ELECTRONIC.

ЕЛЕКТРОНЕН 5 ELEKTRONICKÉ 347 ELEKTRONISK 32 ELEKTRONISCH 5564 ΗΛΕΚΤΡΟΝΙΚΟΣ 11 ELECTRONICO 74 ELEKTROONILINE 2 SÄHKÖINEN 67 ÉLECTRONIQUE, ABSTRAIT 13 ELEKTRONIČKI 3 ELEKTRONIKUS 58 ELETTRONICO 71 ELEKTRONINIAI 1 ELEKTRONISKS 33 ELEKTRONISCH 560 ELEKTRONICZNY 185 ELECTRONICO 6 ELECTRONIC 12 ELEKTRONICKÝ 31 ELEKTRONSKI 44 ELEKTRONISK 77

A TRANSCRANIAL NERVE STIMULATOR IS CAPABLE…

A TRANSCRANIAL NERVE STIMULATOR IS CAPABLE OF SINGLE PULSE STIMULATION OF UP TO 0.5HZ. THE UNIT IS USED FOR CLINICAL DIANGOSTICS AND CORTICAL MAPPING IN RESEARCH STUDIES.

THE SYSTEM CAN BE UPGRADED BY CONNECTING TWO OF THE UNITS VIA A CONNECTING MODULE TO CREATE A PAIRED PULSED DELIVERY THROUGH A STIMULATING COIL.

THE SYSTEM IS COMPRISED OF A STIMULATING UNIT AND A USER INTERFACE CONTROLLER (AFFIXED TO FRONT OF THE UNIT) SYSTEM IS COMPRISED OF: 2X STIMULATING UNIT, USER INTERFACE CONTROLLER (AFFIXED TO FRONT OF UNIT), CONNECTING MODULE (AFFIXED TO 'PARENT' UNIT) SYSTEM IS MADE OF FOLLOWING MATERIALS: CNC MACHINED STEEL; INJECTION MOULDED PLASTIC, VULCANISED RUBBER, COPPER CABLE, 25 WAY RIBBON CABLE ASSEMBLY, TRANSFORMER ASSEMBLY, HIGH VOLTAGE CAPACITOR, MOTHERBOARD ASSEMBLY AND A DAUGHTERBOARD ASSEMBLY, PCBS, LEDS, SEMIKRON THYRISTOR, HEATSINK ASSEMBLY, ALSO, INCLUDED IS A 120MM CASE FAN, WITH PVC AIR TUBING.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC MEDICAL EQUIPMENT FOR MEDICAL USE

A BIPHASIC REPETITIVE TRANSCRANIAL NERVE…

A BIPHASIC REPETITIVE TRANSCRANIAL NERVE STIMULATOR FOR USE IN CLINICAL DIAGNOSTICS OF DEPRESSION AND RESEARCH PROTOCOLS.

STANDARD SYSTEM, A BIPHASIC SYSTEM CABLE OF STIMULATING FREQUENCY OF 50HZ FOR CORTICAL AND PERIPHERAL STIMULATION IS COMPRISED OF A STIMULATOR UNIT, SINGLE HV POWER SUPPLY UNIT, INTERACTIVE TOUCH SCREEN USER INTERFACE CONTROLLER (SECURED TO TOP OF SYSTEM) A BIPHASIC SYSTEM CABLE OF STIMULATING FREQUENCY OF 100HZ FOR CORTICAL AND PERIPHERAL STIMULATION AND THETA BURST COMPRISES OF A STIMULATOR UNIT, DUAL HV POWER SUPPLY UNIT, INTERACTIVE TOUCH SCREEN USER INTERFACE CONTROLLER (SECURED TO TOP OF SYSTEM) BIPHASIC SYSTEM CABLE OF STIMULATING FREQUENCY OF 100HZ FOR CORTICAL AND PERIPHERAL STIMULATION AND THETA BURST: COMPRISED OF STIMULATOR UNIT, DUAL HV POWER SUPPLY UNIT,SLAVE UNIT, INTERACTIVE TOUCH SCREEN USER INTERFACE CONTROLLER (SECURED TO TOP OF SYSTEM) SYSTEM IS MADE OF FOLLOWING MATERIALS: CNC MACHINED STEEL; INJECTION MOULDED PLASTIC, VULCANISED RUBBER, COPPER CABLE, 25 WAY RIBBON CABLE ASSEMBLY, TRANSFORMER ASSEMBLY, HIGH VOLTAGE CAPACITOR, MOTHERBOARD ASSEMBLY AND DAUGHTERBOARD ASSEMBLY, PCBS, LEDS, SEMIKRON THYRISTOR, HEATSINK ASSEMBLY.

