Other / Flywheels and pulleys, including pulley blocks.

A BACK UP DEVICE. MADE FROM ALUMINIUM. USED…

A BACK UP DEVICE. MADE FROM ALUMINIUM. USED (IN CONJUNCTION WITH A ROPE) FOR FALL ARREST, LINE TENSIONING, HEIGHT SECURITY AND ROPE ASCENDING. THE CAM PROVIDES SELF-PARKING RATHER THAN SELF-TAILING FUNCTION. APPROX SIZE 90 X 85 X 28 MM. WEIGHT 210 G. RATED CAPACITY 140 KG (RESCUE 240 KG).

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING: GENERAL INTERPRETATIVE RULES (GIR) GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8483, TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS AND CRANK SHAFTS) AND CRANKS, BEARING HOUSINGS AND PLAIN SHAFT BEARINGS, GEARS AND GEARING BALL OR ROLLER SCREWS, GEAR BOXES AND OTHER SPEED CHANGERS, INCLUDING TORQUE CONVERTERS; FLY WHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS, CLUTCHES AND SHAFT COUPLINGS (INCLUDING UNIVERSAL JOINTS).

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848350, FLYWHEELS AND PULLEYS INCLUDING PULLEY BLOCKS.

CN CODE 84835080, OTHER THAN OF CAST IRON OR CAST STEEL. TARIC CODE 8483508090, OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCOARDANCE WITH: HSEN NOTE 6 TO 8483

BTI Reference:
GB503414101.
Start date of validity:
.
End date of validity:
2020-03-02.

National keywords: OF ALUMINIUM SAFETY EQUIPMENT

A TRIPLE ATTACHMENT PULLEY WITH A SMALL 3…

of aluminium

A TRIPLE ATTACHMENT PULLEY WITH A SMALL 3 HOLE RIGGNG PLATE WHICH ALLOW IT TO BE GUIDED OR CONTROLLED WITHOUT ADDING ANY COMPLICATION TO THE SYSTEM.

THE EDGES ARE ROPE AND TEXTILE FRIENDLY WHICH ALLOWS MAXIMUM VERSATILITY. PRE-LUBRICATED OILITE BUSHING MEANS MINIMAL EFFICIENCY LOSSES AND MAINTENANCE.

MADE FROM FORGED ALUMINIUM. AVAILABLE IN BLACK, OLIVE AND SAND.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING: GENERAL INTERPRETATIVE RULES (GIR) GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8483, TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS AND CRANK SHAFTS) AND CRANKS, BEARING HOUSINGS AND PLAIN SHAFT BEARINGS, GEARS AND GEARING BALL OR ROLLER SCREWS, GEAR BOXES AND OTHER SPEED CHANGERS, INCLUDING TORQUE CONVERTERS; FLY WHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS, CLUTCHES AND SHAFT COUPLINGS (INCLUDING UNIVERSAL JOINTS).

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848350, FLYWHEELS AND PULLEYS INCLUDING PULLEY BLOCKS.

CN CODE 84835080, OTHER THAN OF CAST IRON OR CAST STEEL. TARIC CODE 8483508090, OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCOARDANCE WITH: HSENS

BTI Reference:
GB502026411.
Start date of validity:
.
End date of validity:
2020-09-02.

National keywords: OF ALUMINIUM

PARTS FOR AN OVERHEAD TROLLEY USED IN A WAREHOUSE…

PARTS FOR AN OVERHEAD TROLLEY USED IN A WAREHOUSE CONSISTING OF A BEARING PULLEY WHEEL CONTAINING BALL BEARINGS DESIGNED TO BE LOCATED IN THE TOP PRESSING IT ENABLES THE TROLLEY TO RUN FREELY AND EASILY ALONG THE OVERHEAD TRACK. MADE OF STEEL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING: GENERAL INTERPRETATIVE RULES (GIR) GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8483, TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS AND CRANK SHAFTS) AND CRANKS, BEARING HOUSINGS AND PLAIN SHAFT BEARINGS, GEARS AND GEARING BALL OR ROLLER SCREWS, GEAR BOXES AND OTHER SPEED CHANGERS, INCLUDING TORQUE CONVERTERS; FLY WHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS, CLUTCHES AND SHAFT COUPLINGS (INCLUDING UNIVERSAL JOINTS).

