE RUNNING ON DIESEL, PETROL OR GAS FUEL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING ALSO CLASSIFIED IN ACCORDANCE WITH SECTION XVI NOTE 2(b) HSENS CNEN

BTI Reference:
GB123595862.
Start date of validity:
.
End date of validity:
2020-11-19.

National keywords: OF CAST IRON CONNECTIONS

TITANIUM COMPRESSOR WHEEL, PART OF A TURBOCHARGER

TITANIUM COMPRESSOR WHEEL, PART OF A TURBOCHARGER

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING

BTI Reference:
GB124127213.
Start date of validity:
.
End date of validity:
2020-11-16.

National keywords: TURBINES

CONNECTING PIPE WHICH IS FITTED AT THE JOINT…

CONNECTING PIPE WHICH IS FITTED AT THE JOINT BETWEEN HIGH PRESSURE AND LOW PRESSURE COVERS IN A TWO STAGE TURBO CHARGER TO CREATE A GAS TIGHT SEAL.

BTI Reference:
GB124127115.
Start date of validity:
.
End date of validity:
2020-11-16.

National keywords: OF ALUMINIUM

COMPRESSOR WHEEL MADE OF ALUMINIUM

COMPRESSOR WHEEL MADE OF ALUMINIUM

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING

BTI Reference:
GB123588563.
Start date of validity:
.
End date of validity:
2020-11-09.

National keywords: OF ALUMINIUM ASSEMBLIES COMPRESSORS WHEELS

AN OUTLET ADAPTOR MACHINED FROM CAST IRON…

AN OUTLET ADAPTOR MACHINED FROM CAST IRON CASTING AND SPECIFICALLY USED TO FACILITATE CUSTOMER CONNECTION TO THE TURBO OUTLET. IT IS AN INTEGRAL PART OF A TURBOCHARGER ASSEMBLEY THAT HAS BEEN DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINE RUNNING ON DIESEL,

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8414 FOR AIR OR VACUUM PUMPS, AIR OR OTHER GAS COMPRESSORS AND FANS; VENTILATING OR RECYCLING HOODS INCORPORATING A FAN, WHETHER OR NOT FITTED WITH FILTERS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8414 90 FOR PARTS TARIC 84149000 90 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING ALSO CLASSIFIED IN ACCORDANCE WITH SECTION XVI NOTE 2(b) HSENS CNEN

BTI Reference:
GB123595764.
Start date of validity:
.
End date of validity:
2020-11-05.

National keywords: OF CAST IRON CONNECTIONS