Other / Other instruments, appliances and machines.

BLEED AND OVERHEAT MONITORING SYSTEM. FOR…

BLEED AND OVERHEAT MONITORING SYSTEM. FOR USE IN AIRCRAFT. THE MAIN FUNCTION OF WHICH IS TO PREVENT DAMAGE FROM TOO MUCH HEAT AND PRESSURE, PREVENTS ICE BUILD UP (ON WINGS), MONITORS THE SYSTEM TO CREW OR MAINTENANCE PERSONNEL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING: GENERAL INTERPRETATIVE RULES (GIRS): GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031: MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS.

GIR 3C HAS BEEN USED AS IT IS CONSIDERED THERE IS NO ESSENTIAL CHARACTER AND THEREFORE HAS BEEN CLASSIFIED TO LAST IN NUMERICAL ORDER WITHIN THE TARIFF GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903180 OTHER INSTRUMENTS, APPLIANCES AND MACHINES.

CN CODE 90318038 ELECTRONIC; OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES. TARIC CODE 9031803890 OTHER THAN FOR USE IN CIVIL AIRCRAFT OR ACCELERATION MEASUREMENT DEVICES FOR AUTOMOTIVE APPLICATIONS, COMPRISING ONE OR MORE ACTIVE AND/OR PASSIVE ELEMENTS AND ONE OR MORE SENSORS, THE WHOLE CONTAINED IN A HOUSING.

ALSO CLASSIFIED IN ACCORDANCE WITH THE HSENS OF HEADING 9031.

BTI Reference:
GB503334685.
Start date of validity:
.
End date of validity:
2016-12-31.

National keywords: TRANSPORT EQUIPMENT AIRCRAFT PARTS ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT

Fibre optic gyroscope is opto-electronic…

Fibre optic gyroscope is opto-electronic sensor for measuring angular rate based on the sagnac effect.

Each fibre optic gyroscope consists of the following main components: fibre optic winding on a bobbin, light source in the form of a super luminescent diode, optic couplers, optical polarizer, piezoceramic modulator photo-diode and processing electronics.

The gyroscope is normally packed individually and is not for use in civil aircrafts.

Classification justification: Classification is determined by the interpretation of GIRs 1 and 6 to the Combined Nomenclature and by the wording of CN codes: 9031, 9031 80, 9031 80 38 and 9031 80 38 90

BTI Reference:
MT0017-16.
Start date of validity:
.
End date of validity:
2016-12-31.

THIS TORQUE SENSOR IS DESIGNED FOR BOTH STATIC…

THIS TORQUE SENSOR IS DESIGNED FOR BOTH STATIC AND DYNAMIC MEASUREMENTS ON NON-ROTATING APPLICATIONS.

SHEAR STRAINS IN THE TORSION SHAFT ARE MEASURED BY MEANS OF METAL FOIL STRAIN GAUGES CONNECTED ON THE SENSOR ELEMENT.

APPLYING A SUPPLY VOLTAGE GENERATES AN ELECTRICAL OUTPUT SIGNAL THAT IS DIRECTLY PROPORTIONAL TO THE APPLIED MECHANICAL TORQUE.

MEASUREMENT RANGES FROM 0 - 0.005 NM TO 0 - 5000 NM.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 - MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 9031 80 - OTHER INSTRUMENTS, APLLIANCES AND MACHINES CN CODE 903180 38 ELECTRONIC; OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC 90318038 90 - OTHER THAN ELSEWHERE SPECIFIED IN THIS COMMODITY CODE

BTI Reference:
GB503245095.
Start date of validity:
.
End date of validity:
2016-12-31.

National keywords: OF METAL ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT SENSORS

A LEAK METERING SYSTEM PRIMARILY USED TO…

A LEAK METERING SYSTEM PRIMARILY USED TO METER AND INVESTIGATE LEAKS IN DOWNHOLE BARRIERS SUCH AS TUBING, CASING, CEMENT OR DOWNHOLE VALVES USED IN OIL AND GAS WELLS.

THE LMS IS ALSO CAPABLE OF IDENTIFYING FLUID COMPOSITION AND HYDROCARBON STORAGE VOLUMES WHICH IS IMPORTANT FOR RISK ASSSESSMENT AND RISK RANKING STUDIES.

IT HAS A MAXIMUM OPERATING TEMPERATURE OF 200 DEGREE C. MAXIMUM OPERATING PRESSURE OF 5000 psi.

THE SUPPLY VOLTAGE IS 85-260 VAC. DIMENSIONS: 120 MM L X 600 MM D X 850 MM H. WEIGHT: Ca. 200 KG.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 - MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 9031 80 - OTHER INSTRUMENTS, APLLIANCES AND MACHINES CN CODE 903180 38 ELECTRONIC; OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC 90318038 90 - OTHER THAN ELSEWHERE SPECIFIED IN THIS COMMODITY CODE ALSO CLASSIFIED IN ACCORDANCE WITH:- NOTE 3 TO CHAPTER 90 ADDITIONAL NOTE 1 TO CHAPTER 90 HARMONIZED SYSTEM EXPLANATORY NOTES (HSEN) TO HEADING 9031

BTI Reference:
GB503042801.
Start date of validity:
.
End date of validity:
2019-06-13.