ALSO, A 120MM CASE FAN, WITH PVC AIR TUBING, 13A FUSE, NYLON SPACERS, NYLON PILLAR MOUNTS, TFT INTERFACE CABLE, ALUMINIUM WISHBONE, PLASTIC SHIELDING GASKET, VGA LED TOUCHSCREEN, UI BEZEL ASSEMBLY, SILICON SPONGE, POLYMIDE KAPTON TAPE, UI CONTROLLER BOARD ASSEMBLY, AND A UI SWITCH BOARD ASSEMBLY.

THE SYSTEMS OUPUT SUPPLY CAN RANGE FROM 230V OR 110V.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC MEDICAL EQUIPMENT FOR MEDICAL USE

A TRANSCRANIAL MAGNETIC STIMULATION (TMS)…

A TRANSCRANIAL MAGNETIC STIMULATION (TMS) SYSTEM. A TRANSCRANIAL NERVE STIMULATOR PACKAGE, FOR CLINICAL TREATMENT OF MAJOR DRUG RESISTANT DEPRESSION.

THE SYSTEM IS A TREATMENT FOR MAJOR DEPRESSIVE DISORDER. TMS IS AN MEDICATION-FREE TREATMENT WHICH IS NON-EVASIVE AND NON-SYSTEMIC.

THE THERAPHY IS DESIGNED TO STIMULATES THE NERVES. TMS USES A FOCUSED ELECTROMAGNETIC COIL, TO RAPIDLY PULSE A MAGNETIC FIELD TO THE TARGETED AREA OF THE BRAIN.

THE MAGNETIC PULSES INDUCE AN ELECTRICAL CURRENT IN THE BRAIN, STIMULATING THE NERVE CELLS, INCREASING THE BRAIN ACTIVITY TO NORMAL LEVELS.

IT IS ASSOCIATED A NUMBER OF MEDICAL AND PSYCHIATRIC DISORDERS. THE SYSTEM COMPRISES OF A HORIZON STIMULATOR UNIT, HORIZON HV POWER SUPPLY UNIT, INTERACTIVE TOUCH SCREEN USER INTERFACE CONTROLLER, EZ COOL STIMULATING COIL, MOTOR THRESHOLD REMOTE COIL, EZ CART AND ZERO-GRAVITY ASSIST COIL ARM SYSTEM.

THE SYSTEM IS MADE OF FOLLOWING MATERIALS: CNC MACHINED STEEL; INJECTION MOULDED PLASTIC, VULCANISED RUBBER, COPPER CABLE, 25 WAY RIBBON CABLE ASSEMBLY, TRANSFORMER ASSEMBLY, HIGH VOLTAGE CAPACITOR, MOTHERBOARD ASSEMBLY AND A DAUGHTERBOARD ASSEMBLY, PCBS, LEDS, SEMIKRON THYRISTOR, HEATSINK ASSEMBLY.

ALSO, THERE IS A 120MM CASE FAN, PVC WITH AIR TUBING, 13A FUSE, NYLON SPACERS, NYLON PILLAR MOUNTS, TFT INTERFACE CABLE, ALUMINIUM WISHBONE, PLASTIC SHIELDING GASKET, VGA LED TOUCHSCREEN, UI BEZEL ASSEMBLY, SILICON SPONGE, POLYMIDE KAPTON TAPE,UI CONTROLLER BOARD ASSEMBLY, UI SWITCH BOARD ASSEMBLY, STEEL ARTICULATED COIL ARM, CLAMP HOLDER, CLAMP LEVER, EZ ARM EXTENSION BAR, EZ CART MAST, COPPER LITZ WIRE, GOLD CRIMP CONTACTS, PVC HEATSHRINK.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC MEDICAL EQUIPMENT FOR MEDICAL USE

A DIRECTLY CONNECTED PCB CONNECTOR WHICH…

A DIRECTLY CONNECTED PCB CONNECTOR WHICH CREATES A VERTICAL CONNECTION BETWEEN ONE BOARD AND ANOTHER.