GIR 3(C) HAS BEEN USED AS IT IS CONSIDERED THERE IS NO ESSENTIAL CHARACTER AND THERFORE HAS BEEN CLASSIFIED LAST IN NUMERICAL ORDER WITHIN THE TARIFF.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848350, FLYWHEELS AND PULLEYS INCLUDING PULLEY BLOCKS.

CN CODE 84835080, OTHER THAN OF CASE IRON OR CAST STEEL. TARIC CODE 8483508090, OTHER THAN FOR USE IN CIVIL AIRCRAFT.

ALSO CLASSIFIED IN ACCOARDANCE WITH: GENERAL SECTION: NOTE 2(A) TO SECTION XVI.

BTI Reference:
GB120402245.
Start date of validity:
.
End date of validity:
2017-03-01.

National keywords: OF STEEL BALL BEARINGS

MANUAL BELT TENSIONER BEARINGS. USED TO CREATE…

MANUAL BELT TENSIONER BEARINGS. USED TO CREATE PRESSURE AND THUS TENSION A BELT DRIVE SYSTEM. SET MANUALLY ON MOUNTING AND THEN CAN BE ADJUSTED TO MAINTIAN PRESSURE LATER.

THE BELT TENSIONER IS CONSTRUCTED BY COMBINING TWO OR MORE COMPONENTS - 1. BEARING ROLLING ELEMENT, ISO 6200 SERIES SINGLE ROW DEEP GROOVE RADIAL BALL BEARING OR MODIFIED VERSION OF SUCH. 2.

TENSIONER ELEMENT, RADIAL BALL BEARING IS MODIFIED TO BECOME INTEGRATED WITH MOUNTING BRACKET OR COIL SPRING DEVICE TO CREATE INTERGRAL TENSIONER BEARING.

ONCE COMBINED THE PRODUCT BECOMES A TENSIONER BEARING AND THE ELEMENTS CANNOT BE NON DESTRUCTIVELY SEPARATED.

Classification justification: CLASSIFICATION IS ACCORDING TO GIRS 1 AND 6.CN 84835080-FLYWHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS-OTHER THAN OF CAST IRON OR CAST STEEL-OTHER THAN FOR USE IN CIVIL AIRCRAFT.TERMS OF HEADING 8483-INCLUDING FLYWHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS.TERMS OF SUBHEADING 848350-FLYWHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS.

HSEN (G) TO 8483.

BTI Reference:
GB500683475.
Start date of validity:
.
End date of validity:
2015-10-05.

National keywords: OF METAL

AUTOMATIC BELT TENSIONER BEARINGS. USED TO…

AUTOMATIC BELT TENSIONER BEARINGS. USED TO CREATE PRESSURE AND THUS TENSION A BELT DRIVE SYSTEM.

USES COILED SPRING TECHNOLOGY TO APPLY PRESSURE. THE BELT TENSIONER IS CONSTRUCTED BY COMBINING TWO OR MORE COMPONENTS - 1.

BEARING ROLLING ELEMENT, ISO 6200 SERIES SINGLE ROW DEEP GROOVE RADIAL BALL BEARING OR MODIFIED VERSION OF SUCH. 2.

TENSIONER ELEMENT, RADIAL BALL BEARING IS MODIFIED TO BECOME INTEGRATED WITH MOUNTING BRACKET OR COIL SPRING DEVICE TO CREATE INTERGRAL TENSIONER BEARING.

ONCE COMBINED THE PRODUCT BECOMES A TENSIONER BEARING AND THE ELEMENTS CANNOT BE NON DESTRUCTIVELY SEPARATED.

BTI Reference:
GB500683377.
Start date of validity:
.
End date of validity:
2015-10-05.

National keywords: OF METAL

TENSIONER ASSEMBLY. THE PART IS IMPORTED…

of metal

TENSIONER ASSEMBLY. THE PART IS IMPORTED FOR THE INDUSTRIAL ASSEMBLY OF MOTOR VEHICLES . THE PART IS MADE FROM STEEL AND ALUMINIUM.

