Other / Speed indicators and tachometers; stroboscopes.

SPEED SENSOR ASSEMBLY. TO BE USED ON A VEHICLE…

SPEED SENSOR ASSEMBLY. TO BE USED ON A VEHICLE AXLE OF A MOTOR VEHICLE. THE PRODUCT COMPRISES OF A PLASTIC HOUSING WITH INTEGRAL CHIP ELECTRONIC COMPONENT. THE PRODUCT MEASURES THE SPEED OF THE TYRES AND PASSES THE SPEED TO THE ABS AND ESC.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9029 - REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, MILOMETERS, PEDOMETERS AND THE LIKE; SPEED INDICATORS AND TACHOMETERS, OTHER THAN THOSE OF HEADING 9014 OR 9015; STROBOSCOPES.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 902920 - SPEED INDICATORS AND TACHOMETERS; STROBOSCOPES.

CN CODE 90292038 - SPEED INDICATORS AND TACHOMETERS. OTHER THAN SPEED INDICATORS FOR VEHICLES.

TARIC CODE 9029203890 - OTHER THAN FOR USE IN CIVIL AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HARMONISED SYSTEM EXPLANATORY NOTE (HSEN) (B) TO HEADING 9029.

BTI Reference:
GB502765558.
BTI Reference:
GB502765460.
BTI Reference:
GB502765264.
Start date of validity:
.
End date of validity:
2021-12-03.

National keywords: ELECTRONIC SENSORS FOR MOTOR VEHICLES NEW

SPEED SENSOR IS AN ELECTRONIC COMPONENT WHICH…

SPEED SENSOR IS AN ELECTRONIC COMPONENT WHICH IS FITTED INTO THE COMPRESSOR COVER IN A POSITION TO ENABLE IT TO MEASURE THE SPEED OF THE COMPRESSOR. WHEEL IN A TURBOCHARGER.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9029 - REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, MILOMETERS, PEDOMETERS AND THE LIKE; SPEED INDICATORS AND TACHOMETERS, OTHER THAN THOSE OF HEADING 9014 OR 9015; STROBOSCOPES.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 902920 - SPEED INDICATORS AND TACHOMETERS; STROBOSCOPES.

CN CODE 90292038 - SPEED INDICATORS AND TACHOMETERS. OTHER THAN SPEED INDICATORS FOR VEHICLES.

TARIC CODE 9029203890 - OTHER THAN FOR USE IN CIVIL AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HARMONISED SYSTEM EXPLANATORY NOTE (HSEN) (B) TO HEADING 9029.

BTI Reference:
GB123600321.
Start date of validity:
.
End date of validity:
2020-02-02.

National keywords: SPEED INDICATORS

A HEART RATE MONITOR SENSOR COMMUNICATES…

A HEART RATE MONITOR SENSOR COMMUNICATES WITH A GPS SPORT WATCH (NOT PART OF BTI) VIA BLUETOOTH TO DISPLAY VARIOUS DATA, SUCH AS HEART RATE, PERFORMANCE OR SPEED ETC. SUPPLIED WITH CHEST STRAP.

BTI Reference:
GB123005924.
Start date of validity:
.
End date of validity:
2019-07-31.

National keywords: ELECTRONICS WITHOUT SCREEN

CADENCE SENSOR, DESIGNED TO BE MOUNTED ON…

CADENCE SENSOR, DESIGNED TO BE MOUNTED ON A BICYCLE, COMMUNICATE TO A DELICATE GPS SPORT WATCH (NOT PART OF THE BTI) VIA BLUETOOTH TECHNOLOGY. COMPLETE WITH MAGNET MOUNTED IN HOUSING FOR FIXING TO THE WHEEL SPOKE.

BTI Reference:
GB123005532.
Start date of validity:
.
End date of validity:
2019-07-31.