IT IS USED FOR CONNECTING TWO PCBS AND IS CONNECTED DIRECTLY TO THE BOARD. IT ALLOWS SIGNALS TO BE SENT BETWEEN THE PCBS.

IT IS MANUFACTURED FROM THERMOPLASTIC MOULDING WITH INTEGRATED CONNECTORS. THE CONNECTOR IS TO BE MOUNTED ON THE PCB USING SOLDER.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC FOR PRINTED CIRCUITS CONNECTIONS THERMOPLASTIC

AN LOW-PROFILE ANALOGUE-ADDRESSABLE COMBINED…

AN LOW-PROFILE ANALOGUE-ADDRESSABLE COMBINED PHOTOELECTRIC SMOKE AND HEAT DETECTOR, WHITE IN COLOUR.

THE PRODUCT DETECTS SMOKE BY THE LIGHT SCATTER SENSING PRINCIPLE, USING A LIGHT EMITTING DIODE (LED) AND A PHOTO DIODE WITHIN ITS SENSING CHAMBER.

ALSO, WITH AN ADDITIONAL HIGHLY LINEAR THERMISTOR CIRCUIT FOR HEAT DETECTION WHICH IS PROGRAMMABLE BY THE FIREALARM SYSTEM CONTROL PANEL TO WORK AS EITHER A RATE-OF-RISE OR FIXED TEMPERATURE HEAT DETECTOR, WHICH IS ACTIVATED AT A TEMPERATURE 57 C (135 F.) THE PRIMARY FUNCTION OF THIS PRODUCT IS THE DETECTION OF SMOKE.

IT DOES NOT HAVE AN INTEGRAL SOUNDER OR RECORDING DEVICE. THE EXTERIOR LED SERVES ONLY TO INDICATE WHEN THE DETECTOR IS BEING POLLED BY ITS CONTROL PANEL OR TO SHOW THAT THE DETECTOR IS IN ALARM MODE.

THIS PRODUCT COMPRISES OF A PLASTIC (ABS TYPE) CASING CONTAINING METAL FASTENINGS AND CONNECTORS PLUS A POPULATED PRINTED CIRCUIT BOARD WITH THE SENSING ELEMENTS WITH ALSO A DUST PROTECTION MESH ATTACHED.

THE PRODUCT CANNOT BE USED ON A STAND-ALONE BASIS: IT CAN ONLY BE USED AS PART OF AN ANALOGUE-ADDRESSABLE FIRE ALARM CONTROL SYSTEM.

IT CAN BE SOLD SINGLY IN ITS OWN SMALL CARDBOARD BOX, BUT NORMALLY SOLD IN LARGER CARDBOARD BOXES CONTAINING 10 OR 100 UNITS.

DIMENSIONS OF DETECTOR HEAD 104MM X 41.3MM X WEIGHT 105G (DETECTOR HEAD ONLY.)

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC ELECTRONIC SENSORS ANALOGUE LED DETECTORS FOR BUILDINGS

THIS PRODUCT IS AN ANALOGUE-ADDRESSABLE OPTICAL…

THIS PRODUCT IS AN ANALOGUE-ADDRESSABLE OPTICAL SMOKE DETECTOR, THAT UTILISES THE LIGHT SCATTER SENSING PRINCIPLE.

THE PRODUCT ALSO INCORPORATES A LIGHT-EMITTING DIODE (LED) AND A PHOTO-DIODE IN ITS SENSING CHAMBER.

THE OPTICAL SMOKE DETECTOR COMPRISES A CIRCULAR ABS-TYPE PLASTIC CASING WHICH CONTAINS METAL FASTENINGS AND CONNECTING TERMINALS PLUS A POPULATED PRINTED CIRCUIT BOARD WITH THE SENSING ELEMENT ATTACHED.

THE OPTICAL SMOKE DETECTOR ALSO INCLUDES A CHEMICALLY ETCHED STAINLESS STEEL INSECT SCREEN TO MINIMISE INGRESS OF INSECTS AND AIRBORNE CONTAMINANTS AND A FURTHER EXTERIOR 360-DEGREE LED.

WHEN SMOKE ENTERS THE SENSING CHAMBER THE PHOTO-DIODE SENSES INCREASED LEVELS OF LIGHT SCATTERED BY THE SMOKE PARTICLES; THE DETECTOR THEN GOES INTO ALARM MODE.

