Other / Other appliances / Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves.

1" NPT HAND OPERATED NEEDLE/ ISOLATION…

1" NPT HAND OPERATED NEEDLE/ ISOLATION VALVE, 316 STAINLESS STEEL. A NEEDLE VALVE IS A TYPE OF VALVE HAVING A SMALL PORT AND A THREADED, NEEDLE-SHAPED PLUNGER. IT ALLOWS PRECISE REGULATION OF FLOW, ALTHOUGH IT IS GENERALLY ONLY CAPABLE OF RELATIVELY LOW FLOW RATES.

Classification justification: THE PRESSURE INDEPENDENT CONTROL VALVE HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETIVE RULES (GIRS) GIR 1 HAS BEEN USED TO CLASSIFY THE PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELL, TANKS, VATS OR THE LIKE, (INCLUDING PRESSURE REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE PRODUCT TO SUBHEADING 848180 OTHER APPLIANCES CN CODE 84818059 PROCESS VALVES OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 OTHER THAN AIR CONTROL VALVES, CONSISTING OF A STEPPING MOTOR AND A VALVE PINTLE, FOR THE REGULATION OF IDLE FLOW IN FUEL INJECTION ENGINES.

OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH THE HSEN TO HEADING 8481

BTI Reference:
GB502191001.
Start date of validity:
.
End date of validity:
2020-11-30.

National keywords: OF METAL OF STAINLESS STEEL VALVES

AN HYDRAULIC DIRECTIONAL CONTROL VALVE USED…

AN HYDRAULIC DIRECTIONAL CONTROL VALVE USED WITHIN A HIGH PRESSURE DIE CASTING MACHINE. THE VALVE CONTROLS THE FLOW OF HYDRAULIC OIL WITHIN THE MACHINE. THE VALVE IS MADE OF STEEL

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 FOR TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848180 FOR OTHER APPLIANCES CN CODE 84818059 FOR OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS COMMODITY CODE ALSO CLASSIFIED IN ACCORDANCE WITH HARMONISED SYSTEM EXPLANATORY NOTES (HSEN) TO 8481

BTI Reference:
GB502112422.
Start date of validity:
.
End date of validity:
2020-10-15.

National keywords: OF CAST IRON HYDRAULIC

A DIGITAL VALVE TO CONTROL HYDRAULIC FLUID…

hydraulic

A DIGITAL VALVE TO CONTROL HYDRAULIC FLUID FLOW. THE VALVE INCLUDES A SMALL STEPPING MOTOR. THE VALVE CONTROLS SAFE 620E HYDRAULIC FLUID.

THE VALVE IS FOR FLOW CONTROL, AND CONTROLS HOW FAST IT LETS OIL INTO CYLINDERS. THE CYLINDERS ARE PART OF THE EXTRACTOR OF A HIGH PRESSURE DIE CASTING MACHINE.

THE SPEED OF MOVEMENT OF THE EXTRACTOR IS DETERMINED BY THE VALVE. THE VALVE IS NOT CONSIDERED TO BE MACHINE SPECIFIC.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481: TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES.

GIR 3B HAS BEEN USED AS THE VALVE IS CONSIDERED TO BE THE ESSENTIAL CHARACTER. GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848180: OTHER APPLIANCES; OTHER THAN ELSEWHERE SPECIFIED.

CN CODE: 84818059: PROCESS CONTROL VALVES; OTHER THAN TEMPERATURE REGULATORS. TARIC CODE: 8481805990 OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

ALSO CLASSIFIED IN ACCORDANCE WITH: HSEN TO HEADING 8481 REFERS.

BTI Reference:
GB123821006.
Start date of validity:
.
End date of validity:
2020-05-06.

National keywords: HYDRAULIC

A DIRECTIONAL CONTROL VALVE FOR HYDRAULIC…

of steel; hydraulic

A DIRECTIONAL CONTROL VALVE FOR HYDRAULIC FLUID MOVEMENT. THE VALVE IS MADE OF STEEL. THE VALVE IS PART OF A HIGH PRESSURE DIE CASTING MACHINE. THE VALVE IS NOT MACHINE SPECIFIC AND IS A PART OF GENERAL USE.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481: TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848180: OTHER APPLIANCES; OTHER THAN ELSEWHERE SPECIFIED.

CN CODE 84818059: PROCESS CONTROL VALVES; OTHER THAN TEMPERATURE REGULATORS. TARIC CODE 8481805990: OTHER THAN ELSEWHERE SPECIFIED IN THIS SUBHEADING.

ALSO CLASSIFIED IN ACCORDANCE WITH: HSEN TO HEADING 8481 REFERS.

BTI Reference:
GB123821300.
Start date of validity:
.
End date of validity:
2020-04-24.

National keywords: OF STEEL HYDRAULIC

A DIRECTIONAL CONTROL VALVE USED WITHIN A…

A DIRECTIONAL CONTROL VALVE USED WITHIN A HIGH PRESSURE DIE CASTING MACHINE. THE VALVE CONTROLS THE FLOW OF HYDRAULIC OIL WITHIN THE MACHINE. THE VALVE IS MADE OF STEEL

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 FOR TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848180 FOR OTHER APPLIANCES CN CODE 84818059 FOR OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 FOR OTHER THAN ELSEWHERE SPECIFIED IN THIS COMMODITY CODE ALSO CLASSIFIED IN ACCORDANCE WITH HARMONISED SYSTEM EXPLANATORY NOTES (HSEN) TO 8481

BTI Reference:
GB123793466.
Start date of validity:
.
End date of validity:
2020-04-09.

