Other / Other articles of iron or steel.

Български 6 Čeština 84 Dansk 39 Deutsch 2062 Ελληνικά 3 Español 44 Suomi 27 Français 985 Hrvatski 8 Magyar 24 Italiano 101 Lietuvių 2 Latviešu 1 Nederlands 165 Polski 186 Română 24 Slovenčina 7 Slovenščina 2 Svenska 71

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED…

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED TO BE FITTED TO A TELEVISION CAMERA PEDESTAL. THE WHEELS ENABLE THE PEDESTAL TO BE MOVED QUICKLY WHEN REQUIRED IN OUTSIDE BROADCAST SETTINGS.

THE TYRES ARE MADE OF RUBBER AND THE WHEELS AND AXLES ARE MADE OF STEEL. THE PIVOT BLOCK/AXLE HOLDER IS MADE OF ALUMINIUM.

THE WHEELS ARE 6" IN DIAMETER AND APPROXIMATELY 6" WIDE WITHOUT THE CABLE GUARD.

Start date of validity:
.

National keywords: OF METAL OF STEEL FOR PROFESSIONAL USE TELEVISION CAMERAS CAMERAS WHEELS

Rupture disk (made of stainless steel) This…

Rupture disk (made of stainless steel) This bursting disk is a thin disk of steel used as a safety device.

There are mounted by means of a special carrier on pipe systems or pressure vessels and burst at a specific pressure.

They are available in a range of diameters from 25 - 200mm and burst pressures from 2 -34 bar.

Start date of validity:
.

National keywords: OF STEEL OF STAINLESS STEEL STAINLESS STEELS SAFETY EQUIPMENT

THE PRODUCT IS A DESK TOP SCREEN DIVIDER.…

THE PRODUCT IS A DESK TOP SCREEN DIVIDER. ITS PURPOSE IS TO PROVIDE PROTECTION FOR ANYONE SITTING AT THEIR DESK POSITION, FROM OTHERS, IN CLOSE PROXIMITY TO THEM.

IT IS MANUFACTURED FROM A PVC SHEET/FACE SUPPORTED AND ENCLOSED IN AN ANODISED STEEL FRAME. IT IS MODULAR AND CAN BE USED ON ITS OWN BY APPLYING FEET TO A SINGLE SCREEN, OR BY ATTACHING MULTIPLE SCREENS TOGETHER, BY ATTACHING THEM TO JOINING PIECES.

Start date of validity:
.

National keywords: OF PLASTIC OF METAL WITH METAL FRAMES OF STEEL SCREENS

A MONITOR SPIN STAND WITH BUILT IN COMPARTMENTS…

of plastic; of steel; base metals; for indoor use; stands; monitors;…

A MONITOR SPIN STAND WITH BUILT IN COMPARTMENTS FOR HOLDING SMALL ITEMS OF VALUE OR STATIONARY.

THE STAND ALLOWS YOU TO ADJUST YOUR MONITOR HEIGHT TO PERSONAL COMFORT, TO HELP REDUCE NECK AND EYE STRAIN.

THE PLATFORM FITS MOST WIDESCREEN MONITORS UP TO 18KG, WITH A 360 DEGREE SPINNING CAROUSEL. THE STAND IS MADE OF 83% STEEL AND 16% HIPS (HIGH IMPACT POLYSTYRENE).

DIMENSIONS 320 MM WIDE X 80 MM HIGH X 320 MM DEEP.

Start date of validity:
.

National keywords: OF PLASTIC OF STEEL BASE METALS FOR INDOOR USE STANDS MONITORS MONITOR SCREENS

A BACKPLATE ASSEMBLY, USED FOR MOUNTING AN…

A BACKPLATE ASSEMBLY, USED FOR MOUNTING AN ALARM SYSTEM KEYPAD TO A WALL. THE BACKPLATE IS MADE OF ZINC COATED STEEL. IT DOES NOT CONTAIN ANY ELECTRICAL COMPONENTS. 160MM L X 115MM W X 10MM H

Start date of validity:
.

National keywords: OF STEEL ZINC PLATES MOUNTINGS, METAL PLATED FOR WALLS

Safety Head (made of stainless steel). There…

Safety Head (made of stainless steel). There are specialised steel fittings for holding bursting or rupture disks onto pipe systems or pressure vessels. The disks which are not the subject of this BTI are thin pieces of metal used as safety devices. The disk burst at a specifc pressure.

Start date of validity:
.

National keywords: OF METAL OF STEEL STEELS AS PIECES

AN ACCESSORY DESIGNED FOR USE WITH A HEAVY…

AN ACCESSORY DESIGNED FOR USE WITH A HEAVY DUTY CAMERA TRIPOD. IT ENABLES ADDITIONAL HEIGHT TO BE ADDED TO THE TRIPOD AS REQUIRED. THE ELEVATION UNIT GIVES THE TRIPOD AN ELEVATION OF 46CM/18" WEIGHT 5KGS/11LBS

Start date of validity:
.

National keywords: OF BASE METALS MOUNTINGS, METAL MISCELLANEOUS ARTICLES COLLAPSIBLE

VERTICAL 'A' SHAPED STEEL RACK USED…

of base metals; of stainless steel; stands; for storing

VERTICAL 'A' SHAPED STEEL RACK USED TO HOLD DUMBELLS FOR STORAGE. 2MM HEAVY STEEL SOLID 'A' FRAME DESIGN, RUBBER EDGING TO HOLD THE WEIGHTS, RUBBER FEET. MAX LOAD 200KG, HEIGHT 110CM WIDTH 66CM DEPTH 51 CM. RACK ONLY DOESNT INCLUDE DUMBELLS.

Start date of validity:
.

National keywords: OF BASE METALS OF STAINLESS STEEL STANDS FOR STORING

WRINGER HOLDER ~ HANDLE FOR USE WITH POLYURETHANE…

WRINGER HOLDER ~ HANDLE FOR USE WITH POLYURETHANE SPONGE HEAD (SUPPLIED SEPARATELY). MAIN HANDLE (TUBE) SHAFT MADE FROM AISI304 STAINLESS STEEL PAINTED.

WRINGER MECHANISM (LEVER) MADE FROM AISI304 STAINLESS STEEL. PVC ROLLERS (TO GRIP POLYURETHANE SPONGE).

PVC HAND GRIP. PVC TOP CAP (WITH HOLE TO HANG MOP FOR STORAGE). APPROXIMATELY 1270 MM LONG. PACKAGED IN A POLYBAG WITH LABEL.

Start date of validity:
.

National keywords: HANDLES OF STAINLESS STEEL FOR FLOORS FOR CLEANING CLEANING EQUIPMENT

FABRIC ROLL RACK - TO BE USED TO HOLD AND…

of steel; of base metals; unassembled

FABRIC ROLL RACK - TO BE USED TO HOLD AND STORE ROLLS OF FABRIC. MADE OF STAINLESS STEEL. PRODUCT IS PACKAGED UNASSEMBLED.

Start date of validity:
.

National keywords: OF STEEL OF BASE METALS UNASSEMBLED