COLD ROLLED #4.

VÁLCOVANÉ ZA STUDENA 22 KALTGEWALZT 80 ΑΠΟ ΕΛΑΣΗ ΣΕ ΨΥΧΡΗ ΚΑΤΑΣΤΑΣΗ 2 LAMINADO EN FRIO 5 KÜLMVALTSITUD 1 KYLMÄVALSSATTU 4 LAMINÉ À FROID 12 HIDEGEN HENGERELT 7 LAMINATO A FREDDO 59 ŠALTAI VALCUOTI 2 AUKSTI VELMĒTS 2 KOUD GEWALST 11 WALCOWANY NA ZIMNO 36 VALCOVANÝ ZA STUDENA 3 KALLVALSAD 9

WELDED TUBING OF STAINLESS STEEL WITH A CIRCULAR…

WELDED TUBING OF STAINLESS STEEL WITH A CIRCULAR CROSS SECTION. COLD ROLLED. AVAILABLE IN THE FOLLOWING DIAMETERS, ALL OF WHICH ARE LESS THAN 406.4 MM (16 INCHES) IN DIAMETER: 1 INCH (25.4 MM), 1.5 INCH (38.1 MM), 2 INCH (50.8 MM), 2.5 INCH (63.5 MM), 3 INCH (76.2 MM), 4 INCH (101.6 MM) AND 6 INCH (152.4 MM).

ALL SUPPLIED IN 20 FOOT (6.1 METRE) LENGTHS. NOT OF A TYPE USED FOR OIL OR GAS PIPELINES.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STAINLESS STEEL COLD ROLLED WELDED

A CHASSIS OF COLD ROLLED STEEL DESIGNED TO…

A CHASSIS OF COLD ROLLED STEEL DESIGNED TO FIT ONTO A POWER SUPPLY PASSIVE RECEIVER HUB. MEASURES APPROXIMATELY 123MM X 44MM X 2MM.

WITH A 90 DEGREE BEND AT ONE END TO ENABLE A FLUSH MOUNTING BETWEEN THE CHASSIS AND THE HUB.

THE CHASSIS COMES COMPLETE WITH TWO FRONT MOUNTING BRACKETS, FOUR 4-40 THREAD PAN HEAD RAIL SCREWS AND FOUR 10-24 THREAD REAR RACK SCREWS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL FRAMES MOUNTINGS, METAL COLD ROLLED

THERMAL BIMETAL COILS OF HOT ROLLED MULTI…

THERMAL BIMETAL COILS OF HOT ROLLED MULTI LAYER (MINIMUM 2, MAXIMUM 4) STEELS OF VARIOUS COMPOSITIONS NOT EXCEEDING 100MM WIDE.

THE HOT ROLLED COILS ARE THEN FURTHER WORKED BY COLD ROLLING TO ATTAIN THE CORRECT HARDNESS; ROLLER STRETCH LEVELLING TO ATTAIN THE CORRECT FLATNESS AND MAY BE SPLIT TO ATTAIN THE CORRECT WIDTH.

PLEASE NOTE THE MATERIALS ARE NOT CLAD TOGETHER BUT JOINED DURING THE ROLLING PROCESS AT AN ATOMIC LEVEL.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL COILS HOT ROLLED COLD ROLLED LAYERED

FLAT ROLLED STRIP OF STAINLESS STEEL IN COILS.…

FLAT ROLLED STRIP OF STAINLESS STEEL IN COILS. NOT FURTHER WORKED THAN COLD-ROLLED. RECTANGULAR IN CROSS SECTION. OF A WIDTH OF LESS THAN 600MM. OF A THICKNESS EXCEEDING 0.35MM BUT LESS THAN 3MM. CONTAINING BY WEIGHT 2.5 PERCENT OR MORE OF NICKEL. OILED TO PREVENT RUSTING.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STAINLESS STEEL STRIPS COLD ROLLED