Other / For measuring or checking pressure.

A LOW/HIGH PRESSURE ROTOWINK, USED TO VISUALLY…

with visual signal; pneumatic; air; for measuring pressure; pressure…with visual signal; pneumatic; air; for measuring pressure; pressure…

A LOW/HIGH PRESSURE ROTOWINK, USED TO VISUALLY INDICATE THE OPERATING STATUS IN INDUSTRIAL PNUEMATIC SYSTEMS.

THE PRESENCE OR ABSENCE OF A PNEUMATIC SIGNAL (SYSTEM PRESSURE) IS SHOWN VISUALLY WITH AN ACTUATED COLOUR OR AN UNACTUATED COLOUR., WITH A WIDE ANGLE OF VISIBILITY.

THE VISUAL INDICATOR IS DIAPHRAGM OPERATED. THE MEDIUM USED CAN BE COMPRESSED, FILTERED, DRY OR LUBRICATED AIR.

DIFFERENT MODELS ARE AVAILABLE IN A RANGE OF COLOURS, WITH CONTRASTING COLOUR COMBINATIONS FOR POSITIVE IDENTIFICATION.

THE ROTO WINK HAS A MOULDED PLASTIC BODY AND INTERNAL COMPONENTS, (BRASS CONNECTOR ON HIGH PRESSURE TYPE) STEEL SPRING AND SYNTHETIC RUBBER DIAPHRAGM.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9026 - INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING THE FLOW, LEVEL, PRESSURE OR OTHER VARIABLES OF LIQUIDS OR GASES (FOR EXAMPLE, FLOW METERS, LEVEL GAUGES, MANOMETERS, HEAT METERS), EXCLUDING INSTRUMENTS AND APPARATUS OF HEADING 9014, 9015, 9028 OR 9032 GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 9026 20 - FOR MEASURING OR CHECKING PRESSURE CN CODE 902620 80 - OTHER THAN ELECTRONIC OR SPIRAL OR METAL DIAPHRAGM TYPE TARIC 9026208090 - OTHER THAN FOR USE IN CIVIL AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HARMONIZED SYSTEM EXPLANATORY NOTE (III) TO HEADING 9026

BTI Reference:
GB502149388.
Start date of validity:
.
End date of validity:
2020-11-05.

National keywords: WITH VISUAL SIGNAL PNEUMATIC AIR FOR MEASURING PRESSURE PRESSURE SENSORS

AN OIL PRESSURE OR THERMOMETRICS SWITCH USED…

switching apparatus; sensors; for measuring pressure; for liquids

AN OIL PRESSURE OR THERMOMETRICS SWITCH USED TO MONITOR THE ENGINE OIL FLOW WHEN THE ENGINE STARTS.

IT CAN DETECT OIL PRESSURE AND ENABLES THE ENGINE MANAGEMENT SYSTEM TO CHECK FOR THE LACK OF OIL.

IT CAN ALSO SEND AN ALARM SIGNAL TO THE DRIVER VIA A WARNING LIGHT, HELPING TO AVOID ENGINE DAMAGE DUE TO OVERHEATING.

ITEM WEIGHT: 4 OUNCES/100GRAMS

Classification justification: CLASSIFICATION IS DETERMINED ACCORDING TO GIR'S 1 & 6. CN: 90262020, OTHER ELECTRONIC INSTRUMENTS FOR MEASURING OR CHECKING PRESSURE OF LIQUIDS OR GASES.

BTI Reference:
GB119825552.
Start date of validity:
.
End date of validity:
2016-08-09.

National keywords: SWITCHING APPARATUS SENSORS FOR MEASURING PRESSURE FOR LIQUIDS

PRODUCT IS A MECHANICAL AIR LINE GUAGE FOR…

PRODUCT IS A MECHANICAL AIR LINE GUAGE FOR TYRE INFLATION.

Classification justification: CLASSIFICATION IS DETERMINED BY GENERAL RULES 1 AND 6 TOGETHER WITH THE TEXT TO CN CODES 9026 902620 AND 90262080

BTI Reference:
GB116329191.
Start date of validity:
.
End date of validity:
2013-02-28.

PRODUCT IS A HAND HELD LINEAR AIR LINE GUAGE…

PRODUCT IS A HAND HELD LINEAR AIR LINE GUAGE . IT IS A TYRE INFLATION DEVICE AND HAS AN ENHANCED VALVE MECHANISM WHICH REDUCES AIR RESISTANCE ALLOWING THE UNIT TO PROVIDE HIGHER RATES OF INFLATION AND DEFLATION

BTI Reference:
GB116148686.
Start date of validity:
.
End date of validity:
2013-02-28.

