HOLLOW.

КУХИНА, ВДЛЪБНАТИНА 2 DUTÝ 30 HOHL 398 HUECO 15 ONTTO 2 CREUX 63 CAVO 7 TUŠČIAVIDURIAI 2 DOBS 9 HOL 32 PUSTY W ŚRODKU 12 DUTÝ 9 VOTEL 13 IHÅLIG 37

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

sections; of steel; hollow; tubes; welded; non-alloy steel

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A NON-CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH A WALL THICKNESS NOT EXCEEDING 2MM, MAXIMUM CROSS SECTION DIMENSION 40X40CM, LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: SECTIONS OF STEEL HOLLOW TUBES WELDED NON-ALLOY STEEL

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A NON-CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH A WALL THICKNESS EXCEEDING 2MM, MAXIMUM CROSS SECTION DIMENSION 40X40CM, LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: SECTIONS OF STEEL HOLLOW TUBES WELDED NON-ALLOY STEEL

A VISUAL PLUG INDICATOR OF ALUMINIUM WHICH…

A VISUAL PLUG INDICATOR OF ALUMINIUM WHICH INDICATES IF A VALVE IS IN AN OPEN OR CLOSED POSITION.

IT IS USED TOGETHER WITH A VISUAL INDICATOR CAP (CAP IS NOT SUBJECT OF THIS BTI APPLICATION) AND THE PLUG AND CAP ARE SCREWED TOGETHER.

THE PISTON OF THE VALVE PUSHES THE PLUG AND CAP UPWARDS WHICH IS THEN VISABLE AND INDICATES THAT THE VALVE IS OPEN.

IT IS NOT AN ESSENTIAL PART OF THE VALVE. IT HAS A FLAT HEAD AND IS HOLLOW THROUGHOUT. IT IS THREADED INTERNALLY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF ALUMINIUM HOLLOW ALUMINIUM THREADED VALVES THREADED ARTICLES

NON METALLIC ENCLOSURES MADE FROM HOT COMPRESSED…

NON METALLIC ENCLOSURES MADE FROM HOT COMPRESSED MOULDED FIBERGLASS REINFORCED POLYESTER COMPOSITION.

PRODUCT INCORPORATES AN ALUMINIUM CHASSIS PLATE PUNCHED WITH HOLES, FOR PLASTIC INSERTS OR SCREWS.

THE PRODUCT CAN BE WALL MOUNTED AND IS USED FOR THE ATTACHMENT OF POWER SUPPLIES, DATA LOGGERS AND PERIPHERALS.

THE INSERTS ARE EASILY PUSHED IN, ALLOWING THE RAPID MOUNTING OF COMPONENTS INSIDE THE ENCLOSURE.

A CABLE GLAND IS FITTED TO ENABLE DIRECT ENTRY OF ONE OR MORE CABLES. AVAILABLE IN FOUR SIZES.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF POLYESTER HOLLOW FOR INDUSTRIAL USE REINFORCED GLASS FIBRES