Other / Parts and accessories / Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors.

DIE CAST ALUMINIUM ENCLOSURE, USED IN THE…

DIE CAST ALUMINIUM ENCLOSURE, USED IN THE MANUFACTURE OF A NETWORK ANALYSER. THE ENCLOSURE IS DESIGNED TO ACCOMMODATE A 50MM PRINTED CIRCUIT BOARD. DIMENSIONS OF ENCLOSURE: 80MM X 54MM X 23MM.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9030 - OSCILLOSCOPES, SPECTRUM ANALYSERS AND OTHER INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING ELECTRICAL QUANTITIES, EXCLUDING METERS OF HEADING 9028; INSTRUMENTS AND APPARATUS FOR MEASURING OR DETECTING ALPHA, BETA, GAMMA, X-RAY, COSMIC OR OTHER IONISING RADIATIONS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903090 - PARTS AND ACCESSORIES.

CN CODE 90309085 - OTHER THAN FOR APPARATUS OF SUBHEADING 90308200. TARIC CODE 9030908590 - OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCORDANCE WITH:- GENERAL SECTION OR CHAPTER NOTES NOTE 2(B) TO CHAPTER 90

BTI Reference:
GB123286388.
BTI Reference:
GB123286290.
Start date of validity:
.
End date of validity:
2016-12-31.

National keywords: HOUSINGS OF ALUMINIUM

HEART RATE SENSOR STRAP, CONNECTS VIA BLUETOOTH,…

HEART RATE SENSOR STRAP, CONNECTS VIA BLUETOOTH, SIGNALS SENT TO PORTABLE TABLET PC OR MOBILE PHONE DEVICES TO DISPLAY, ANALYSE AND RECORDING DATA. WITHOUT DISPLAY.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9030 - OSCILLOSCOPES, SPECTRUM ANALYSERS AND OTHER INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING ELECTRICAL QUANTITIES, EXCLUDING METERS OF HEADING 9028; INSTRUMENTS AND APPARATUS FOR MEASURING OR DETECTING ALPHA, BETA, GAMMA, X-RAY, COSMIC OR OTHER IONISING RADIATIONS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903090 - PARTS AND ACCESSORIES.

CN CODE 90309085 - OTHER THAN FOR APPARATUS OF SUBHEADING 90308200. TARIC CODE 9030908590 - OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCORDANCE WITH EC REG 1212/2013

BTI Reference:
GB502723678.
Start date of validity:
.
End date of validity:
2021-12-14.

National keywords: ELECTRONICS WITHOUT SCREEN

LASER TRACKER HOLDERS MADE OF STAINLESS STEEL.…

LASER TRACKER HOLDERS MADE OF STAINLESS STEEL. SPECIFICALLY DESIGNED TO HOLD A SPHERICALLY MOUNTED RETRO REFLECTOR, OR OTHER SPHERICAL TYPE TARGETS FOR THE PURPOSE OF LOCATING OUTSIDE CORNERS.

THESE TARGETS ARE POSITIONED (MAGNETISED) ON A JIG OR TOOL WHICH NEED MEASURING TO ENABLE THE REFLECTOR TO BE POSITIONED.

THE MEASUREMENT DEVICE (TRACKERS) IS THEN SET TO TAKE MEASUREMENTS OF THE JIG/TOOL

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9030 - OSCILLOSCOPES, SPECTRUM ANALYSERS AND OTHER INSTRUMENTS AND APPARATUS FOR MEASURING OR CHECKING ELECTRICAL QUANTITIES, EXCLUDING METERS OF HEADING 9028; INSTRUMENTS AND APPARATUS FOR MEASURING OR DETECTING ALPHA, BETA, GAMMA, X-RAY, COSMIC OR OTHER IONISING RADIATIONS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903090 - PARTS AND ACCESSORIES.

CN CODE 90309085 - OTHER THAN FOR APPARATUS OF SUBHEADING 90308200. TARIC CODE 9030908590 - OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCORDANCE WITH :- GENERAL NOTE (2) TO CHAPTER 90 HSEN NOTE TO CHAPTER 9031

BTI Reference:
GB502672666.
Start date of validity:
.
End date of validity:
2021-10-13.

National keywords: OF STAINLESS STEEL TOOL HOLDERS

A REFLECTOR HOLDER. THE PRODUCT IS A LASER…

A REFLECTOR HOLDER. THE PRODUCT IS A LASER TRACKER HOLDER DESIGNED TO HOLD A SPHERICALLY MOUNTED RETRO REFLECTOR, OR OTHER SPHERICAL TYPE TARGETS FOR THE PURPOSE OF LOCATING OUTSIDE CORNERS.

THESE TARGETS ARE POSITIONED (MAGNETISED) ON A JIG OR TOOL WHICH NEEDS MEASURING TO ENABLE THE REFLECTOR TO BE POSITIONED.

THE MEASUREMENT DEVICE (TRACKER) IS THEN SET TO TAKE MEASUREMENTS OF THE JIG/TOOL. THE PRODUCT IS MADE FROM STAINLESS STEEL.

