FORGED.

KOVANÉ 20 SMEDET 4 GESCHMIEDET 69 FORJADO 4 TAOTTU 7 FORGÉ, ABSTRAIT 33 KOVÁCSOLT 33 FUCINATO 3 KALTS 1 GESMEED 17 KUTY 7 FORJAT 13 KOVANÉ 23 SMIDD 2

THE OUTER RING MADE FROM S55C FORGED STEEL…

THE OUTER RING MADE FROM S55C FORGED STEEL CONTAINING MORE THAN 0.25% CARBON HAS BEEN FORGED TURNED AND DRILLED.

IT'S IN A SEMI-FINISHED STATE AS NEEDS TO BE GROUNDED AND SUPER FINISHED BEFORE BEEN ASSEMBLED INTO THE COMPLETE FINISHED PRODUCT.

THE OUTER RING IS A COMPONENT FOR 2DACF BEARING (2ND GENERATION DOUBLE ANGULAR CONTACT FLANGED).

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL FORGED DRILLED

HEXAGONAL NUT MADE OF FORGED STEEL THE PART…

of steel; forgedof steel; forged

HEXAGONAL NUT MADE OF FORGED STEEL THE PART IS A FORGED NUT MADE OF STEEL. APPROXIMATELY 10mm X 8mm.

CENTRAL MACHINED METRIC THREAD OF APPROXIMATELY 6MM. THE NUT IS USED TO CONNECT COMPONENTS WITHIN AN AUTOMOTIVE TURBOCHARGER ACTUATOR THAT FITS ONTO A TURBOCHARGER.

THE ACTUATOR CONTROLS THE SPEED OF THE TURBO CHARGER. IT HAS BEEN DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINES.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL FORGED

THIS PART IS CALLED AN INNER SHAFT. THIS…

THIS PART IS CALLED AN INNER SHAFT. THIS FORGED PART IS MADE FROM S55C LS CARBON STEEL. IT IS OF CIRCULAR CROSS SECTION.

THESE PARTS ULTIMATELY END UP BEING ASSEMBLED IN TO A 3RD GENERATION ANGULAR CONTACT FLANGED BEARING BUT MANY PROCESSES TO THESE PARTS ARE NEEDED TO MAKE THEM SUITABLE FOR ASSEMBLY INTO A BEARING.

THESE PARTS ARE SUBJECT TO THE FOLLOWING IN HOUSE PROCESSES BEFORE BEING USED AS PART OF A BEARING: TURNING, INDUCTION HEAT TREATMENT, TEMPERING, DRILLING, TAPPING, GRINDING INCLUDING THAT OF RACEWAY THEY CAN ONLY BECOME PART OF A BEARING AFTER THESE MANY MACHINING PROCESSES WHICH ADD THE RACEWAY AND DEFINE THEM AS A BEARING PART EXCLUSIVELY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL BEARING HOUSINGS FORGED

SEMI-FINISHED FORGED PART, MADE FROM S55C…

SEMI-FINISHED FORGED PART, MADE FROM S55C LS CARBON STEEL. IT IS OF CIRCULAR CROSS SECTION. THESE PARTS ULTIMATELY END UP BEING ASSEMBLED IN TO A 3RD GENERATION ANGULAR CONTACT FLANGED BEARING BUT MANY PROCESSES TO THESE PARTS ARE NEEDED TO MAKE THEM SUITABLE FOR ASSEMBLY INTO A BEARING.

THESE PARTS ARE SUBJECT TO THE FOLLOWING IN HOUSE PROCESSES BEFORE BEING USED AS PART OF A BEARING: TURNING, INDUCTION HEAT TREATMENT, TEMPERING, DRILLING, TAPPING, GRINDING.

THEY CAN ONLY BECOME PART OF A BEARING AFTER THESE MANY MACHINING PROCESSES WHICH ADD THE RACEWAY AND DEFINE THEM AS A BEARING PART EXCLUSIVELY

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL FORGED