Direct current to direct current converter.

AN UNREGULATED DC-DC CONVERTER, PRODUCED…

AN UNREGULATED DC-DC CONVERTER, PRODUCED IN AN ULTRA-MINIATURE ENCAPSULATED PACKAGE THE CONVERTER HAS AN INPUT VOLTAGE OF 5 V DC AND OUTPUT OF 48 V DC.

FEATURES INLCUDE: UP TO 1.25 WATT OUTPUT AT 70 DEGREES C AMBIENT, ENCAPSULATED SEMICONDUCTORS, SINGLE OUTPUT AND INPUT/OUTPUT ISOLATION.

NO HEAT SINK IS REQUIRED. THE PINS OF THE CONVERTER ARE SOLDERED TO A PCB BOARD.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8504 - ELECTRICAL TRANSFORMERS, STATIC CONVERTERS (FOR EXAMPLE, RECTIFIERS) AND INDUCTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8504 40 - STATIC CONVERTERS CN CODE 850440 90 - OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

TARIC 85044090 25 - DIRECT CURRENT TO DIRECT CURRENT CONVERTER - WITHOUT HOUSING OR - WITH HOUSING WITH CONNECTION PINS, CONNECTION STUDS, SCREW CONNECTORS, UNPROTECTED LINE CONNECTIONS, CONNECTION ELEMENTS WHICH ALLOW THE MOUNTING TO A PRINTED CIRCUIT BOARD BY SOLDERING OR ANY OTHER TECHNOLOGY, OR OTHER WIRING CONNECTIONS REQUIRING FURTHER PROCESSING ALSO CLASSIFIED IN ACCORDANCE WITH:- HARMONIZED SYSTEM EXPLANATORY NOTE (HSEN) (II) (D) TO HEADING 8504

BTI Reference:
GBBTI503663563.
Start date of validity:
.
End date of validity:
2020-10-31.

National keywords: FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING MINIATURE

A HIGH VOLTAGE, ISOLATED DC-DC CONVERTER…

A HIGH VOLTAGE, ISOLATED DC-DC CONVERTER IN AN ULTRA-MINIATURE ENCAPSULATED PACKAGE. FEATURES INCLUDE: 1.25 WATT OUTPUT AT 70 DEGREE AMBIENT (NO HEAT SINK REQUIRED). INPUT 5V DC. OUTPUT 250 V DC. INTENDED FOR SURFACE BOARD MOUNTING. THE PINS ARE SOLDERED INTO THE BOARD.

BTI Reference:
GBBTI503643767.
Start date of validity:
.
End date of validity:
2020-10-31.

National keywords: FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING MINIATURE

AN ULTRA-MINIATURE, HIGH RELIABILITY DIRECT…

AN ULTRA-MINIATURE, HIGH RELIABILITY DIRECT CURRENT TO HIGH VOLTAGE DIRECT CURRENT CONVERTER, IDEAL FOR APPLICATIONS REQUIRING MINIMAL SIZE AND WEIGHT.

THE INPUT VOLTAGE IS 5 VOLTS DC AND THE OUTPUT VOLTAGE 6,000 V DC. THE TYPICAL FREQUENCY IS 75-500 KHZ.

THE OUTPUT IS DIRECTLY PROPORTIONAL TO THE INPUT VOLTAGE AND IS LINEAR FROM <0.7 V INPUT TO MAXIMUM INPUT VOLTAGE, ALLOWING FOR ADJUSTABLE OUTPUT VOLTAGE.

THE CONVERTER HAS INPUT AND OUTPUT LEADS WHICH ARE CUT SHORT AND SOLDERED INTO A PRINTED CIRCUIT BOARD.

BTI Reference:
GBBTI503642770.
Start date of validity:
.
End date of validity:
2020-10-31.

National keywords: FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING

A MINIATURE, WELL REGULATED, HIGH VOLTAGE…

A MINIATURE, WELL REGULATED, HIGH VOLTAGE DC TO DC CONVERTER IN A SHIELDED PC MOUNT PACKAGE.

THE CONVERTER FEATURES PRECISION 0 TO 100% PROGRAMMABLE OUTPUT AND VERY LOW RIPPLE AND EMI/RFI.