THE LED USED IN THE SENSING CHAMBER IS AN ORANGE LED, PROVIDING STABLE RESPONSE ACROSS THE ENTIRE SMOKE SPECTRUM.

THE SMOKE SENSITIVITY OF THE DETECTOR CAN BE PROGRAMMED BY ITS ALARM SYSTEM CONTROL PANEL AND CAN COMPENSATE FOR INCREASING LEVELS OF CONTAMINATION OVER TIME.

THIS PRODUCT CANNOT BE USED ON ANY STAND-ALONE BASIS: IT IS ONLY USABLE WITH THE NITTAN NFU-7000 SERIES OF FIRE ALARM SYSTEM CONTROL PANELS.

THE EXTERIOR LED FITTED SERVES ONLY TO INDICATE WHEN THE DETECTOR IS BEING QUERIED BY ITS PANEL OR WHEN THE DETECTOR IS IN ALARM MODE: IT ISN'T INTENDED AS A VISUAL WARNING OF FIRE TO ANY PERSONS NEARBY AND PLAYS NO PART IN THE SENSING FUNCTION OF THIS PRODUCT.

NO QUANTITATIVE, CHEMICAL OR SPECTROSCOPIC ANALYSIS OF THE AIR WITHIN THE SENSING CHAMBER IS CARRIED OUT BY THIS PRODUCT.

THIS PRODUCT IS IMPORTED SPECIFICALLY FOR NITTAN EUROPE LTD AND CANNOT BE RE-SOLD AS AN "OFF THE SHELF" PRODUCT IN GENERAL STORES OR BY ANY NON-SPECIALIST OUTLET.

THIS PRODUCT IS COMPLIANT WITH UNDERWRITERS' LABORATORIES (UL) STANDARDS. ALSO, THIS PRODUCT CAN BE SOLD SINGLY IN A SMALL CARDBOARD BOX BUT IS MORE COMMONLY DESPATCHED WITHIN LARGER CARDBOARD CARTONS CONTAINING 10 OR 100 UNITS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC WITHOUT LOUDSPEAKER SENSORS

A BROADCAST STUDIO PRODUCTION SWITCHER WHICH…

A BROADCAST STUDIO PRODUCTION SWITCHER WHICH ALLOWS YOU TO PRODUCE BROADCAST QUALITY LIVE MULTI CAMERA PRODUCTION IN SD, HD OR ULTRA HD.

FEATURING 40 INPUT BUTTONS PER ROW AND 4 INDEPENDENT SYSTEM CONTROL LCDS FOR EACH ROW. THE PANEL INCLUDES 24 LCDS FOR CUSTOM LABELLING OF EVERY BUTTON ON EVERY ROW.

TRANSITION RATE DISPLAYS VIA MAIN MENU LCD MENU DISPLAYS. WITH FADER BAR, JOYSTICK AND NUMERIC KEYPAD.

INPUT VOLTAGE 2 X INTERNAL 100-240 V AC. WEIGHT IS 26KG, LENGTH 1110MM X WIDTH 755MM X HEIGHT 160MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC CHANGE-OVER SWITCHES FOR AUDIO SIGNALS SWITCHING DEVICES CONTROLLERS SIGNAL CONVERTERS FOR VIDEO SIGNALS

A STUDIO DIGITAL FILM 12K CAMERA THAT IS…

A STUDIO DIGITAL FILM 12K CAMERA THAT IS USED FOR RECORDING LIVE STUDIO PRODUCTIONS. ALSO, ABLE TO RECORD IN VERTICAL AND SQUARE VIDEO.

WITH THE RESOLUTION SENSOR IT IS ABLE TO REFRAME SHOTS IN 8K AND 4K. THE PRODUCT HAS A LIGHTWEIGHT, DURABLE COMPACT MAGNESIUM ALLOY BODY THAT HAS IN BUILT FEATURES, THAT ALLOWS FOR MULTI CAMERA PRODUCTION AND BROADCAST.

DIMENSIONS HEIGHT 5.92 X WIDTH 9.2 X LENGTH 5.78 INCHES X WEIGHT 2.5KG. THE STUDIO CAMERA HAS THE FOLLOWING FEATURES:- EFFECTIVE SENSOR SIZE: 27.03MM X 14.25MM (SUPER35) SCREEN DIMENSIONS: 4 INCH SCREEN TYPE: LCD CAPACITIVE TOUCHSCREEN.