National keywords: OF PLASTIC FOR VEHICLES SPEED INDICATORS MILOMETERS

A HEART RATE MEMORY STRAP/BELT (OR ELECTRO-CARDIOGRAM…

A HEART RATE MEMORY STRAP/BELT (OR ELECTRO-CARDIOGRAM - ECG) MEASURING DEVICE. COMPRISES A WATERPROOF PLASTIC MODULE (CONTAINING A CHIP AND A USER REPLACABLE BATTERY), AND A WASHABLE FABRIC BELT.

WORN AROUND THE CHEST TO COLLECT HEART RATE DATA FROM USER, WHICH CAN BE DISPLAYED ON GYM EQUIPMENT.

MEMORY FUNCTION ALLOWS 16.5 HOURS OF DATA TO BE STORED. PACKAGING INCLUDES (202 X 12 MM) RUBBER WRISTBAND FOR PROMOTIONAL PURPOSES.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9029 - REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, MILOMETERS, PEDOMETERS AND THE LIKE; SPEED INDICATORS AND TACHOMETERS, OTHER THAN THOSE OF HEADING 9014 OR 9015; STROBOSCOPES.

GIR 3B HAS BEEN USED AS THE BELT AND NOT THE WRISTBAND IS CONSIDERED TO BE THE ESSENTIAL CHARACTER.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 902920 - SPEED INDICATORS AND TACHOMETERS; STROBOSCOPES.

CN CODE 90292038 - SPEED INDICATORS AND TACHOMETERS; OTHER TARIC CODE 9029203890 - OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH: NOTE (A) TO THE HSEN'S OF HEADING 9029 REFERS.

BTI Reference:
GB122286590.
Start date of validity:
.
End date of validity:
2018-10-21.

National keywords: ELECTRONIC NEW WITH A RECORDING DEVICE

A MEASURING DEVICE SYSTEM USING LASERS. THE…

A MEASURING DEVICE SYSTEM USING LASERS. THE SYSTEM IS MADE OF A PAIR OF LASER MEASURING DEVICES AND IS DESIGNED TO MEASURE ACCURATE SPEED BETWEEN THE TWO LASER BEAMS.

USED FOR PEDESTRIAN SUB-SYSTEM IMPACT TESTING. IT IS ALSO SUITABLE FOR APPLICATIONS THAT REQUIRE ACCURATE SPEED MEASUREMENT SUCH AS FULL SCALE CRASH TESTS OR COMPONENT SLED TESTS.

WITH AN ACCURACY OF 0.1% IS EASILY ACHIEVABLE. WITH LCD DISPLAY SCREEN. WITH AN INTEGRAL TIMER (CLOCK).

THE OUTPUTS FROM THE LASERS CAN BE CONNECTED TO AN EXTERNAL DATA ACQUISITION SYSTEM. THE LASER ARM CAN BE SET AT ANY ANGLE IN A 200 DEGREE ARC.

THE LASERS CAN BE INTERRUPTED IN EITHR ORDER, SPEEDS CAN BE MEASURED IN ANY TRJECTORY. DETENTS LOCATE COMMON ANGLES USED IN PEDESTRIAN HEADFORM TESTS WITH FINE ANGLE ADJUSTMENT FOR FINAL POSITIONING.

ARMING AND OTHER SET-UP FUNCTIONS ARE VIA AN INFRARED REMOTE CONTROL. THIS ALLOWS TO MAINTAIN POSISTIONAL INTEGRITY THROUGH SET-UP AND ARMING.

THE MEASURING DEVICE INCORPORATES A POWER-FAIL-SAFE TEST MEMORY. WITH ADDED TTL OUTPUTS FROM EACH SENSOR , TIMING SIGNALS CAN BE BACKED UP ONTO A DATA ACQUISITION SYSTEM.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9029 - REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, MILOMETERS, PEDOMETERS AND THE LIKE; SPEED INDICATORS AND TACHOMETERS, OTHER THAN THOSE OF HEADING 9014 OR 9015; STROBOSCOPES.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 902920 - SPEED INDICATORS AND TACHOMETERS; STROBOSCOPES.