IT IS IDEAL FOR INTEGRATION INTO COMPACT, SENSITIVE EQUIPMENT. THE DC CONVERTER HAS AN OUTPUT VOLTAGE OF 0 TO 1.25 kV, WITH A MIAXIMUM OUTPUT CURRENT OF 0 TO 1 mA.

THE INPUT VOLTAGE IS +11.5 TO +16 V. THE CONVERTER USTILISES A QUASI SINEWAVE OSCILLATOR, SHIELDED TRANSFORMER AND AN ISOLATED STEEL ENCLOSURE FEATURING A SEPARATE GROUNDING PIN.

IT IS SOLDERED TO A PRINTED CIRCUIT BOARD.

BTI Reference:
GBBTI503643081.
Start date of validity:
.
End date of validity:
2020-10-31.

National keywords: FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING

A HIGH VOLTAGE DC/DC CONVERTER OFFERING A…

A HIGH VOLTAGE DC/DC CONVERTER OFFERING A HIGHLY REGULATED, HIGH VOLTAGE ISOLATED OUTPUT IN A SIX SIDED NICKEL PLATED METAL CASE.

THE INPUT RANGE IS 36-72VDC AND THE OUTPUT 200VDC, 75 Ma. OTHER FEATURES INCLUDE: LOW ESR CAPACITOR INPUT FILTER, CONTINUOUS SHORT CIRCUIT PROTECTION, 130KHz SWITCHING FRQUENCY, 1000 VDC OUTPUT ISOLATION.

THE CONVERTER HAS PINS FOR SOLDERING TO A PRINTED CIRCUIT BOARD. DIMENSIONS: 1 X 2 X 0.41 INCHES.

WEIGHT: 1.2 Oz.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8504 - ELECTRICAL TRANSFORMERS, STATIC CONVERTERS (FOR EXAMPLE, RECTIFIERS) AND INDUCTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8504 40 - STATIC CONVERTERS CN CODE 850440 90 - OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

TARIC 85044090 25 - DIRECT CURRENT TO DIRECT CURRENT CONVERTER - WITHOUT HOUSING OR - WITH HOUSING WITH CONNECTION PINS, CONNECTION STUDS, SCREW CONNECTORS, UNPROTECTED LINE CONNECTIONS, CONNECTION ELEMENTS WHICH ALLOW THE MOUNTING TO A PRINTED CIRCUIT BOARD BY SOLDERING OR ANY OTHER TECHNOLOGY, OR OTHER WIRING CONNECTIONS REQUIRING FURTHER PROCESSING ALSO CLASSIFIED IN ACCORDANCE WITH:- hARMONIZED SYSTEM EXPLANATORY NOTE (HSEN) (II) (D) TO HEADING 8504

BTI Reference:
GBBTI503641283.
Start date of validity:
.
End date of validity:
2020-10-31.

AN UNREGULATED HIGH VOLTAGE DC-DC CONVERTER,…

AN UNREGULATED HIGH VOLTAGE DC-DC CONVERTER, IN AN ULTRA-MINIATURE, LOW PROFILE ENCAPSULATED PACKAGE.

THE SINGLE OUTPUT ISOLATED UNIT WILL OPERATE OVER THE TEMPERATURE RANGE OF -25 DEGREE C TO +70 DEGREE C WITH NO HEAT SINK OR ELECTRICAL DERATING.

TH INPUT VOLTAGE IS 5 V AND THE OUTPUT 1000 V. THE MAXIMUM OUTPUT POWER IS 1.25 WATT AT 70 DEGREE AMBIENT.

