CARBON.

UHLÍK 28 KOHLENSTOFF 199 ΑΝΘΡΑΚΑΣ 2 CARBONO 11 CARBONE 172 SZÉN 6 CARBONIO 18 ANGLIS 1 KOOLSTOF 41 WĘGIEL 5 CARBON 2 UHLÍK 20 OGLJIK 36 KOL 57

BLACK KNITTED POLYESTER SPRAYED WITH ACTIVATED…

BLACK KNITTED POLYESTER SPRAYED WITH ACTIVATED CARBON ON ONE SIDE AND THEN LAMINATED TO A GREY NON WOVEN WHICH PROTECTS THE CARBON SUBSTRATE.

THE CARBON IS THE ABSORBER OF THE ODOURS. THE ACTIVATED CARBON COATING CAN BE SEEN WITH THE NAKED EYE.

THE PRODUCT IS USED FOR ODOUR REMOVAL IN A RANGE OF APPLICATIONS SUCH AS CAR BOOT COVERS AND SUITS THE WEIGHT OF THE KNITTED POLYESTER IS 130 GM2.

THE WEIGHT OF THE NON-WOVEN IS 38 GM2. THE 2 FABRICS HAVE BEEN DYED PACKAGED ON ROLLS ON APPROX 701M, 1.47 M WIDE

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: POLYESTERS NONWOVENS CARBON KNITTED FABRICS LAMINATED TEXTILES

PARTS OF A VASCULAR SURGICAL DEVICE, THE…

carbon; nylon; surgical instruments; catheters

PARTS OF A VASCULAR SURGICAL DEVICE, THE DEVICES ARE DESIGNED TO DELIVER POLYESTER SUTURE(S) TO CLOSE FEMORAL ARTERY PUNCTURE SITES FOLLOWING CATHERISATION PROCEDURE.

BOTH PARTS FORM PART OF THE GUIDE ASSEMBLY AND ARE BONDED TOGETHER. THE SUTURE RUNS THROUGH THE BONDED PART.

THE DEVICES FORM PART OF THE DEPLOYMENT SYSTEM THAT WILL ALLOW A PHYSICIAN TO SUTURE A TEAR IN THE BODY.

THE MATERIAL COMPOSTIION OF BOTH PARTS ARE NYLON 6/6 WITH 40% CARBON FIBRE.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: CARBON NYLON SURGICAL INSTRUMENTS CATHETERS

A CARBON CLOTH PRE-IMPREGNATED WITH EPOXY…

A CARBON CLOTH PRE-IMPREGNATED WITH EPOXY RESIN. THE PREPREG IS BETWEEN 2 INTERLEAVES OF GREEN EMBOSSED AND BLUE EMBOSSED POLYETHYLENE. ROLLED ONTO A CARDBOARD TUBE IN 25 OR 50 M LENGTHS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: WOVEN CARBON AS SHEETS IMPREGNATED EPOXIDE RESINS

RESIN INPREGNATED CARBON/ POLYESTER FABRIC…

RESIN INPREGNATED CARBON/ POLYESTER FABRIC WITH PLASTIC BACKING. MATERIALS ARE USED AS A SURFACE PRE-TREATMENT OF COMPOSITE PARTS PRIOR TO STRUCTURAL BONDING. THE SURFACE PREPARATION IS OBTAINED BY PEELING OFF THE PEEL PLY WITHOUT ANY SUBSEQUENT OPERATION OF ABRASION.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: POLYESTERS OF PLASTIC CARBON IMPREGNATED EPOXIDE RESINS