Other / Automatic regulating or controlling instruments and apparatus.

A VEHICLE DYNAMIC CONTROL . IT IS A DRIVER…

A VEHICLE DYNAMIC CONTROL . IT IS A DRIVER / VEHICLE AID TO CONTROL AND ASSIST THE DRIVER TO SAFELY CONTROL THE VEHICLE IN A STABLE AND OPTIMISED CONDITION.

IT MONITORS DRIVER INPUT AND CONDITIONS EFFECTING THE VEHICLE BY MEANS OF ELECTRICAL CIRCUITS AND SENSORS, MAKING ADJUSTMENTS AND APPLYING THE BRAKES DURING MANOEUVRES THAT ENDANGER THE SAFETY OF THE DRIVER AND VEHICLE.

IT MANAGES STABILITY BY CONTROLLING BRAKE PRESSURE AND TORQUES FROM ITS POWER SOURCE BY DETECTING YAW RATE ACCELERATION, STEERING ANGLE AND WHEEL SPEED.THE CONTROL UNIT DETERMINES THE VEHICLES CONDITION BY SENSING THE OUTPUT FROM THE SENSOR SIGNAL.

AN AMOUNT OF CAREFULLY CALCULATED BRAKE PRESSURE IS AUTOMATICALLY APPLIED TO INDIVIDUAL WHEELS TO CORRECT THE VEHICLES BEHAVOIUR FROM AN OVERSTEER OR UNDERSTEER SITUATION AND ALSO MODERATES THE BRAKE PRESSURE TO PREVENT WHEEL SKIDDING AND THE TORQUE FROM THE POWER SOURCE TO RECOVER THE LOSS OF TRACTION.

COMPRISES OF VALVES, CIRCUIT BOARD, AND PART OF THE VEHICLES BRAKE FLUID.IT IS MADE FROM STEELS AND ALUMINIUM AND ELECTRICAL COMPONENTS.

IT HAS THREE BASIC FUNCTIONS, ABS PREVENTING THE WHEEL LOCK AND UNCONTROLLED SKIDDING, TCS OPTIMISE GRIP AND STABILITY DURING ACCELERATION, VDC PREVENTING UNSTABLE BEHAVIOUR AND LOSS OF STEERING CONTROL.

ADDITIONAL FUNCTIONS, HSA PREVENTING ROLL BACK IN THE CASE OF HILL STARTS., HDC PREVENTING UNSTABLE BEHAVIOUR BY WHEEL LOCK OR INSUFFICIENT ENGINE - DRAG IN CASE OF DOWN HILL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 FOR AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL- 903289 FOR OTHER INSTRUMENTS AND APPARATUS OTHER THAN HYDRAULIC OR PNEUMATIC.

TARIC CODE 90328900 90 FOR OTHER THAN DIGITAL VALUE CONTROLLER FOR CONTROLLING LIQUIDS OR GASES.

SECTION XVI. IN ACCORDANCE WITH NOTE 7 (b) TO CHAPTER 90 ADDITIONAL NOTE 1 TO CHAPTER 90. HSEN NOTES TO 9032 REFERS ELECTRONIC CONTROL UNITS THAT OPERATE AUTOMATICALLY, PERFORMING CONTROL FUNCTIONS BY MEANS OF PRE-SET PARAMETERS, ARE CONSIDERED TO BE AUTOMATIC CONTROL APPARATUS OF HEADING 9032.

BTI Reference:
GB503427577.
Start date of validity:
.
End date of validity:
2020-03-19.

National keywords: ELECTRONIC FOR MOTOR VEHICLES MACHINE PARTS FOR VEHICLES CONTROLLERS SAFETY EQUIPMENT

IGBT GATE DRIVER ASSEMBLY PN 51020195 IS…

IGBT GATE DRIVER ASSEMBLY PN 51020195 IS PART OF STARTER GENERATOR CONTROL UNIT THAT CONTROLS THE OPERATION OF THE STARTER GENERATOR SYSTEM. FOR USE IN AIRCRAFT.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 OTHER THAN HYDRAULIC OR PNEUMATIC.

