CONTROL PADS.

KONTROLNÍ PODLOŽKY 1 KONTROLPANEL 1 BEDIENUNGSFELD 12 OHJAUSPANEELI 4 TABLEAU DE COMMANDE 77 VEZÉRLŐTÁBLA 7 QUADRI DI COMANDO 9 KONTROLES PULTIS 8 SCHAKELBORDEN 15 TABLICE STERUJĄCE 3 PAINEL DE COMANDO 6 TABLOU DE COMANDĂ 5 OVLÁDACIA DOSKA 12 KRMILNE KONZOLE 2 MANÖVERPANEL 14

A HUB CONTROLLER IS A HOME HEAT ENERGY INFORMATION…

A HUB CONTROLLER IS A HOME HEAT ENERGY INFORMATION DEVICE. THE HUB CONTROLLER CONSISTS OF AN ALUMINIUM, RUBBER AND PLASTIC CASING HOUSING, A TOUCH SCREEN DISPLAY CONNECTED TO A PRINTED CIRCUIT BOARD WITH A WIFI CHIP AND THERMOSTAT THAT ARE CONNECTED TO A SECOND PRINTED CIRCUIT BOARD WITH POWER SUPPLY UNIT AND RECHARGEABLE LITHIUM ION BATTERY.

THE HUB CONTROLLER CAN BE CONNECTED TO ANY ELECTRICAL INPUT OF BETWEEN 220V AND 240V. THE HUB CONTROLLER'S DIMENSIONS ARE 130MM WIDE, 88MM HIGH AND 33MM DEEP.

IT WEIGHS 320G. IT ALLOWS HOUSEHOLDS TO CONTROL ANY HOME HEATING/COOLING SYSTEM REMOTELY USING A SECURELY PAIRED MOBILE PHONE OR FROM THE HOME USING THE TOUCHSCREEN ON THE HUB CONTROLLER.

THE CONTROLLER IS SUPPLIED WITH A BASE PLATE, CHILD SAFETY TOOL, A SCREWDRIVER, 2 SCREWS AND A WASHER

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: REMOTE CONTROL TOUCH-SENSITIVE PROGRAMMABLE CONTROLLERS CONTROLLERS FOR HEATING CONTROL PADS REMOTE MONITORING UNITS

A CONTROL DISPLAY UNIT (CDU) THAT PROVIDES…

A CONTROL DISPLAY UNIT (CDU) THAT PROVIDES AN INTERFACE TO THE FLIGHT MANAGEMENT COMPUTER SYSTEM (FMCS) WHICH HOLDS THE NAVIGATION DATABASE.

THE FILGHT CREW USE THE CDU TO ENTER ROUTE AND PERFORMANCE DATA FOR THE FLIGHT. IT HAS THE ADDITIONAL CAPABILITY TO FUNCTION AS AN INDEPENDENT SOURCE OF NAVIGATION.

IN THIS MODE THE CDU PROVIDES LATERAL NAVIGATION FROM THE FMC. THIS ALLOWS THE CREW TO MODIFY THE FLIGHT PLAN IN FLIGHT WHEN REQUIRED.

THE INFORMATION IS SHOWN AS A DIGITAL DISPLAY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: COMPUTER ASSISTED CONTROL PADS

A TOUCHSCREEN TERMINAL USED TO PROVIDE CREW…

A TOUCHSCREEN TERMINAL USED TO PROVIDE CREW ACCESS TO CONFIGURATION AND MAINTENANCE CONTROL OF AN IN-FLIGHT ENTERTAINMENT SYSTEM (IFES).

THE TERMINAL PROVIDES CONTROL OF CABIN LIGHTING, CABIN TO VIDEO SOURCE MAPPING, BOARDING MUSIC, PRE-RECORDED ANNOUNCEMENT MACHINE, PASSENGER ADDRESS CABIN ZONE CONFIRGURATION AND DATA LOADING.

IT CAN ALSO BE USED TO INITIATE BUILT-IN TEST EQUIPMENT REQUESTS AND PREVIEW OF VIDEO/AUDIO PROGRAMS.

IT HAS A 12.1 IN XGA 1024 X 768 COLOUR LCD DISPLAY AND VARIOUS INTERFACES, INCLUDING ETHERNET, USB AND RS-232.

THE TERMINAL IS PROGRAMMABLE. IT IS FOR A VOLTAGE OF 115 (400Hz).

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TOUCH-SENSITIVE PROGRAMMABLE CONTROLLERS TERMINALS CONTROL BOARDS CONTROL PADS

A SPECIFICALLY SHAPED RUBBER KEYPAD THAT…

of rubber; scanners; control padsof rubber; scanners; control pads

A SPECIFICALLY SHAPED RUBBER KEYPAD THAT IS USED FOR THE OPERATION OF A FINGERPRINT SCANNER. THE KEYPAD PROVIDES THE INITIATION SIGNAL FOR THE DATA INPUT ENTRY ON THE FINGERPRINT SCANNER.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF RUBBER SCANNERS CONTROL PADS