FOR PROTECTION.

ЗА ЗАЩИТА 8 K OCHRANĚ 213 TIL BESKYTTELSE 21 ZUM SCHUTZ 301 ΓΙΑ ΠΡΟΣΤΑΣΙΑ 16 PARA PROTECCION 104 SUOJAAMISTA VARTEN 57 POUR PROTECTION 1311 ZA ZAŠTITU 2 VÉDELMI CÉLRA 7 PER PROTEZIONE 56 APSAUGAI 4 AIZSARDZĪBAI 7 VOOR HET BESCHERMEN 559 DLA OCHRONY 114 PARA PROTECCAO 1 PENTRU PROTECŢIE 26 NA OCHRANU 23 ZA ZAŠČITO 16 SKYDDANDE 103

SHORT CIRCUIT ISOLATOR FOR USE WITH ANALOGUE-ADDRESSABLE…

SHORT CIRCUIT ISOLATOR FOR USE WITH ANALOGUE-ADDRESSABLE FIRE ALARM CONTROL SYSTEMS & DEVICES.

THIS MODULE INCLUDES SETTING OPTIONS FOR CLASS A OR CLASS B ZONE INPUT(S). LIGHT EMITTING DIODES (LEDS) ARE PROVIDED TO INDICATE INPUT & OUTPUT ACTIVE, FAULT & ISOLATOR OPEN.

TO ADDRESS THIS DEVICE ON THE FIRE ALARM CONTROL SYSTEM ANOTHER DEVICE IS USED FOR PROGRAMMING.

THE SHORT CIRCUIT ISOLATOR IS INTENDED ONLY TO ISOLATE THIS DEVICE FROM THE REST OF ITS NETWORK IN THE EVENT OF A FAULT - IT ISN'T INTENDED AS A PROTECTIVE SAFETY FEATURE.

THE ISOLATOR WILL SELF RESET WHEN THE FAULT CLEARS. ADDITIONAL RESISTORS ARE REQUIRED FOR FAULT & ALARM MONITORING.

THE EU VARIANT DIFFERS ONLY IN SIZE, IN ORDER TO FIT EU-SIZE ELECTRICAL ENCLOSURES. THIS PRODUCT COMPRISES A POLYCARBONATE ABS-TYPE PLASTIC CASING CONTAINING METAL FASTENERS, SCREWS, RELAYS, LEDS & CONNECTORS.

THIS PRODUCT IS NOT DESIGNED FOR THE PURPOSES OF PHYSICAL OR CHEMICAL ANALYSIS & CANNOT BE USED ON A STAND-ALONE BASIS: IT CAN ONLY BE USED AS PART OF AN ANALOGUE-ADDRESSABLE FIRE ALARM CONTROL SYSTEM.

OPERATING DATA:- OPERATING LOOP VOLTAGE 20 TO 38 VOLTS DC ALARM CURRENT 35.0 MILLIAMPS MAX OPERATING VOLTAGE(ZONE) 12 TO 18 VOLTS DC

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC WITH LED DISPLAY DETECTORS FOR PROTECTION CONTROL EQUIPMENT PARTS ELECTRONIC CIRCUITS

CIRCUIT ISOLATOR FOR USE WITH ANALOGUE-ADDRESSABLE…

CIRCUIT ISOLATOR FOR USE WITH ANALOGUE-ADDRESSABLE FIRE ALARM CONTROL SYSTEMS AND DEVICES. THIS MODULE INCLUDES SETTING OPTIONS FOR A NORMALLY CLOSED CONTACT INPUT & FAIL SAFE MODE FOR DOOR RELEASE REQUIREMENT.

LIGHT EMITTING DIODES ARE PROVIDED TO INDICATE INPUT & OUTPUT ACTIVE, FAULT & ISOLATOR OPEN.

TO ADDRESS THIS DEVICE ON THE FIRE ALARM CONTROL SYSTEM ANOTHER DEVICE IS USED FOR PROGRAMMING.

THE SHORT CIRCUIT ISOLATOR IS INTENDED ONLY TO ISOLATE THE DEVICE FROM THE REST OF ITS NETWORK IN THE EVENT OF A FAULT ALLOWING THE DEVICE TO CONTINUE COMMUNICATION FROM THE OTHER SIDE.

IT ISN'T INTENDED AS A PROTECTIVE SAFETY FEATURE. THE ISOLATOR WILL SELF-RESET WHEN THE FAULT CLEARS.

THIS PRODUCT COMPRISES A POLYCARBONATE PLASTIC CASING TO FIT STANDARD UK 2-GANG ENCLOSURES CONTAINING METAL FASTENERS, SCREWS, RELAYS, LIGHT EMITTING DIODES & CONNECTORS; A SIMILAR VERSION TO FIT EU-SIZE ENCLOSURES IS ALSO OFFERED.