TARIC CODE - 9032890090 - OTHER THAN ELSEWHERE SPECIFIED WITHIN THIS HEADING. ALSO CLASSIFIED IN ACCORDANCE WITH:- NOTE 7 (b) TO CHAPTER 90.

HSEN NOTE (3) TO HEADING 9032

BTI Reference:
GB503276766.
Start date of validity:
.
End date of validity:
2019-10-26.

National keywords: ASSEMBLIES CONTROLLERS FOR AIRCRAFT ELECTRIC MOTORS AND GENERATORS

A PLASTIC FLOAT SWITCH.FOR SENSING WATER…

A PLASTIC FLOAT SWITCH.FOR SENSING WATER LEVELS. IT IS DESIGNED TO BE MOUNTED THROUGH THE WALL OF A TANK. THE SWITCH CAN BE FITTED TO ACHIEVE EITHER MAKE ON RISE (N/O) OR MAKE ON FALL (N/C) ACTION BY SIMPLY ROTATING THROUGH 180 DEGREES

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 OTHER INSTRUMENTS AND APPARATUS TARIC NUMBER 9032890090 OTHER THAN HYDRAULIC OR PNEUMATIC ALSO CLASSIFIED IN ACCORDANCE WITH: HSENS CHAPTER NOTES 9032 (B)

BTI Reference:
GB501935860.
Start date of validity:
.
End date of validity:
2020-06-30.

National keywords: OF PLASTIC

12 AMP SINGLE PHASE AIR CONDITIONING CONTROLLER.…

12 AMP SINGLE PHASE AIR CONDITIONING CONTROLLER. ITS SENSOR-DRIVEN SOFTWARE ALGORITHMS ARE DESIGNED TO DETECT THERMODYNAMIC SATURATION AND TO OPTIMIZE THE COMPRESSOR IN THE AIR CONDITIONING UNIT ACCORDINGLY.

WHEN OVER CAPACITY IS DETECTED, THE CONTROLLER SWITCHES THE COMPRESSOR OFF AND AVOIDS INEFFICIENT OVERCOOLING.

THE DEVICE SWITCHES INTO "SAVER MODE", THE FAN KEEPS RUNNING AND THE SYSTEM MAKES MAXIMUM USE OF THE STORED COOLING ENERGY IN THE HEAT EXCHANGER.

ONCE THE STORED ENERGY IS USED UP, THE COMPRESSOR CAN WORK EFFICIENTLY AS PART OF THE COOLING CYCLE.

THIS RESULTS IN SIGNIFICANT ENERGY SAVINGS WITHOUT COMPROMISING COOLING COMFORT.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:_ GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 OTHER THAN HYDRAULIC OR PNEUMATIC TARIC CODE 9032890090 OTHER THAN DIGITAL VALUE CONTROLLER FOR CONTROLLING LIQUIDS AND GASES ALSO CLASSIFIED IN ACCORDANCE WITH:- CHAPER 90 NOTE 7(a) HARMONISED SYSTEM EXPLANATORY NOTE 9032 (I)

BTI Reference:
GB123705594.
Start date of validity:
.
End date of validity:
2020-03-04.

National keywords: PRINTED CIRCUITS FOR INCORPORATION IN OTHER GOODS CONTROLLERS

A DC VARIABLE SPEED DRIVE. DESIGNED FOR THE…

A DC VARIABLE SPEED DRIVE. DESIGNED FOR THE SPEED CONTROL OF SHUNTWOUND OR PERMANENT MAGNET MOTORS. IT INCORPORATES AN INTERNAL FIELD CONTROLLER AND UNIVERSAL SPEED FEEDBACK INPUTS. POWER RATING 0.55KW. A COMPACT DESIGN. CAN BE USED IN SPEED OR CURRENT CONTROL MODES.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 - AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 - OTHER THAN THERMOSTATS; OTHER THAN MANOSTATS; OTHER INSTRUMENTS AND APPARATUS; OTHER THAN HYDRAULIC OR PNEUMATIC; OTHER.

TARIC CODE 9032890090 - OTHER THAN ELSEWHERE SPECIFIED. ALSO CLASSIFIED IN ACCORDANCE WITH: NOTE 7 (b) TO CHAPTER 90.