SHOOTING RESOLUTIONS: 12,288 X 6480 (12K DCI) TALKBACK: SDI CHANNELS 15/16 AND IPHONE HEADSET.

COMPUTER INTERFACE: 1 X USB TYPE-C 3.1 GEN 2 WITH POWER DELIVERY FOR EXTERNAL DRIVE RECORDING. 1 X USB TYPE-C FOR SOFTWARE UPDATES.

FRAME RATES: 23.98, 24, 25, 29.97, 30, 50, 59.94 - 60 FPS SUPPORTED (MAXIMUM SENSOR FRAME RATE DEPENDENT ON RESOLUTION SELECTED.) EXTERNAL CONTROL: SDI CAMERA CONTROL PROTOCOL, IPAD CONTROL, BLUETOOTH CONTROL, 1 X 2.5MM LANC FOR LENS AND RECORD CONTROL.

ANALOG AUDIO INPUTS: 2 X XLR ANALOG SWITCHABLE BETWEEN MIC, LINE AND AES AUDIO. PHANTOM POWER SUPPORT.

CONTROLS: TOUCHSCREEN MENUS ON 4 INCH SCREEN. PUSH BUTTONS FOR OTHER CONTROLS. 3 ASSIGNABLE SHORTCUT KEYS.

LENS MOUNT: PL MOUNT INCLUDED. INTERCHANGEABLE WITH OPTIONAL EF AND F LENS MOUNTS. LENS CONTROL: 12PIN BROADCAST CONNECTOR FOR COMPATIBLE LENSES AND ELECTRONIC CONTROL VIA EF MOUNT PINS ON OPTIONAL EF LENS MOUNT.

REMOTE CONTROL: 1 X 2.5MM LANC INPUT FOR REC START/STOP, PLUS IRIS AND FOCUS CONTROL USING COMPATIBLE LENSES.

MICROPHONE: INTEGRATED STEREO MICROPHONE BUILT IN SPEAKER: 1 X MONO SPEAKER TOTAL VIDEO INPUTS: 1 X 12G-SDI TOTAL VIDEO OUTPUTS: 1 X 12G-SDI, 1 X 3G-SDI MONITORING SDI RATES: 1.5G, 3G, 6G, 12G.

POWER SUPPLY: 1 X EXTERNAL 12V

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC DIGITAL ANALOGUE LENSES MICROPHONES FOR VIDEO RECORDING VIDEO APPARATUS

VIDEO GAME CONSOLE PUT UP FOR RETAIL SALE…

VIDEO GAME CONSOLE PUT UP FOR RETAIL SALE IN A BOX. VIDEO GAMES CONSOLE FOR USE WITH A TELEVISION RECEIVER.

THE GAMES CONSOLE CONTAINS A CENTRAL PROCESSING UNIT (CPU), GDDR6 MEMORY AND A CUSTOM SOLID STATE DRIVE (SSD).

COMES WITH A WIRELESS CONTROLLER WITH A BUILT IN RECHARGEABLE LITHIUM ION BATTERY, USB CABLE, HDMI CABLE, AC POWER CORD, A BASE TO ATTACH TO THE CONSOLE AND A QUICK START GUIDE AND A SAFETY GUIDE

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: GOODS PUT UP IN SETS CABLES ELECTRONIC CONTROLLERS VIDEO GAMES GAME CONSOLES

VIDEO GAME CONSOLE PUT UP FOR RETAIL SALE…

VIDEO GAME CONSOLE PUT UP FOR RETAIL SALE IN A BOX. VIDEO GAMES CONSOLE FOR USE WITH A TELEVISION RECEIVER.

THE GAMES CONSOLE CONTAINS A CENTRAL PROCESSING UNIT (CPU), GDDR6 MEMORY AND A CUSTOM SOLID-STATE DRIVE (SSD) AND AN OPTICAL DRIVE (BD/DVD) THAT IS READ ONLY.

COMES WITH A WIRELESS CONTROLLER WITH A BUILT IN RECHARGEABLE LITHIUM ION BATTERY, USB CABLE, HDMI CABLE, AC POWER CORD, A BASE TO ATTACH TO THE CONSOLE AND A QUICK START GUIDE AND SAFETY GUIDE.

WITH BATTERIES AND INSTRUCTION MANUAL

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: GOODS PUT UP IN SETS CABLES ELECTRONIC CONTROLLERS VIDEO GAMES GAME CONSOLES