MACHINERY.

МАШИНИ 23 STROJNÍ ZAŘÍZENÍ 42 MASKINER 33 MASCHINE 2422 ΜΗΧΑΝΗΜΑ 1 MAQUINA 24 KONE 5 MACHINE 238 GÉPI BERENDEZÉSEK 7 MACCHINE 61 MEHĀNISMI 2 MACHINES 89 MASZYNY 37 MAQUINA 23 STROJE 8 STROJI IN MEHANIZMI 4 MASKIN 32

A SLIP YOKE ASSEMBLY IS AN ESSENTIAL COMPONENT…

of steel; assemblies; machinery

A SLIP YOKE ASSEMBLY IS AN ESSENTIAL COMPONENT OF ANY DRIVE SHAFT AS IT ALLOWS THE U-JOINTS TO ROTATE PROPERLY WITHIN THE DRIVE SHAFT.

THE SLIP YOKE ALLOWS THE DRIVE SHAFT TO FLEX OR 'SLIP'. THE SLIP YOKE CONSISTS OF THE FOLLOWING COMPONENTS SUCH AS A SPLINE, WELCH PLUG A DUST CAP WHICH IS USUALLY SUPPLIED WITH ANY SLIP YOKE AS IT IS AN ESSENTIAL PART WHEN THE SLIP YOKE IS INSTALLED INTO A DRIVE SHAFT.

THIS ITEM IS DESIGNED TO BE USED SOLELY AND PRINCIPALLY IN HIGHWAY MACHINES AND HEAVY-DUTY INDUSTRIAL APPLICATIONS.

THE SLIP YOKE IS PREDOMINANTLY MADE OF STEEL, IN A 'Y' SHAPE, THE LENGTH IS APPROXIMATELY 6.81CM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL ASSEMBLIES MACHINERY

A WORK LAMP FOR USE ON VARIOUS TYPES OF VEHICLES…

led; machinery; spotlights

A WORK LAMP FOR USE ON VARIOUS TYPES OF VEHICLES AND MACHINERY INCLUDING, BUT NOT LIMITED TO AGRICULTURAL VEHICLES, COMMERCIAL VEHICLES AND TRAILERS, CONSTRUCTION MACHINERY, AUTOMOTIVE VEHICLES AND TRAILERS.

IT HAS A VOLTAGE BETWEEN 12V-24V. IT CONSISTS OF 16 SMD LED BULBS GIVING A WATTAGE RATE OF 48W.

THE HOUSING IS MADE FROM AN ACRYLONITRILE BUTADIENE STYRENE WITH A SINGLE THIN LAYER OF GRAPHITE WITH A STEEL BRACKET.

THE ENTIRE UNIT MEASURES 110M WIDE BY 28M THICK. THE LAMP IS POWERED BY THE BATTERY OF THE VEHICLE IT IS FITTED TO.

THE LAMP IS CONTROLLED BY THE VEHICLE DASHBOARD CONTROL PANEL.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: LED MACHINERY SPOTLIGHTS

NON CELLUAR VULCANISED EPDM RUBBER (ETHYLENE…

profiled; rubber; machinery; machine parts; manufactured to shape;…

NON CELLUAR VULCANISED EPDM RUBBER (ETHYLENE PROPYLENE DIENE MONOMER RUBBER)EXTRUDED SOLID RUBBER PROFILE. THEY ARE USED TO PREVENT STEEL ON STEEL WEAR ON MACHINES. THE FUNCTION OF THE MACHINE IS TO WASH AND SCREEN SAND AND GRAVEL.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: PROFILED RUBBER MACHINERY MACHINE PARTS MANUFACTURED TO SHAPE CUT TO SHAPE EPDM

PLASTICS ANALYSER USED FOR THE RAPID MEASUREMENT…

PLASTICS ANALYSER USED FOR THE RAPID MEASUREMENT OF THERMO PLASTIC MATERIALS IN THE MANUFACTURING AND QUALITY ASSURANCE DEPARTMENTS.

THE INSTRUMENT IS ABLE TO DETERMINE AMORPHICITY, THE GLASS TRANSITION TEMPERTATURE, TG, THE MELTING AND END POINT.

THE INSTRUMENT MEASURES THESE IN FAST THERMAL SCAN FROM 45 DEGREES (OR SOMETIMES LOWER) UP TO A MAXIMUM OF 350 DEGREES.

THE MONITORING OF THE SAMPLE MOULDING IS DETERMINED BY AN LED LIGHT SOURCE AND THE LEVEL OF LIGHT FALLING ONTO A SENSOR.

SAMPLE SIZE: 20-30 MG(ONE OR TWO PLASTIC GRANULES, PLASTIC FILM, OR A PIECE FROM A MOULDED PART)

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: PLASTICS MACHINERY FOR ANALYSIS WITH OPTICAL SYSTEMS