BEARING HOUSINGS.

LOŽISKOVÁ POUZDRA 8 LAGERGEHÄUSE 64 CAJA DE COJINETES 3 PALIER À ROULEMENT INCORPORÉ 7 CSAPÁGYHÁZ 2 SUPPORTI CON CUSCINETTI 7 OBUDOWY ŁOŻYSK 2 LAGĂRE CU RULMENŢI ÎNCORPORAŢI 1 LOŽISKOVÉ PUZDRÁ 6 LAGERHUS 2

THIS PART IS CALLED AN INNER SHAFT. THIS…

THIS PART IS CALLED AN INNER SHAFT. THIS FORGED PART IS MADE FROM S55C LS CARBON STEEL. IT IS OF CIRCULAR CROSS SECTION.

THESE PARTS ULTIMATELY END UP BEING ASSEMBLED IN TO A 3RD GENERATION ANGULAR CONTACT FLANGED BEARING BUT MANY PROCESSES TO THESE PARTS ARE NEEDED TO MAKE THEM SUITABLE FOR ASSEMBLY INTO A BEARING.

THESE PARTS ARE SUBJECT TO THE FOLLOWING IN HOUSE PROCESSES BEFORE BEING USED AS PART OF A BEARING: TURNING, INDUCTION HEAT TREATMENT, TEMPERING, DRILLING, TAPPING, GRINDING INCLUDING THAT OF RACEWAY THEY CAN ONLY BECOME PART OF A BEARING AFTER THESE MANY MACHINING PROCESSES WHICH ADD THE RACEWAY AND DEFINE THEM AS A BEARING PART EXCLUSIVELY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL BEARING HOUSINGS FORGED

OIL DEFLECTOR USED TO DIRECT OIL FLOW THROUGH…

OIL DEFLECTOR USED TO DIRECT OIL FLOW THROUGH A BEARING SYSTEM AT THE TURBINE END OF THE ROTOR GROUP.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL SLEEVES BEARING HOUSINGS

A BEARING HOUSING. A FINISHED MACHINE COMPONENT…

A BEARING HOUSING. A FINISHED MACHINE COMPONENT DESIGNED TO CARRY THE JOURNAL BEARINGS TO SUPPORT AND RESTRAIN THE ROTOR GROUP (SHAFT AND WHEEL ASSEMBLY AND COMPRESSOR WHEEL).

THE BEARING HOUSING IS CYLINDRICAL, AND IS MADE OF PRECISION-CAST GREY IRON COMPLYING WITH STANDARD DIN EN1561.

THE BEARING HOUSING HAS AN OIL CHAMBER AND IS WITHOUT THE ACTUAL BEARINGS. THE DIAMETER OF THE HOUSING IS 152 MM, AND THE HEIGHT IS 96 MM.

THE HOUSING IS WITHOUT WATER CHAMBERS AND CONNECTORS. THE BEARING HOUSING IS THE CENTRAL PART OF A TURBOCHARGER ASSEMBLY THAT HAS BEEN DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINE RUNNING ON DIESEL, PETROL OR GAS FUEL.

TURBOCHARGER APPLICATIONS INCLUDE, BUT ARE NOT LIMITED TO, ON AND OFF-ROAD COMMERCIAL VEHICLES, MARITIME ENGINES, INDUSTRIAL COMPRESSORS AND GENERATOR SETS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL BEARING HOUSINGS OF CAST IRON

BEARING HOUSING CASTING, IDENTIFIABLE AS…

BEARING HOUSING CASTING, IDENTIFIABLE AS A BEARING HOUSING. THE HOUSING IS MADE OF PRECISION-CAST GREY IRON COMPLYING WITH STANDARD DIN EN1561.

THE BEARING HOUSING IS CYLINDRICAL AND HAS AN OIL CHAMBER. THE BEARING HOUSING IS WITHOUT ACTUAL BEARINGS.

THE DIAMETER IS 60MM OR MORE, BUT IS NOT MORE THAN 180MM. THE HEIGHT OF THE HOUSING IS 60 MM OR MORE, BUT IS NOT MORE THAN 120MM.

THE HOUSING CONTAINS WATER CHAMBERS AND CONNECTORS. THIS SPECIFIC TYPE IS FOR WATER-COOLED APPLICATIONS.

THE BEARING HOUSING CASTING IS THE RAW MATERIAL FROM WHICH THE BEARING HOUSING ASSEMBLY IS MACHINED AND IS PART OF A TURBOCHARGER ASSEMBLY THAT HAS BEEN DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINE RUNNING ON DIESEL, PETROL OR GAS FUEL.

TURBOCHARGER APPLICATIONS INCLUDE, BUT ARE NOT LIMITED TO, ON AND OFF-ROAD COMMERCIAL VEHICLES, MARITIME ENGINES, INDUSTRIAL COMPRESSORS AND GENERATOR SETS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL BEARING HOUSINGS OF CAST IRON