THE HSEN OF HEADING 9032 NOTE (II) REFERS.

BTI Reference:
GB122968263.
Start date of validity:
.
End date of validity:
2019-06-26.

National keywords: FOR AUTOMATIC CONTROL

AN AC VARIABLE SPEED DRIVE. DESIGNED FOR…

AN AC VARIABLE SPEED DRIVE. DESIGNED FOR THE CONTROL AND SPEED VARIATION OF 3 PHASE INDUCTION ELECTRIC MOTORS.

IT HAS A HIGH SPEED DIGITAL SIGNAL PROCESSOR. ELECTRONICS WITH SMD COMPONENTS. SINUSOIDAL PWM MODULATION, SPACE VECTOR MODULATION.

IGBT MODULES. HAS AN INTERFACE WITH MEMBRANE KEYPAD. WITH A POWER RATING UP TO 2.2KW.

BTI Reference:
GB122968165.
Start date of validity:
.
End date of validity:
2019-06-26.

National keywords: ELECTRONIC FOR AUTOMATIC CONTROL VOLTAGE REGULATORS

TORQUE SENSOR. RELAYS INFORMATION TO CONTROL…

TORQUE SENSOR. RELAYS INFORMATION TO CONTROL UNIT FOR POWER ASSISTANCE. A TORQUE SENSOR, IS A TRANSDUCER THAT CONVERTS A TORSIONAL MECHANICAL INPUT INTO AN ELECTRICAL OUTPUT SIGNAL.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 - AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 - OTHER THAN THERMOSTATS; OTHER THAN MANOSTATS; OTHER INSTRUMENTS AND APPARATUS; OTHER THAN HYDRAULIC OR PNEUMATIC; OTHER.

TARIC CODE 9032890090 - OTHER THAN ELSEWHERE SPECIFIED. ALSO CLASSIFIED IN ACCORDANCE WITH: THE HSEN TO CHAPTER 9032

BTI Reference:
GB122955962.
Start date of validity:
.
End date of validity:
2019-06-17.

National keywords: ELECTRONIC SENSORS FOR VEHICLES

SURFACE ELETRICAL CONTROL PANEL (SECP). THIS…

SURFACE ELETRICAL CONTROL PANEL (SECP). THIS PRODUCT IS PART OF SUBSEA PRODUCT LINE AND COMPRISES OF A PRESSURISED LAB CABIN.

IT IS PRIMARILY USED TO CONTROL ELECTRONIC SENSORS IN VARIOUS TOOLS IN THE PRODUCT LINE. THE SECP COMPRISES OF A CABIN WHICH CONTAINS POWER SUPPLIES, TRANSFORMERS, PRESSURE GAUGES, AN AC UNIT, PRINTED CIRCUIT BOARDS, ELECTRICAL INTERFACES, A WORK STATION AND AN ELECTRONIC CONTROL PANEL.

THE SECP IS POWERED BY A RIG POWER SUPPLY ON A 3 PHASE 440 VOLTS, 50 Hz RIG SUPPLY. HOWEVER THERE ARE TRANSFORMERS THAT CAN BE POWERED BY BATTERY TO ENSURE THERE IS UNINTERRUPTED POWER SUPPLY.

THE SECP IS USED AS A SAFETY CONTROL IN THE EVENT OF PRODUCT LINE FAILURE IN THE PRODUCT LINE AND AUTOMATICALLY SHUTS DOWN OR ISOLATES AREAS IN THE SUBSEA TOOLS IN AN EMERGENCY.

IT ALSO CONTROLS THE FUNCTIONALITY OF ELECTRICAL COMPONENTS IN TOOLS CONNECTED TO THE TOOL STRING IN THE SUBSEA.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING - 9032 - AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL - 903289 - OTHER THAN THERMOSTATS; OTHER THAN MANOSTATS; OTHER INSTRUMENTS AND APPARATUS; OTHER THAN HYDRAULIC OR PNEUMATIC; OTHER.

