FLOW METERS.

CAUDALIMETRO 1 DÉBITMÈTRE 8 ÁRAMLÁSMÉRŐ 13 FLUSSOMETRI 2 DOORSTROMINGSMETERS 21 MIERNIKI PRZEPŁYWU 4 MERILNIKI PRETOKA 1 GENOMSTRÖMNINGSMÄTARE 1

FUEL FLOW METER FOR CIVIL GAS TURBINE AERO…

electronic; scientific and measuring equipment; for liquids;…

FUEL FLOW METER FOR CIVIL GAS TURBINE AERO ENGINE. THIS INSTRUMENT PROVIDES AN ACCURATE MEASUREMENT OF THE MASS FLOW RATE OF LIQUID FUEL TO THE GAS TURBINE ENGINE FUEL MANIFOLD.

THE MASS OF FUEL PASSING THROUGH A ROTATING IMPELLER CAUSES A DEFLECTION IN THE IMPELLER THAT, WITH THE USE OF MAGNETS, CREATES ELECTRICAL PULSES.

THE TIME BETWEEN PULSES IS DIRECTLY PROPORTIONAL TO THE MASS FLOW RATE OF THE FUEL. THE SIGNAL FROM THE FUEL FLOW METER IS THEN SUPPLIED TO THE ENGINE ELECTRONIC CONTROLLER WHICH PROCESSES THE OUTPUT WAVEFORMS AND TRANSMITS THE REQUIRED INFORMATION TO AN ENGINE INDICATION DISPLAY AS PART OF THE CREW ALERTING SYSTEM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT FOR LIQUIDS AEROPLANES FLOW METERS

FLOSTEM METER SHIELD THIS IS A DEVICE FOR…

FLOSTEM METER SHIELD THIS IS A DEVICE FOR PROVIDING ACCESS TO SET VOLUMES OF WATER TO RESIDENTIAL AND COMMERCIAL PROPERTIES.

IT IS FITTED IN PLACE OF A STANDARD WATER METER AND ALLOWS UNRESTRICTED ACCESS TO A PRE SET VOLUME OF WATER.

WHEN THE LIMIT IS REACHED, THE DEVICE REDUCES THE FLOW OF WATER TO A TRICKLE FLOW. THE DEVICE CAN BE RE-SET TO PROVIDE ANOTHER PRE-SET VOLUME AT UNRESTRICTED FLOW RATE BY PUSHING THE RE-SET BUTTON ON TOP.

THE DEVICE IS DESIGNED TO RESTRICT UNAUTHORISED ACCESS TO WATER IN PROPERTIES THAT ARE NOT REGISTERED WITH THE WATER COMPANY (EMPTY PROPERTIES) THE DEVICE WILL ALSO HELP AS A TOOL FOR DEBT RECOVERY.

PACKAGING - SIMPLE CARDBOARD BOX; TYPICALLY 12 UNITS TO A SHIPPING CARTON END USERS- WATER BOARD COMPANIES (THE PRODUCT CAN BE RE-USED.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: WATER MECHANICAL FLOW METERS

A FUEL METERING UNIT FMU). AN ELECTROHYDRAULIC…

A FUEL METERING UNIT FMU). AN ELECTROHYDRAULIC SYSTEM THAT OPERATES WITH A SEPARATE ELECTRONIC ENGINE CONTROL . IT METERS FUEL FLOW TO THE GROWTH VERSIONS OF PRATT & WHITNEY PW4000 SERIES OF AIRCRAFT ENGINES. FOR USE IN AIRBUS A330 COMMERCIAL AIRCRAFT.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRIC TRANSPORT EQUIPMENT SCIENTIFIC AND MEASURING EQUIPMENT HYDRAULIC FOR LIQUIDS AIRCRAFT PARTS FLOW METERS

Powder Flow Tester see technical literature…

Powder Flow Tester see technical literature attached THE POWDER FLOW TESTER MEASURES THE FLOW BEHAVIOUR OF BULK SOLID MATERIALS THAT HAVE A TOP PARTICLE SIZE OF 2MM.

AT LEAST 90% OF THE SAMPLE SHOULD CONSIST OF PARTICLES LESS THAN 1MM IN DIAMETER. OPERATION AND CONTROL OF THE POWDER FLOW TESTER IS ACCOMPLISHED WITH POWDER FLOW PRO SOFTWARE THE FLOW TESTER CAN BE USED TO MEASURE, DISPLAY AND PRINT OUT FLOW RESULTS AT SPECIFIED COMPACTION LOADS.

THE PRINCIPAL OF THE OPERATION IS TO DRIVE A COMPRESSION LID VERTICALLY DOWNWARDS INTO A POWDER SAMPLE CONTAINED IN AN ANNULAR SHEAR CELL.

THE POWDER SAMPLE HAS A DEFINED VOLUME AND THE WEIGHT OF THE SAMPLE IS MEASURED BEFORE THE START OF THE TEST.

A CALLIBRATED BEAM LOAD CELL IS USED TO CONTROL THE COMPACTION STRESS APPLIED TO THE POWDER.

THE ANNULAR SHEAR CELL IS THEN ROTATED AT A DEFINED SPEED AND THE TORQUE RESISTANCE OF THE POWDER IN THE SHEAR CELL MOVING AGAINST THE POWDER IN THE STATIONARY LID IS MEASURED BY CALIBRATED REACTION TORQUE SENSOR.

THE GEOMETRIES OF THE LID, SHEAR CELL, ROTATIONAL SPEED OF THE CELL AND THE COMPRESSIVE LOADS APPLIED TO THE POWDER ALL CONTRIBUTE TO THE CALCULATIONS WHICH DETERMINE 'FLOWABILITY' OF THE POWDER.

WHATS INCLUDED STANDARD VOLUME 230CC TROUGH & 33CC VANE LID (263cc) SMALL VOLUME 38cc TROUGH & 5cc VANE LID (43cc) NSTRUMENT, CHOICE OF 115 OR 230V POWDER FLOW PRO SOFTWARE WITH USB CABLE TROUGH (230cc) VANE LID (33cc) WALL FRICTION LID: 304s/s WITH 2B FINISH OUTER CATCH TRAY INNER CATCH TRAY WITH SCRAPING TOOL POWDER SCOOP CLEANING BRUSH

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC SCIENTIFIC AND MEASURING EQUIPMENT FOR TESTING FLOW METERS