National keywords: ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT FOR GASES PRECISION EQUIPMENT FOR LIQUIDS FOR DETECTION

A PROCESSOR/DIGITAL FUEL GAUGE TO COMPUTE…

A PROCESSOR/DIGITAL FUEL GAUGE TO COMPUTE AND DISPLAY THE DATA RELATED TO FUEL LEVEL AND STATUS OF THE MEASURING COMPONENTS AND FUELING VALVES WITHIN AN AIRCRAFT. THE PROCESSOR ALSO TESTS IF THE COMPONENTS IN THE FUEL TANK (MEASURING COMPONENTS AND FUELING VALVES) ARE WORKING PROPERLY.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 - MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 3C HAS BEEN USED AS IT IS CONSIDERED THERE IS NO ESSENTIAL CHARACTER AND THEREFORE HAS BEEN CLASSIFIED TO LAST IN NUMERICAL ORDER WITHIN THE TARIFF.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903180 - OTHER INSTRUMENTS, APPLIANCES AND MACHINES CN CODE 90318038 - ELECTRONIC; OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC CODE 9031803890 - OTHER THAN ELSEWHERE SPECIFIED.

ALSO CLASSIFIED IN ACCORDANCE WITH ADDITIONAL NOTE 1 TO CHAPTER 90 HARMONIZED SYSTEM EXPLANATORY NOTES (HSEN) TO HEADING 9031

BTI Reference:
GB502794843.
Start date of validity:
.
End date of validity:
2022-01-13.

National keywords: ELECTRONIC DIGITAL FOR AIRCRAFT

FITNESS MONITOR TO BE WORN ON WRIST, WITH…

FITNESS MONITOR TO BE WORN ON WRIST, WITH LCD SCREEN, FUNCTION INCLUDE MONITORING DAILY STEPS, DISTANCE, CALORIES BURNT, ACTIVITY TIME, SLEEP PATTERN. WITH CLOCK, ALARM AND 14 DAY MEMORY. BLUETOOTH ENABLED.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; GIR 3B HAS BEEN USED AS THE HEART RATE MONITOR IS CONSIDERED TO BE THE ESSENTIAL CHARACTER..

GIR6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903180 OTHER INSTRUMENTS, APPLIANCES AND MACHINES CN CODE 90319038 OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC CODE 9031803890 OTHER THAN ACCELERATION MEASUREMENT DEVICE FOR AUTOMOTIVE APPLICATIONS ALSO CLASSIFIED IN ACCORDANCE WITH:- EU REGULATION 1212/2013

BTI Reference:
GB502722877.
Start date of validity:
.
End date of validity:
2021-12-14.

A TORQUE VERIFICATION SYSTEMS (TVS). THEY…

A TORQUE VERIFICATION SYSTEMS (TVS). THEY ALLOW THE ROV OPERATOR TO PROVE THE ACCURACY OF A TORQUE TOOL, IMMEDIATELY PRIOR TO AND AFTER OPERATION OF A CLIENT'S VALVE OR ACTUATOR.

TYPICALLY CONSISTS OF BATTERY POWERED 4 DIGIT SUBSEA DISPLAY SYSTEM (SDS), HOUSED IN AN ALUMINIUM ACTUATOR AND A EITHER AN ALUMINIUM OR STEEL TORQUE TRANSDUCER HOUSING.

SDS'S ARE SHIPPED WITH A RANGE OF STAINLESS STEEL ADAPTER STEMS AND CONNECTION CABLES. STANDARD MANUFACTURING METHODS ARE USED FOR MACHINING OF METAL COMPONENTS.

TVS'S ARE USED IN CONJUNCTION WITH EQUIPMENT SUCH AS SUBSEA TORQUE TOOLS. GOODS ARE TYPICALLY SHIPPED IN A PELI 1600 CASE OR PELICAN SPACE CASE WITH A CUSTOM FOAM PACKING SET, BUT OCCASIONALLY SHIPPED IN A WOODEN CRATES.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING GENERAL INTERPRETATIVE RULES (GIR)S GIR1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; GIR3C HAS BEEN USED BECAUSETHIS PRODUCT CARRIES OUT DIFFERENT FUNCTIONS, ALL OF EQUAL MERIT.

GIR6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903180 OTHER INSTRUMENTS, APPLIANCES AND MACHINES CN CODE 90318038 OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC CODE 9031803890 OTHER THAN ACCELERATION MEASUREMENT DEVICE FOR AUTOMOTIVE APPLICATIONS ALSO CLASSIFIED IN ACCORDANCE WITH THE SCOPE OF HSEN'S TO HEADING 9031

BTI Reference:
GB502613002.
Start date of validity:
.
End date of validity:
2021-09-02.

