MACHINE PARTS.

ЧАСТИ ЗА МАШИНИ 6 STROJNÍ ČÁSTI A SOUČÁSTI 25 MASKINDELE 1 MASCHINENTEILE 677 PARTES DE MAQUINA 60 MASINATE OSAD 2 KONEEN OSA 16 PARTIES DE MACHINE 43 DIJELOVI STROJEVA 1 GÉPALKATRÉSZEK 94 PARTI DI MACCHINA 178 MACHINEONDERDELEN 46 CZĘŚCI MASZYN 189 PĂRŢI DE MAŞINI 2 ČASTI STROJOV 31 DELI STROJEV 14 MASKINDELAR 16

GLAND/SLEEVE MADE OF STAINLESS STEEL. FOR…

GLAND/SLEEVE MADE OF STAINLESS STEEL. FOR USE IN A VALVE. IT IS CYLINDRICAL IN SHAPE WITH A HOLLOW CENTRE. IT IS MACHINED AND MANUFACTURED TO EXACT SPECIFICATIONS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STAINLESS STEEL MACHINE PARTS MECHANICAL SHAPED

A CRANK IS MADE FROM PRESS STEEL, APPROXIMATE…

A CRANK IS MADE FROM PRESS STEEL, APPROXIMATE DIMENSION 2.3 X 1.8 CM, FOR USE IN THE ASSEMBLY TO A TURBO CHARGER ACTUATOR. THE ACTUATOR THEN CONTROLS THE VALVE ON A TURBO CHARGER WHICH IN TURN CONTROLS THE SPEED OF A TURBO CHARGER. THE ACTUATOR IS ATTACHED TO AN AUTOMOTIVE ENGINE.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL MACHINE PARTS

EWS DOM (ELECTRIC WELDED DRAWN OVER MANDREL…

EWS DOM (ELECTRIC WELDED DRAWN OVER MANDREL ) MECHANICAL TUBES, MACHINED TO A SPECIFIC LENGTH WITH A 0.5MM CHAMFER.

THERE ARE 45 PART REFERENCES MACHINED TO 4 SIZE LENGTHS RANGING FROM 7.01M TO 7.62M. THERE ARE 29 PART REFERENCES MACHINED TO 4 SIZE LENGTHS RANGING FROM 53MM TO 198MM.

THE PARTS ARE USED IN THE MANUFACTURE OF HYDRAULIC TIPPING CYLINDERS. THEY ARE THE MAIN STRUCTURAL PART OF THE CYLINDER MAKING UP 70% OF THE WEIGHT OF THE UNIT.

THE PARTS ARE ORDERED TO REQUIREMENTS. TUBES MADE FROM STEEL GRADE E355 06 - THE TUBES ARE WELDED AS PER EDS008 SPECIFICATION 9000

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MACHINE PARTS HYDRAULIC

EWS DOM (ELECTRIC WELDED DRAWN OVER MANDREL…

EWS DOM (ELECTRIC WELDED DRAWN OVER MANDREL ) MECHANICAL TUBES, MACHINED TO A SPECIFIC LENGTH WITH A 0.5MM CHAMFER.

THERE ARE 45 PART REFERENCES MACHINED TO 4 SIZE LENGTHS RANGING FROM 0.53MM TO 198MM. THE PARTS ARE USED IN THE MANUFACTURE OF HYDRAULIC TIPPING CYLINDERS.

THEY ARE THE MAIN STRUCTURAL PART OF THE CYLINDER MAKING UP 70% OF THE WEIGHT. THE PARTS ARE ORDERED TO REQUIREMENTS.

TUBES MADE FROM STEEL GRADE E355 06 - THE TUBES ARE WELDED AS PER EDS008 SPECIFICATION 9000

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MACHINE PARTS HYDRAULIC