CN CODE 90292038 - SPEED INDICATORS AND TACHOMETERS. OTHER THAN SPEED INDICATORS FOR VEHICLES.

TARIC CODE 9029203890 - OTHER THAN FOR USE IN CIVIL AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH: HARMONISED SYSTEM EXPLANATORY NOTE (HSEN) (B) TO HEADING 9029.

BTI Reference:
GB121529009.
Start date of validity:
.
End date of validity:
2018-03-05.

National keywords: INFRARED REMOTE CONTROL SPEED INDICATORS LASERS

A TACHOMETER/HOUR METER/TRIP. FOR USE ON…

A TACHOMETER/HOUR METER/TRIP. FOR USE ON DIESEL ENGINES OR ENGINE PANELS. WITH INTRINSICALLY SAFE MAGNETIC PICKUPS.

THIS MODEL IS A MICROPROCESSOR-BASED 5-DIGIT TACHOMETER, HOUR METER. THE TRIP CAN BE PROGRAMMED TO ACTIVATE ON OVERSPEED, UNDERSPEED (CLASS C), OR HOURS.

UNIT MAY BE PICKUP-POWERED OR DC-POWERED. FEATURES - SELECTABLE OVERSPEED TRIP RESPONSE: SET FOR INSTANTANEOUS RPM, AVERAGE RPM, CLASS-C UNDERSPEED, OR HOURS. - BOTH SIGNAL AND POWER MAY BE DERIVED FROM MAGNETIC PICKUP. - HIGH ACCURACY: 5-DIGIT DISPLAY, 1 RPM RESOLUTION, 100,000 HOUR RANGE. - UNIVERSAL: CAN BE FIELD-CALIBRATED LIKE A DIGITAL WATCH (WITH THE SINGLE PUSH BUTTON) FOR ANY NUMBER OF PULSES PER REVOLUTION, FOR TRIP POINT VALUE, AND FOR PRESET/RESET HOURS. - DISPLAYS SPEED, HOURS, AND THE SETPOINT ON COMMAND. - FAST OVERSPEED REACTION TIME OF 0.1 SECOND (ABOVE 20 HZ INPUT) IS INDEPENDENT OF SENSING GEAR TEETH. - DISPLAY CONTRAST INCREASES WITH INCREASING AMBIENT LIGHT.

IDEAL FOR BOTH INDOOR AND OUTDOOR INSTALLATIONS. - STANDARD SAE CASE SIZE FITS ENGINE PANELS WITH 3-3/8" OPENINGS. - HIGH SHOCK AND VIBRATION RESISTANCE.

GASKETED AND SPRAY PROOF. - HIGHLY RESISTANT TO ELECTRICAL NOISE. SPECIFICATIONS POWER: MAGNETIC PICKUP OR 9-30 VDC.

DISPLAY: 5 ACTIVE DIGITS (0 TO 99999), NON-BLINKING LIQUID CRYSTAL DISPLAY (LCD), 0.4" CHARACTER HEIGHT.

INPUT SIGNAL FREQUENCY: FROM 10 TO 13,000 HZ. INPUT SIGNAL VOLTAGE (WHEN POWERED FROM): A. MAGNETIC PICKUPS - MINIMUM SIGNAL AMPLITUDE IS 4.0 VRMS.

MAXIMUM PERMISSIBLE SIGNAL IS 15 VRMS: THE MTH-103D AUTOMATICALLY LIMITS PICKUP SIGNALS AT APPROXIMATELY 10 VOLTS PEAK-TO-PEAK.

B. DC - NOMINAL 1.5 VRMS SIGNAL SENSITIVITY. TACHOMETER ACCURACY: QUARTZ CRYSTAL-CONTROLLED, 1 RPM RESOLUTION, WITHIN 0.2% UNDER ALL COMBINED ENVIRONMENTAL CONDITIONS.