OPERATING DATA:- OPERATING LOOP VOLTAGE 20 TO 38 VOLTS DC ALARM CURRENT 5.5 MILLIAMPS OUTPUT RELAY CONTACT RATING:- 1 X 5 AMPS @ 240 VOLTS AC OR 5 AMPS @ 30 VOLTS DC

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC WITH LED DISPLAY DETECTORS FOR PROTECTION CONTROL EQUIPMENT PARTS ELECTRONIC CIRCUITS

PRODUCT :- PHOTO-IMAGEABLE SOLDERMASK. COMPRISES…

as liquid; chemical preparations; for printed circuits; for protection;…

PRODUCT :- PHOTO-IMAGEABLE SOLDERMASK. COMPRISES OF A LIGHT SENSITIVE LIQUID PREPARATION USED IN PHOTO LITHOGRAPHIC APPLICATIONS, IN THE MANUFACTURE OF SEMICONDUCTOR MATERIALS 2 PACK COATING SYSTEM.

PART 1 IS THE HARDENER AND THE 2ND CALLED THE RESIST. ONE OF THE 2 PARTS WILL CONTAIN A PIGMENT, OFTEN GREEN BUT OCCASIONALLY OTHER COLOURS.

EACH PART HAS IT OWN UNIQUE REFERANCE NUMBER BUT THEY ARE SOLD AND PRESENTED WITHIN THE SAME CONSIGNMENT IN THE APPROPRIATE RATIOS, EG: 20 X 1KG TINS OF HARDENER WITH 20 X 3KG TINS OF RESIST.

WHEN MIXED THE 2 PARTS CONTAIN THE FOLLOWING COMPONENTS: EPOXY/ PHOTOSENSITIVE RESINS, ORGANIC SOLVENTS, PHOTO INITIATORS, SILICATES SILANES.

ADDITIVES VARY DEPENDING ON CUSTOMER SPECIFICATIONS. THEY ARE USED TO COAT CIRCUIT BOARDS. IT OFFERS A PROTECTIVE NON-CONDUCTIVE DIELECTRIC LAYER THAT WHEN APPLIED ONTO THE PRINTED CIRCUIT BOARD ASSEMBLY WILL PROTECT THE ELECTRONIC ASSEMBLY FROM DAMAGE DUE TO CONTAMINATION, SALT SPRAY MOISTURE, FUNGUS, DUST AND CORROSION.

HARDENER AND RESIST SOLD/PRESENTED TOGETHER AND IN THE APPROPRIATE RATIOS FOR MIXING AT THE END USER PREMISES.

WHEN MIXED/THINNED THE COATING IS APPLIED TO THE WHOLE CIRCUIT BOARD AND 'PRE BAKED' TO REMOVE THE SOLVENTS.

CIRCUIT BOARD CAN BE COATED IN VARIOUS WAYS INCUDING 'CURTAIN COATING' & 'SPRAY COATING'.

CIRCUIT BOARD HAS A TEMPLATE/ IMAGE APPLIED AND THEN UNDERGOES A UV CURING STEP. ALL COVERED AREAS REMAIN UNCURED AND THEN THE BOARD IS SENT THROUGH A 'DEVELOPER' SOLUTION TO REMOVE ANY UNCURED COATING BEFORE UNDERGOING THE DRYING PROCESS

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: AS LIQUID CHEMICAL PREPARATIONS FOR PRINTED CIRCUITS FOR PROTECTION ORGANIC COMPOSITE SOLVENTS

UNISEX SHORTS, INTENDED TO BE WORN FOR HIKING…

of textile material; shorts; knitted; of nylon; for sport; for…of textile material; shorts; knitted; of nylon; for sport; for…

UNISEX SHORTS, INTENDED TO BE WORN FOR HIKING DURING SAILING, AS PART OF A PROTECTIVE LAYERING SYSTEM TO PROTECT THE LEG.

WITH ELASTICATED WAIST WITH DRAWSTRING TIGHTENING, WITH SILICON GRIP AT WAIST AND LEG ENDS IN ORDER TO STOP SHORTS RIDING UP.

ENVELOPING EACH LEG SEPERATELY. WITH INTERNAL POCKETS IN EACH LEG WHICH ALLOWS REINFORCED INTERNAL PADS/BATTENS TO BE HELD IN POSITION. 4 WAY STRETCH FABRIC , MADE FROM 88% NYLON AND 12% ELASTANE.

BLACK IN COLOUR WITH A MESH PANNEL DOWN EACH LEG WITH ORANGE STITCHING. COMPANY LOGO PRINTED ON ONE LEG AND THE WORDS GRAVITY HIKE ON THE REAR.

HEMMED.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF TEXTILE MATERIAL SHORTS KNITTED OF NYLON FOR SPORT FOR PROTECTION