BTI Reference:
GB502465867.
Start date of validity:
.
End date of validity:
2021-07-05.

National keywords: OF STAINLESS STEEL TOOL HOLDERS

LASER TRACKER HOLDERS MADE OF STAINLESS STEEL.…

LASER TRACKER HOLDERS MADE OF STAINLESS STEEL. SPECIFICALLY DESIGNED TO HOLD A SPHERICALLY MOUNTED RETRO REFLECTOR, OR OTHER SPHERICAL TYPE TARGETS FOR THE PURPOSE OF LOCATING OUTSIDE CORNERS.

THESE TARGETS ARE POSITIONED (MAGNETISED) ON A JIG OR TOOL WHICH NEEDS MEASURING TO ENABLE THE REFLECTOR TO BE POSITIONED.

THE MEASUREMENT DEVICE (TRACKER) IS THEN SET TO TAKE MEASUREMENTS OF THE JIG/TOOL.

BTI Reference:
GB502465671.
Start date of validity:
.
End date of validity:
2021-07-05.

National keywords: OF STAINLESS STEEL TOOL HOLDERS

A SENSOR FOR DETECTING THE PRESENCE OF NUTS…

A SENSOR FOR DETECTING THE PRESENCE OF NUTS AND THREADS IN THE PRODUCTION OF CAR BODY PARTS. WITH A PROBE FOR EASY DETECTION, IT CAN BE CALIBRATED TO DETECT THREAD QUALITY. SENDS SIGNALS TO A MONITOR VIA A CABLE

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903190 PARTS AND ACCESSORIES CN CODE 90319085 OTHER THAN FOR APPARATUS OF SUBHEADING FOR OPTICAL INSTRUMENTS AND APPLIANCES FOR MEASURING SURFACE PARTICULATE CONTAMINATION ON SEMICONDUCTOR WAFERS OF SUBHEADING 9031 49 90.

OTHER THAN FOR APPARATUS OF SUBHEADING 9031 80 32 TARIC CODE 9031908590 OTHER THAN ELSEWHERE SPECIFIED IN THIS HEADING

BTI Reference:
GB502181788.
Start date of validity:
.
End date of validity:
2020-12-03.

National keywords: ELECTRONIC SENSORS WITH MEASURING DEVICE

A SENSING DEVICE WHICH ADHERES TO THE BODY…

A SENSING DEVICE WHICH ADHERES TO THE BODY AND IS USED TO CAPTURE DATA IN ORDER TO MEASURE LEVELS OF SPECIFIC BODY ACTIVITIES.

IT INCLUDES A USB PORT TO ENABLE THE USER UPLOAD THE DATA TO A COMPUTER USING SPECIAL SOFTWARE.

AFTER PROCESSING, THE DATA CAN BE DISPLAYED ON THE COMPUTER SCREEN. THE SOFTWARE AND THE COMPUTER ARE NOT IMPORTED WITH THE DEVICE.

Classification justification: GENERAL RULES 1 AND 6 FOR THE INTERPRETATION OF THE COMBINED NOMENCLATURE. THE TEXT TO TARIC CODES 9031, 9031 90, 9031 90 85 AND 9031 90 85 90. EU REGULTION 1212/2013. THE HARMONISED SYSTEM EXPLANATORY NOTES TO HEADING 9031.

BTI Reference:
IE14NT-14-2355.
Start date of validity:
.
End date of validity:
2020-07-27.

National keywords: SCIENTIFIC AND MEASURING EQUIPMENT SENSORS

SCREEN: THIS SCREEN IS A CIRCULAR FROSTED…

SCREEN: THIS SCREEN IS A CIRCULAR FROSTED PANE OF GLASS MADE SPECIFICALLY FOR A COMPARATOR. THE COMPARATOR IS A MACHINE USED TO CHECK CONTACT LENSES FOR DEFECTS.

Classification justification: GIR'S 1 & 6 TEXT TO HEADING 9031 90 NOTE 2 (b) TO CHAPTER 90

BTI Reference:
IE14NT-14-2375-01.
Start date of validity:
.
End date of validity:
2020-06-18.

National keywords: LENSES GLASS

CHUCKS THAT ARE SPECIALLY DESIGNED TO HOLD…

CHUCKS THAT ARE SPECIALLY DESIGNED TO HOLD COMPONENTS ON A BALANCING MACHINE. MADE OF STEEL. IS A HIGHLY ACCURATE PRECISION ITEM THAT CAN REPEAT TO VERY SMALL TOLERANCES.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 - MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903190 - PARTS AND ACCESSORIES.

CN CODE 903190 85 - OTHER. TARIC CODE 90319085 90 - OTHER ALSO CLASSIFIED IN ACCORDANCE WITH: SECTION XVIII NOTE 2 (b) REFERS.

THE HSEN'S TO HEADING 9031 REFERS.

BTI Reference:
GB123853085.
Start date of validity:
.
End date of validity:
2020-05-01.

National keywords: OF STEEL PRECISION EQUIPMENT