National keywords: OF STEEL HYDRAULIC

OIL CONTROL VALVE USED ON PETROL ENGINES…

OIL CONTROL VALVE USED ON PETROL ENGINES FOR MOTOR VEHICLES. MADE OF METAL AND PLASTIC.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848180 OTHER APPLIANCES CN CODE 84818059 PROCESS CONTROL VALVES, OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 OTHER THAN ELSE WHERE SPECIFIED ALSO CLASSIFIED IN ACCORDANCE WITH: HSENS: SECTION NOTE XVI (II) PARTS, POINT (4) CHAPTER NOTES TO 8481

BTI Reference:
GB501723390.
Start date of validity:
.
End date of validity:
2020-01-26.

National keywords: OF PLASTIC OF METAL

THE PRODUCT IS A 1/2" NPT (NATIONAL…

THE PRODUCT IS A 1/2" NPT (NATIONAL PIPE THREAD) NEEDLE VALVE, MADE OF 316 STAINLESS STEEL.

A SINGLE ISOLATION HAND VALVE UTILISING METAL TO METAL SEAT AND BODY TO BONNET CONNECTION FOR BUBBLE TIGHT SEALING CAPABILITIES AT BOTH EXTREME PRESSURES AND EXTREME TEMPERATURES.

WORKING PRESSURES ARE 6000 PSI AND 10000 PSI.

Classification justification: THE PRESSURE INDEPENDENT CONTROL VALVE HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETIVE RULES (GIRS) GIR 1 HAS BEEN USED TO CLASSIFY THE PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELL, TANKS, VATS OR THE LIKE, (INCLUDING PRESSURE REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE PRODUCT TO SUBHEADING 848180 OTHER APPLIANCES CN CODE 84818059 PROCESS VALVES OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 OTHER THAN AIR CONTROL VALVES, CONSISTING OF A STEPPING MOTOR AND A VALVE PINTLE, FOR THE REGULATION OF IDLE FLOW IN FUEL INJECTION ENGINES.

OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH THE HSEN TO HEADING 8481

BTI Reference:
GB501600609.
Start date of validity:
.
End date of validity:
2019-09-16.

National keywords: OF STAINLESS STEEL VALVES

SUBSEA VALVE FOR HIGH PRESSURE WATER DELIVERY…

SUBSEA VALVE FOR HIGH PRESSURE WATER DELIVERY DURING SEABED EXCAVATION AND TRENCHING OPERATIONS

Classification justification: THE PRESSURE INDEPENDENT CONTROL VALVE HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETIVE RULES (GIRS) GIR 1 HAS BEEN USED TO CLASSIFY THE PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELL, TANKS, VATS OR THE LIKE, (INCLUDING PRESSURE REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE PRODUCT TO SUBHEADING 848180 OTHER APPLIANCES CN CODE 84818059 PROCESS VALVES OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 OTHER THAN AIR CONTROL VALVES, CONSISTING OF A STEPPING MOTOR AND A VALVE PINTLE, FOR THE REGULATION OF IDLE FLOW IN FUEL INJECTION ENGINES.

OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH THE HSEN TO HEDING 8481

BTI Reference:
GB501305511.
Start date of validity:
.
End date of validity:
2018-10-15.

National keywords: WATER

VARIABLE AIR VOLUME (VAV) PRESSURE INDEPENDENT…

VARIABLE AIR VOLUME (VAV) PRESSURE INDEPENDENT CONTROL VALVE. FOR USE IN FUME HOODS, GENERAL EXHAUST AND ROOM SUPPLY AIR. WITH ALUMINIUM VALVE BODY WITH CONTINUOUS WELDED SEAM. SPRING GRADE STAINLESS STEEL SPRING AND POLYESTER OR PPS SLIDER ASSEMBLY. OPERATING RANGE 32 - 122 DEGREES FAHRENHEIT.

Classification justification: THE PRESSURE INDEPENDENT CONTROL VALVE HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETIVE RULES (GIRS) GIR 1 HAS BEEN USED TO CLASSIFY THE PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELL, TANKS, VATS OR THE LIKE, (INCLUDING PRESSURE REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE PRODUCT TO SUBHEADING 848180 OTHER APPLIANCES CN CODE 84818059 PROCESS VALVES OTHER THAN TEMPERATURE REGULATORS TARIC CODE 8481805990 OTHER THAN AIR CONTROL VALVES, CONSISTING OF A STEPPING MOTOR AND A VALVE PINTLE, FOR THE REGULATION OF IDLE FLOW IN FUEL INJECTION ENGINES.

OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH THE HSEN TO HEDING 8481

BTI Reference:
GB121749382.
Start date of validity:
.
End date of validity:
2018-06-28.

National keywords: OF STEEL OF ALUMINIUM VALVES

TRACTION AND BRAKING CONTROL ASSEMBLY FOR…

TRACTION AND BRAKING CONTROL ASSEMBLY FOR A VEHICLE. PROCESS CONTROL VALVES. VALVES SEND MEASURED AMOUNTS OF FLUID TO INDIVIDUALLY SELECTED WHEELS TO ASSIST IN CONTROLLING TRACTION. WITH ELECTRONIC COMPONENTS.

Classification justification: CLASSIFICATION IS DETERMINED IN ACCORDANCE WITH THE PROVISIONS OF G.I.R.'S 1 AND 6, AS WELL AS THE TEXT OF HEADINGS 8481, 848180, 84818059 AND 8481805990 (VALVES: OTHER APPLIANCES: OTHER: PROCESS CONTROL VALVES: OTHER: OTHER).

HSEN'S TO HEADINGS 84.81, 87.08 AND TO CHAPTER 90 ALSO REFERS.

BTI Reference:
GB119533765.
Start date of validity:
.
End date of validity:
2016-05-20.

National keywords: VALVES FOR VEHICLES FOR LIQUIDS