PRESSURE GAUGE

PRESSURE GAUGE

Classification justification: GIR'S 1 AND 6

BTI Reference:
IE01NT-14-1104-20A1.
Start date of validity:
.
End date of validity:
2012-05-23.

National keywords: GAUGES FOR MEASURING PRESSURE

A DIFFERENTIAL PRESSURE TRANSDUCER WHICH…

A DIFFERENTIAL PRESSURE TRANSDUCER WHICH INCORPORATES INTEGRATED CIRCUITS AND A FUSED SILICON MONOLITHIC CAVITY PRESSURE SENSOR. PROVIDES A HIGH-LEVEL, FULLY CONDITIONED AND TEMPERATURE COMPENSATED OUTPUT AND THREE FIELD SELECTABLE PRESSURE RANGES IN ONE UNIT.

Classification justification: CLASSIFICATION IS DETERMINED BY THE PROVISIONS OF GENERAL INTERPRETATIVE RULES 1 AND 6 AS WELL AS THE TEXT OF HEADINGS 9026 AND 902620.

BTI Reference:
GB115504015.
Start date of validity:
.
End date of validity:
2012-05-22.

DUCT PRESSURE TRANSDUCER. INCORPORATES INTEGRATED…

DUCT PRESSURE TRANSDUCER. INCORPORATES INTEGRATED CIRCUITS. PROVIDES A HIGH LEVEL, FULLY CONDITIONED AND TEMPERATURE COMPENSATED OUTPUT AS WELL AS FIELD SELECTAVBLE FLEXIBILITY.OFFERS UP TPO THREE FIELD SELECTABLE PRESSURE RANGES IN ONE UNIT.

BTI Reference:
GB115503900.
Start date of validity:
.
End date of validity:
2012-05-22.

MACHINE WHICH IS USED TO PRESSURE TEST GLASS…

MACHINE WHICH IS USED TO PRESSURE TEST GLASS OR PLASTIC BEVERAGE BOTTLES. IT IS USED IN THE QUANTITY CONTROL LABORATORIES OF BOTTLE MANUFACTURERS OR BOTTLE FILLERS.

Classification justification: GIRS 1 AND 6, TEXT TO 9026

BTI Reference:
IE06NT-14-180-3.
Start date of validity:
.
End date of validity:
2012-04-26.

National keywords: PLASTICS FOR TESTING BOTTLES GLASS

GAUGE PRESSURE TRANSMITTER. TRANSMITTER ACCURATELY…

GAUGE PRESSURE TRANSMITTER. TRANSMITTER ACCURATELY MEASURES GAUGE PRESSURE AND TRANSMITS A STANDARD PNEUMATIC SIGNAL TO RECEIVERS. INDUSTRIAL PROCESS CONTROL INSTRUMENT.

Classification justification: GIR 1 TERMS OF HEADING 9026 INCLUDES S AND APPARATUS FOR MEASURING OR CHECKING THE FLOW, PRESSURE OR OTHER VARIABLES OF LIQUIDS OR GASES.

GIR 6 TERMS OF ONE DASH S/H 9026.20 FOR MEASURING OR CHECKING PRESSURE. CN CODE 902620.80 OTHER THAN SPIRAL OR METAL DIAPHRAM TYPE PRESSURE GAUGES.

OTHER - THAN USE IN CIVIL AIRCRAFT. TARIC 9026208090.

BTI Reference:
GB115077786.
Start date of validity:
.
End date of validity:
2012-02-06.

National keywords: TRANSMITTERS

DIFFERENTIAL PRESSURE TRANSMITTER. MEASURES…

DIFFERENTIAL PRESSURE TRANSMITTER. MEASURES DIFFERENTIAL PRESSURE WITH SPANS OF UP TO 14 MPa, 2000 psi OR 140 BAR.. TRANSMITS A STANDARD PNEUMATIC SIGNAL TO RECEIVERS. INDUSTRIAL PROCESS CONTROL INSTRUMENT.

Classification justification: GIR 1 TERMS OF HEADING 9026 INCLUDES S AND APPARATUS FOR MEASURING OR CHECKING THE FLOW, PRESSURE OR OTHER VARIABLES OF LIQUIDS OR GASES.

GIR 6 TERMS OF ONE DASH S/H 9026.20 FOR MEASURING OR CHECKING PRESSURE. CN CODE 902620.80 OTHER THAN SPIRAL OR METAL DIAPHRAM TYPE PRESSURE GAUGES.

OTHER - THAN USE IN CIVIL AIRCRAFT. TARIC 9026208090.

BTI Reference:
GB115077884.
Start date of validity:
.
End date of validity:
2012-02-06.

National keywords: TRANSMITTERS