CAMERA TRACKING SYSTEM. THE PRODUCT IS USED…

CAMERA TRACKING SYSTEM. THE PRODUCT IS USED TO DETECT SUBTLE MOVEMENTS IN A DIGITAL BROADCAST PRODUCTION CAMERA VIA A SENSOR BAR.

THE SENSOR BAR PROVIDES REAL TIME POSITION AND ROTATION INFORMATION FROM THE CAMERA. THE DATA IS THEN FED BACK VIA AN ETHERNET TETHER CABLE TO A SEPARATE SERVER INTERFACE.

THE DEVICE IS DESIGNED PRIMARILY FOR BROADCASTERS WANTING TO USE VIRTUAL GRAPHICS OR AUGMENTED REALITY, BUT ONLY NEED PAN, TILT AND ZOOM FUNCTIONALITY, RATHER THAN COMPLETE FREEDOM OF MOVEMENT.

CONVENTIONAL PAN, TILT AND ZOOM HEADS PROVIDE A GOOD DEGREE OF TRACKING FOR AUGMENTED REALITY, BUT ARE LIMITED TO TRACKING MOVEMENT OF THE HEAD ITSELF.

THE PRODUCT IS USED TO DETECT SUBTLE MOVEMENTS IN THE CAMERA AND NOT THE CAMERA HEAD. THE LIGHTWEIGHT SENSOR BAR ALLOWS THE CAMERA TO MOVE FREELY AT ALL TIMES, GENERATING A CONTINUOUS STREAM OF PRECISE POSITIONAL INFORMATION, WHICH FEEDS REAL TIME GRAPHICS ENGINE, OR ON MOVIE SETS A PRE-VISUALISATION SYSTEM TO MATCH LIVE AND VFX ELEMENTS.

USED IN VIRTUAL PRODUCTION TECHNOLOGY APPLICATIONS, FOR FILM, TELEVISION AND BROADCAST INDUSTRIES.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 FOR MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 9031 80 FOR OTHER INSTRUMENTS, APPLIANCES AND MACHINES CN CODE 90318038 - ELECTRONIC; OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC CODE 9031803890 - OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING

BTI Reference:
GB502555180.
Start date of validity:
.
End date of validity:
2021-07-28.

National keywords: ELECTRONIC SENSORS MOVEMENT SENSORS CAMERAS WITH MEASURING DEVICE

A GAME ACCESSORY. CONSISTS OF AN ACTIVITY…

A GAME ACCESSORY. CONSISTS OF AN ACTIVITY SENSOR THAT IS ATTACHED TO THE USERS CLOTHING AND VIA AN ACCELEROMETER DETECTS IF THERE IS ANY ACTIVITY/MOTION.

WITH MAINS CHARGER. IF MOTION IS DETECTED, IT ALLOWS, VIA A BLUETOOTH CONNECTION, THE USER TO ACCESS AN ONLINE NETWORK OF GAMES AND APPS.

THESE GAMES/APPS WILL BE ON A TABLET OR SMARTPHONE (WHICH IS SEPARATE FROM THIS BTI RULING).

THROUGH THE USE OF THE GAMES AND THE NETWORK, USERS STEPS AND ACTIVITY ARE TRACKED AND STORED FOR LATER COMPARISON, REWARDS AND COMPETITION.

ALSO HAS TWO, TWO BUTTON CONTROLLERS (BATTERY OPERATED). ITEM IS INTENDED TO HELP PEOPLE TO STICK TO AN EXERCISE PROGRAM.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9031 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; GIR6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903180 OTHER INSTRUMENTS, APPLIANCES AND MACHINES CN CODE 90319038 OTHER THAN FOR MEASURING OR CHECKING GEOMETRICAL QUANTITIES TARIC CODE 9031803890 OTHER THAN ACCELERATION MEASUREMENT DEVICE FOR AUTOMOTIVE APPLICATIONS

BTI Reference:
GB502508485.
Start date of validity:
.
End date of validity:
2021-07-22.

National keywords: ELECTRONIC NEW CONTROLLERS

AN ULTRASONIC TRANSDUCER, CONSISTING OF AN…

AN ULTRASONIC TRANSDUCER, CONSISTING OF AN INTERNAL CERAMIC CONE AND ALUMINIUM HOUSING, USED IN A CABLE HEIGHT METER TO MEASURE THE HEIGHT OF OVERHEAD CABLES THROUGH SOUND WAVES. RESONANT FREQUENCY: 25KHZ; EXTERNAL DIAMETER: 16.2 MM; EXTERNAL HEIGHT: 12 MM.

Classification justification: CLASSIFICATION IS DETERMINED BY THE PROVISIONS OF THE GENERAL RULES 1 AND 6 FOR THE INTERPRETATION OF THE COMBINED NOMENCLATURE; THE TEXT OF CODES 9031, 9031 80, 9031 80 38; THE HARMONISED SYSTEM EXPLANATORY NOTES TO HEADING 9031;

BTI Reference:
IE14NT-14-2712-01.
Start date of validity:
.
End date of validity:
2021-06-08.

National keywords: CABLES