HOUR METER: 100,000-HOUR RANGE (99,999), 1-HOUR INCREMENTS. DISPLAY IS VISIBLE AND TIME ACCUMULATES ONLY WHEN THE SIGNAL IS APPLIED TO TERMINALS A AND B.

TRIP: SETPOINT VALUE IS FIELD-SETTABLE DIRECTLY IN RPM OR HOURS (COUNT UP OR DOWN). NORMALLY OPEN SOLID-STATE CONTACTS AT TERMINALS 5(+) AND 6(-) CLOSE ON TRIP.

REACTION TIME OF 0.1 SECONDS. MAXIMUM CONTINUOUS CONTACT RATING OF 0.15 AMPS, 400 VDC. TRIP ACCURACY: ±1 UNIT, MAXIMUM.

HOUR METER ACCURACY: 0.2% OF READING. RETAINS COUNT IN MEMORY WHEN SIGNAL OR POWER IS REMOVED.

ISOLATED CIRCUIT: ALL CIRCUITRY IS TOTALLY FLOATING, ISOLATED, AND INSULATED FROM THE CASE AND FROM GROUND.

WEIGHT: 1.0 LB (0.45 KG)

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIRS): GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9029: REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETERS, MILOMETERS, PEDOMETERS AND THE LIKE; SPEED INDICATORS AND TACHOMETERS, OTHER THAN THOSE OF HEADING 9014 OR 9015; STROBOSCOPES.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 9029 20: SPEED INDICATORS AND TACHOMETERS; STROBOSCOPES.

CN CODE 9029 20 38: SPEED INDICATORS AND TACHOMETERS; OTHER THAN SPEED INDICATORS FOR VEHICLES.

TARIC CODE 9029 20 38 90: OTHER THAN FOR USE IN CIVIL AIRCRAFT. ALSO CLASSIFIED IN ACCORDANCE WITH:- GENERAL SECTION OR CHAPTER NOTES NOTE 2(A) TO CHAPTER 90 STATES THAT PARTS OF GOODS OF CHAPTERS 84, 85, 90 AND 91 ARE IN ALL CASES TO BE CLASSIFIED IN THEIR RESPECTIVE HEADINGS.

THIS PART IS ALSO EXCLUDED FROM CHAPTER 84 BY VIRTUE OF NOTE 2(A) TO SECTION XVI WHICH HAS A SIMILAR TEXT TO THE ABOVE NOTE.

HARMONISED SYSTEM EXPLANATORY NOTES PART (III) TO THE GENERAL HSEN TO CHAPTER 90 GIVES DEFINITION TO THE CLASSIFICATION OF PARTS AND ACCESSORIES AS DESCRIBED IN NOTE 2(A) TO CHAPTER 90 (ABOVE).

PART (B) TO THE HSEN TO HEADING 9029 GIVES A DESCRIPTION FOR A TACHOMETER.

BTI Reference:
GB501006915.
Start date of validity:
.
End date of validity:
2017-09-12.

National keywords: DIESEL ENGINES ELECTRONIC

ELECTRONIC DEVICE FOR COUNTING, TIMING AND…

ELECTRONIC DEVICE FOR COUNTING, TIMING AND MEASURING DAILY ACTIVITY. A SENSOR RECORDS MOVEMENT IN THREE DIMENSIONS AND MEASURES THE INTENSITY AND DURATION OF PHYSICAL ACTIVITY, CALORIES BURNED, STEPS TAKEN, DISTANCE TRAVELLED.

IT ALSO TRACKS SLEEP QUALITY BY RECOGNISING DIFFERENT PATTERNS OF MOTIONLESS BY MEASURING AND CONTINUOUSLY CORRELATING MULTIPLE DATA POINTS.

ALL COLLECTED DATA IS UPLOADED VIA THE BASESTATION SUPPLIED TO A WEBSITE WHERE THIS CAN BE VIEWED.