THE PART COMPRISES A WHEEL WITH A GROOVED CIRCUMFERENCE (PULLEY) AND A RATCHET TO THE INTERIOR OF THE WHEEL.

THE WHEEL IS AFFIXED TO A BRACKET INTENDED FOR MOUNTING THE PART WITHIN THE VEHICLE, BUT RETAINS FREE ROTATIONAL MOVEMENT.

IN ITS ASSEMBLED STATE WITHIN THE ENGINE, A FAN BELT OR OTHER SUCH BAND PASSES AROUND THE RIM OF THE PULLEY THEREBY PREVENTING SLIPPAGE OF THE FAN BELT.

THE PART IS FOR USE IN A COMPRESSION IGNITION (DIESEL) ENGINE OF A CYLINDER CAPACITY NOT EXCEEDING 2,500CM

Classification justification: CLASSIFICATION IS DETERMINED ACCORDING TO GIRS 1 AND 6 OF THE COMBINED NOMENCLATURE. CN 84835080 AS OTHER FLYWHEELS AND PULLEYS, INCLUDING PULLEY BLOCKS

BTI Reference:
GB117912376.
Start date of validity:
.
End date of validity:
2014-10-16.

National keywords: OF METAL

DE- COUPLING PULLEY. A CLUTCH AND/OR VIBRATION…

DE- COUPLING PULLEY. A CLUTCH AND/OR VIBRATION DE -COUPLING PULLEY WHICH IS FITTED TO A 12 VOLT OR 24VOLT AUTOMOTIVE ALTERNATOR/GENERATOR. THE PULLEY IS MADE FROM TURNED STEEL WITH GROOVING AROUND THE TOP PART OF THE BARREL. THE PLAIN PART OF THE BARREL MAY BE BETWEEN 40MM TO 100MM LONG.

Classification justification: THE CLASSIFICATION IS DETERMINED ACCORDING TO GIRS 1 AND 6 . CN CODE 84835080 OTHER.

BTI Reference:
GB117555469.
Start date of validity:
.
End date of validity:
2014-07-01.

National keywords: OF STEEL FOR VEHICLES DRIVE MECHANISMS GROOVED

SPINDLE PULLEY, OF ALUMINIUM, WITH A DIAMETER…

SPINDLE PULLEY, OF ALUMINIUM, WITH A DIAMETER OF 2" APPROX. THIS IS PART OF MACHINE A THAT POLISHES CONTACT LENS.

Classification justification: GIRS 1 AND 6, TEXT TO 8483

BTI Reference:
IE04NT-14-1301-3A1.
Start date of validity:
.
End date of validity:
2012-02-19.

National keywords: OF ALUMINIUM

PULLEYS, MACHINED FROM ALUMINIUM OR STAINLESS…

PULLEYS, MACHINED FROM ALUMINIUM OR STAINLESS STEEL

Classification justification: CLASSIFICATION IS DETERMINED IN ACCORDANCE WITH THE PROVISIONS OF GENERAL INTERPRETATIVE RULES 1 AND 6 OF THE COMBINED NOMENCLATURE AND THE TEXT OF HEADING 8483 AND SUB HEADINGS 848350 AND 8483508090

BTI Reference:
GB500137705.
Start date of validity:
.
End date of validity:
2012-01-24.

National keywords: ALUMINIUM

PULLEY BLOCKS, DIE CAST AND MACHINED FROM…

PULLEY BLOCKS, DIE CAST AND MACHINED FROM ALUMINIUM INGOT AND BAR AND THEN ASSEMBLED. USED FOR RAISING AND LOWERING HEAVY OBJECTS.

Classification justification: CLASSIFICATION IS DETERMINED IN ACCORDANCE WITH THE PROVISIONS OF GENERAL INTERPRETATIVE RULES 1 AND 6 OF THE COMBINED NOMENCLATURE AND THE TEXT OF HEADING 8483 AND SUB HEADINGS 848350 AND 8483508090

BTI Reference:
GB500137607.
Start date of validity:
.
End date of validity:
2012-01-24.