THE DC- DC CONVERTER IS DESIGNED FOR MOUNTING ON A PRINTED CIRCUIT BOARD BY SOLDERING THE PINS TO THE BOARD.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8504 - ELECTRICAL TRANSFORMERS, STATIC CONVERTERS (FOR EXAMPLE, RECTIFIERS) AND INDUCTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING 8504 40 - STATIC CONVERTERS CN CODE 850440 90 - OTHER THAN OF A KIND USED WITH TELECOMMUNICATION APPARATUS, AUTOMATIC DATA-PROCESSING MACHINES AND UNITS THEREOF: OTHER THAN ACCUMULATOR CHARGERS: OTHER THAN RECTIFIERS OR INVERTERS TARIC 85044090 25 - DIRECT CURRENT TO DIRECT CURRENT CONVERTER - WITHOUT HOUSING OR - WITH HOUSING WITH CONNECTION PINS, CONNECTION STUDS, SCREW CONNECTORS, UNPROTECTED LINE CONNECTIONS, CONNECTION ELEMENTS WHICH ALLOW THE MOUNTING TO A PRINTED CIRCUIT BOARD BY SOLDERING OR ANY OTHER TECHNOLOGY, OR OTHER WIRING CONNECTIONS REQUIRING FURTHER PROCESSING ALSO CLASSIFIED IN ACCORDANCE WITH:- HARMONIZED SYSTEM EXPLANATORY NOTES (HSEN) (II) (D) TO HEADING 85.04

BTI Reference:
GBBTI503642966.
Start date of validity:
.
End date of validity:
2020-10-30.

National keywords: MISCELLANEOUS ELECTRICAL EQUIPMENT FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING

A DC TO HIGH VOLTAGE DC CONVERTER IN A COMPACT,…

A DC TO HIGH VOLTAGE DC CONVERTER IN A COMPACT, PCB MOUNT PACKAGE. THE INPUT VOLTAGE IS 0-12V.

THE OUPUT VOLTAGE IS 0 -1.2 kV, OUTPUT CURRENT 2.5 mA. THE OUTPUT VOLTAGE IS DIRECTLY PROPORTIONAL TO THE INPUT VOLTAGE AND IS LINEAR.

IT FEATURES LOW RIPPLE, NOISE, AND EMI/RFI BY UTILISING A QUASI SINEWAVE OSCILLATOR, EXCELLENT FILTERING TECHNIQUES AND A FULLY ENCLOSED POT CORE TRANSFORMER.

THE INPUT/OUTPUT ARE ISOLATED. THE CONVERTER IS SOLDERED ON TO THE PCB BOARD VIA STUDS.

BTI Reference:
GBBTI503642868.
Start date of validity:
.
End date of validity:
2020-10-30.

National keywords: FOR PRINTED CIRCUITS STATIC CONVERTERS FOR SOLDERING

DC/DC POWER SUPPLY WITH INPUT VOLTAGES FROM…

DC/DC POWER SUPPLY WITH INPUT VOLTAGES FROM 90-560VAC PROVIDING DC OUTPUT VOLTAGES BELOW 300V DC WITH A POWER RANGE OF 2 WATT TO 2,000 WATTS

Classification justification: GIR 1&6 TEXT TO HEADING 8504 40 CNEN TO 8504 40 90

BTI Reference:
IE17NT-14-5249-01.
Start date of validity:
.
End date of validity:
2020-08-14.

National keywords: ELECTRIC

DC/DC CONVERTER

DC/DC CONVERTER

Classification justification: GIR 1&6 TEXT TO HEADING 8504 40 CNENS TO 8504 40 90 HSENS 8504

BTI Reference:
IE17NT-14-5055-02.
Start date of validity:
.
End date of validity:
2020-04-12.

National keywords: ELECTRIC

REDUNDANCY & PARALLEL MODE ADD-ON MODULE…

REDUNDANCY & PARALLEL MODE ADD-ON MODULE THAT ALLOWS TWO TPC POWER SUPPLIES OF THE SAME TYPE TO SHARE THE OUTPUT LOAD CURRENT. THE MODULE ALSO PROVIDES REDUNDANCY, AS IT ENSURES THE FULL LOAD CURRENT IS SUPPLIED EVEN IF ONE OF THE POWER SUPPLIES FAILS - VOLTAGE NOT EXCEEDING 1,000V

Classification justification: GENERAL INTERPRETATIVE RULES 1 & 6 THE HARMONISED SYSTEM EXPLANATORY NOTES TO HEADING: 8504, NOTE (II) (D) THE TEXT TO TARIC CODES: 8504 40 90 20

BTI Reference:
IE17NT-14-5054-05.
Start date of validity:
.
End date of validity:
2020-04-12.

National keywords: CONVERTERS FOR INDUSTRIAL USE STATIC CONVERTERS POWER SUPPLY UNITS