BRAKES.

BRZDY 56 BREMSVORRICHTUNG 44 ΦΡΕΝΑ 1 FRENO 5 JARRU 1 FREIN 86 FÉKEK 5 FRENI 1 REMMEN 34 HAMULCE 48 TRAVAO 4 FRÂNE 1 BRZDY 28 BROMS 94

THIS PRODUCT IS A SENSOR CAP WHICH IS USED…

THIS PRODUCT IS A SENSOR CAP WHICH IS USED IN A HUB UNIT BEARINGS SYSTEM. ONE SIDE OF THE HUB UNIT IS ATTACHED TO THE AXLE, THE OTHER TO THE WHEEL.

THE SENSOR CAP IS FITTED TO THE TOP OF THE BEARINGS AND SENDS MEASUREMENTS TO THE ABS BRAKING SYSTEM ON VEHICLES.

THE ABS SENSOR CAP IS AN ELECTROMAGNETIC SENSOR WHICH DETECTS THE SPEED OF ROTATION OF A MULTI-POLED MAGNETIC RING (WITHIN THE HUB UNIT BEARING).

THE AMPLITUDE OF THE MAGNETIC WAVEFORM FROM THIS RING THEN FEEDS THIS INFORMATION TO THE VEHICLES ELECTRONIC CONTROL SYSTEM TO ENABLE THE FUNCTION OF THE ANTI LOCK BRAKING SYSTEM.

THE SENSOR IS MADE FROM PLASTIC AND HAVE CONNECTORS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT SENSORS FOR VEHICLES BRAKES

A PART OF AN AEROPLANE. THE PRODUCT IS A…

A PART OF AN AEROPLANE. THE PRODUCT IS A WING TIP BRAKE WHICH IS USED ON AN AIRBUS. THE WING TIP BRAKE IS A PRESSURE-OFF BRAKE WHICH IS OPERATED ELECTRICALLY.

THE UNIT WILL STOP THE SYSTEM WHEN ITS OPERATION IS NOT CONTROLLED OR THE OPERATION BETWEEN THE WINGS FLIGHT SURFACES IS NOT SYMMETRICAL.

THE PRIMARY COMPONENTS OF THE UNIT ARE: A BRAKE HOUSING ASSEMBLY, A DRIVE SHAFT, TWO SOLENOID VALVE ASSEMBLIES (LINE REPLACEMENT UNITS) AND A PROXIMITY SWITCH (LINE REPLACEMENT UNIT)

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ASSEMBLIES BRAKES WINGS AEROPLANES AIRCRAFT PARTS

GUN BRAKE SYSTEM (GBS) TO BE USED WITH A…

GUN BRAKE SYSTEM (GBS) TO BE USED WITH A DOWNHOLE TRACTOR IN OIL AND GAS INDUSTRIES. THE GUN BRAKE SYSTEM IS DESIGNED TO PREVENT ANY MOVEMENT OF THE PERFORATING STRING DURING PERFORATING OPERATIONS.

THIS PREVENTS THE GUN FROM BEING BLOWN UPHOLE DURING UNDERBALANCED PERFORATING OPERATIONS, OR PROTECTS THE WEAKPOINT WHEN LARGER, HEAVIER GUNS ARE BEING FIRED.

THIS CAN PREVENT BREAKAGE AND/OR DAMAGE TO THE CABLE, POTENTIALLY RESULTING IN EXPENSIVE AND TIME-CONSUMING FISHING OPERATIONS.

THE GUN BRAKE SYSTEM ANCHORS THE GUN-STRING VIA THREE SETS OF SLIPS. THE TOOL IS RUN INTO THE WELLBORE WITH THE SLIPS RETRACTED, THEN ONCE ON DEPTH, THE TOOL IS MOTORED OPEN AND ANCHORED IN THE CASING.

DURING DETONATION, ANY SHOCK FROM THE GUN (UPWARDS OR DOWNWARDS) IS TRANSMITTED THROUGH THE SLIPS TO THE CASING, SO INCREASING THE ANCHORING FORCE.

THE TOOL CAN BE OPENED AND CLOSED AS MANY TIMES AS REQUIRED IN THE WELLBORE AND THE MODULAR NATURE OF THE GUARDIAN SYSTEM MEANS THAT IT CAN BE COMBINED WITH OTHER TOOLS, I.E.

AN ADDRESSABLE RELEASE TOOL (ART), A VOLTAGE PROTECTION MODULE (VPM) OR POWER SWIVEL JOINT (PSJ).

FISHING STRENGTH 30,000 LBS, FEEDTHRU CURRENT (MAX) 6A, PRESSURE (MAX) 15,000 PSI, BENDING LOAD 7,500 LBS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: GAS MACHINE PARTS TRACTORS OILS BRAKES FOR MINES

SECONDARY BRAKE SYSTEM CABLES. PRODUCT COMPRISES…

SECONDARY BRAKE SYSTEM CABLES. PRODUCT COMPRISES OF BOWDEN REMOTE CONTROL CABLES WITH PLASTIC CONNECTORS, THAT CONNECT THE PARK BRAKE LEVER TO THE SECONDARY BRAKE SYSTEM IN A MOTOR VEHICLE.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC NON-ELECTRIC CABLES FOR MOTOR VEHICLES MOTOR VEHICLE PARTS MECHANICAL BODIES LEVERS CONNECTORS BRAKES