THE DEVICE IS PACKAGED WITH SOFTWARE, BASE STATION, SMALL WOVEN NYLON CARRY CASE AND A WRISTBAND.

ALL PRESENTED IN PLASTIC AND CARDBOARD PACKAGING.

Classification justification: THIS TRACKER DEVICE HAS BEEN CLASSIFIED TO COMMODITY CODE 9029203890 - OTHER SPEED INDICATORS AND TACHOMETERS IN ACCORDANCE WTH THE FOLLOWING GENERAL INTERPRETATIVE RULES: GENERAL INTERPRETATIVE RULES GIR1 HAS BEEN USED TO CLASSIFY THE TRACKER BY THE TERMS OF HEADING 9029 AND ANY RELEVANT SECTION AND CHAPTER NOTES.

GIR 3(b) THIS RULE RELATES TO MIXTURES, COMPOSITE GOODS CONSISTING OF DIFFERENT MATERIALS, COMPOSITE GOODS CONSISTING OF DIFFERENT COMPONENTS AND GOODS PUT UP IN SETS FOR RETAIL SALE.

IN ALL THESE CASES THE GOODS ARE TO BE CLASSIFIED AS IF THEY CONSISTED OF THE MATERIAL OR COMPONENT WHICH GIVES THE ESSENTIAL CHARACTER, INSOFAR AS THIS CRITERION IS APPLICABLE.

THE ESSENTIAL CHARACTER IS CONSIDERED TO BE GIVEN BY THE REVOLUTION COUNTER FUNCTION OF THE PRODUCT.

THE OTHER ITEMS PRESENTED IN THE PACKAGE ARE CONSIDERED TO BE ACCESSORIES TO THE TRACKER DEVICE.

GIR 5(b) HAS BEEN USED TO INCLUDE THE PACKING. GIR 6 HAS BEEN USED TO CLASSIFY TO SUBHEADING LEVEL.

EXCLUSIONS THIS PRODUCT HAS BEEN EXCLUDED FROM COMMODITY CODE 9029100090 AS IT DOES NOT MEET THE TERMS OF THIS CODE.

THIS CODE COVERS REVOLUTION COUNTERS, PRODUCTION COUNTERS, TAXIMETER, MILOMETERS PEDOMETERS AND THE LIKE, WHERE THE APPARATUS INDICATES A TOTAL NUMBER OF UNITS OF ANY KIND.

CODE 902920 COVERS INSTRUMENTS THAT COUNT BUT DIFFERS IN AS MUCH AS IT ALSO MEASURES BY PER UNIT OF TIME (E.G.

REVOLUTIONS PER MINUTE, MILES PER HOUR, METERS PER MINUTE). THIS PRODUCT CAN TRACK HOW LONG IT TAKES TO GO SLEEP AND GIVES A GENERAL 24 HOUR PICTURE OF YOUR DAY FOR EXAMPLE SO WHILE MEASURING MOVEMENT IT IS USING TIME TO CALCULATE THE DATA AND THEREFORE CLASSIFED TO CODE 9029203890.

HARMONISED SYSTEM EXPLANATORY NOTES HARMONISED SYSTEM EXPLANATORY NOTES (HSENS) TO HEADING 9029 NOTE (B) REFERS TO INSTRUMENTS THAT INDICATE THE NUMBER OF REVOLUTIONS, SPEED, OUTPUT ETC PER UNIT OF TIME.

THIS PRODUCT MEETS THE TERMS OF THIS HEADING AS ESSENTIALLY IT COUNTS MOVEMENT AND THE DATA IS RECORDED AGAINST TIME.

BTI Reference:
GB119879814.
Start date of validity:
.
End date of validity:
2016-08-18.

National keywords: PORTABLE ELECTRONIC SENSORS LIQUID CRYSTAL DISPLAYS WITH MEASURING DEVICE