TARIC CODE - 9032890090 - OTHER THAN ELSEWHERE SPECIFIED. ALSO CLASSIFIED IN ACCORDANCE WITH:- NOTE 3 TO CHAPTER 90 NOTE 7 (b) TO CHAPTER 90.

THE HSEN OF HEADING 9032 NOTE (II) REFERS.

BTI Reference:
GB122953380.
Start date of validity:
.
End date of validity:
2019-06-17.

National keywords: ELECTRONIC FOR ELECTRICITY FOR AUTOMATIC CONTROL

UNIDRIVE M100. A VARIABLE SPEED DRIVE TO…

UNIDRIVE M100. A VARIABLE SPEED DRIVE TO CONTROL THE SPEED AND TORQUE OF AC INDUSTRIAL MOTORS BY VARYING THE MOTOR INPUT FREQUENCY AND VOLTAGE.

IT INCORPORATES A MICROCONTROLLER BASED CONTROL OF POWER SEMICONDUCTOR SWITCHES, INCLUDING ONBOARD PROGRAMMABLE LOGIC CONTROLLER CAPABILITY ON MOST PRODUCT VARIANTS.

IT INCLUDES A NUMBER OF PRINTED CIRCUIT BOARD ASSEMBLIES WITH VARIOUS MECHANICAL INTERCONNECTIONS, HOUSED IN EITHER PLASTIC OR PLASTIC / METALLIC ENCLOSURES.

THE PRINTED CIRCUIT BOARDS CONTAIN BOTH ACTIVE AND PASSIVE ELEMENTS.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 - AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 - OTHER THAN THERMOSTATS; OTHER THAN MANOSTATS; OTHER INSTRUMENTS AND APPARATUS; OTHER THAN HYDRAULIC OR PNEUMATIC; OTHER.

TARIC CODE 9032890090 - OTHER THAN ELSEWHERE SPECIFIED. ALSO CLASSIFIED IN ACCORDANCE WITH: NOTE 7 (b) TO CHAPTER 90.

THE HSEN OF HEADING 9032 NOTE (II) REFERS

BTI Reference:
GB501504308.
Start date of validity:
.
End date of validity:
2019-04-11.

National keywords: CONVERTERS RECTIFIERS FOR AUTOMATIC CONTROL VOLTAGE REGULATORS

UNIDRIVE M100. A VARIABLE SPEED DRIVE TO…

UNIDRIVE M100. A VARIABLE SPEED DRIVE TO CONTROL THE SPEED AND TORQUE OF AC INDUSTRIAL MOTORS BY VARYING THE MOTOR INPUT FREQUENCY AND VOLTAGE.

IT INCORPORATES A MICROCONTROLLER BASED CONTROL OF POWER SEMICONDUCTOR SWITCHES, INCLUDING ONBOARD PROGRAMMABLE LOGIC CONTROLLER CAPABILITY ON MOST PRODUCT VARIANTS.

IT INCLUDES A NUMBER OF PRINTED CIRCUIT BOARD ASSEMBLIES WITH VARIOUS MECHANICAL INTERCONNECTIONS, HOUSED IN EITHER PLASTIC OR PLASTIC / METALLIC ENCLOSURES.

THE PRINTED CIRCUIT BOARDS CONTAIN BOTH ACTIVE AND PASSIVE ELEMENTS.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 9032 - AUTOMATIC REGULATING OR CONTROLLING INSTRUMENTS AND APPARATUS.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 903289 - OTHER THAN THERMOSTATS; OTHER THAN MANOSTATS; OTHER INSTRUMENTS AND APPARATUS; OTHER THAN HYDRAULIC OR PNEUMATIC; OTHER.

TARIC CODE 9032890090 - OTHER THAN ELSEWHERE SPECIFIED. ALSO CLASSIFIED IN ACCORDANCE WITH: NOTE 7 (b) TO CHAPTER 90.

THE HSEN OF HEADING 9032 NOTE (II) REFERS.

BTI Reference:
GB501456482.
Start date of validity:
.
End date of validity:
2019-04-11.

National keywords: CONVERTERS RECTIFIERS FOR AUTOMATIC CONTROL VOLTAGE REGULATORS