MEDICAL INSTRUMENTS.

LÉKAŘSKÉ NÁSTROJE/PŘÍSTROJE 36 MEDIZINISCHES INSTRUMENT 276 INSTRUMENTO MEDICO 6 INSTRUMENT MÉDICAL 23 STRUMENTI MEDICI 20 MEDICINOS PRIETAISAI 2 MEDISCHE INSTRUMENTEN 103 PRZYRZĄDY, NARZĘDZIA MEDYCZNE 10 INSTRUMENTO MEDICO 10 INSTRUMENTE MEDICALE 1 LEKÁRSKE NÁSTROJE 7 MEDICINSKI INSTRUMENTI 14 MEDICINSKT INSTRUMENT 10

A ENDOSCOPE ACCESSORY, USED TO ASSIST WITH…

A ENDOSCOPE ACCESSORY, USED TO ASSIST WITH THE COMPLETE AND ACCURATE POSITIONING OF AN ENDOSCOPE IN THE LARGE INTESTINE.

THE ACCESSORY IS FITTED TO THE END OF THE ENDOSCOPE. IT ASSISTS WITH OPTICAL VISUALISATION, DIAGNOSIS AND ENDOSCOPIC TREATMENT OF A PATIENT.

IT IS A NON-STERILE, SINGLE USE, DISPOSABLE, LOOSE-FITTING SLEEVE THAT FITS OVER A STANDARD ENDOSCOPE THAT HAS A DISTAL TIP OUTER DIAMETER OF BETWEEN 12.5 - 14.3 MM AND A WORKING LENGTH OF 1680MM OR GREATER.

THE DEVICE EMPLOYS 2 BALLOONS TO POSITION AND STABILISE THE ENDOSCOPE WITHIN THE PATIENT'S LARGE INTESTINE.

ONE BALLOON IS BEHIND THE BENDING SECTION OF THE ENDOSCOPE (AFT BALLOON) AND THE SECOND IS IN FRONT OF THE TIP OF THE ENDOSCOPE (FORE BALLOON).

WHEN BOTH BALLOONS ARE DEPLOYED AND INFLATED THE AREA IN BETWEEN IS STABILISED. THE BALLOONS CAN INFLATE UP TO 6CM IN DIAMETER.

THE ACCESSORY CONSISTS OF COMPONENT PARTS WHICH ARE DETAILED BELOW, TOGETHER WITH THE CORRESPONDING MATERIALS: COMPONENTS MATERIAL: BALLOON POLYURETHANE, LOW DUROMETER SLEEVE CORE EXTRUSION: PELLETHANE 2363-80A WITH 2.5% GLYCOTUBE TRANSLUCENT, PUSHROD COEXTRUSION INNER - PFA (PERFLUOROALKOXY), INFLATION COEXTRUSION INNER - PEBAX (POLYETHER BLOCK AMIDE) 7233 SA01 MED PUSH ROD ISOPLAST 2510 (POLYURETHANE) ADHESIVE DYMAX 208-CTH-F AFT BALLOON PELLETHANE 90A FORE BALLOON SADDLE TIP PEBAX 4033 SA01 MED THE BALLOONS, PUSH RODS, SLEEVE AND AFT BALLOON INFLATION TUBE MAY ALL CONTACT THE INSIDE OF THE LARGE INTESTINE DURING A MEDICAL PROCEDURE.

THE PRODUCT IS PACKAGED IN A THERMOFORMED TRAY AND LID SEALED WITH A COATED TYVEK COVER. THE TRAY IS PLACED IN A SHELF BOX TO FURTHER PROTECT THE DEVICE DURING TRANSPORTATION AND STORAGE.

THE INSTRUCTIONS FOR USE ARE ALSO INSERTED INTO THE LABELLED SHELF BOX. THE PRODUCT HAS A SHELF LIFE OF SIX MONTHS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MEDICAL EQUIPMENT MEDICAL INSTRUMENTS PRECISION EQUIPMENT ENDOSCOPES MEDICAL EQUIPMENT PARTS

FULLY ENCAPSULATED SYRINGE UNIT CONSISTING…

FULLY ENCAPSULATED SYRINGE UNIT CONSISTING OF: SYRINGE BODY, CONNECTOR HOUSING, PLUNGER ROD, SCREW, CANNULAS, PISTON, SEPTUM, SYRINGE LID, LID DISC, NEEDLE COMPARTMENT, SEAL RING, SEAL TUBE, LUBRICANT, O-RING AND HANDLE.

THE SYRINGE PREVENTS CONTAMINATION OF THE PLUNGER WITH DRUGS AND IS EQUIPPED WITH A BUILT-IN CLOSED PRESSURE EQUALIZATION SYSTEM WITH FACTORY SEALED STERILE AIR CHAMBER.

THE EASY TO USE SINGLE MOTION PREVENTS LEAKS AND DRUG RESIDUALS ON ITS SURFACES AND IS FACTORY WELDED TO THE SYRINGE.

DUE TO THE TIGHT AIRTIGHT ENCAPSULATION OF THE SYRINGE BARREL THE PLUNGER CANNOT BE PULLED OUT OF THE SYRINGE, PROVIDING AN ADDITIONAL LAYER OF PROTECTION AGAINST SPILLS.

FROM 1mm TO 60mm IN VOLUME

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC MEDICAL EQUIPMENT MEDICAL INSTRUMENTS

CYTOLOGY AND BRONCHIAL BRUSHES USED FOR OPTIMAL…

CYTOLOGY AND BRONCHIAL BRUSHES USED FOR OPTIMAL SPECIMEN COLLECTION OF A PATIENT DURING A MEDICAL PROCEDURE. THE BRUSHES ARE INSERTED INTO A SPECIAL TYPE OF MEDICAL SCOPE SO A BIOPSY CAN BE TAKEN FROM A SPECIFIC AREA INSIDE THE HUMAN BODY. SIZE BRUSH 3.0MM DIAMETER,1.8 MMX120CM LENGTH

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MEDICAL EQUIPMENT BRUSHES MEDICAL INSTRUMENTS

A CHASSIS MOULDING OF PLASTIC BEING PART…

A CHASSIS MOULDING OF PLASTIC BEING PART OF A WEARABLE DEVICE THAT IS USED FOR AUTOMATED INSULIN DELIVERY.

IT IS USED INTERNALLY WITHIN AN INSULIN DELIVERY DEVICE TO HOLD ESSENTIAL COMPONENTS IN PLACE.

IT IS SPECIFICALLY SHAPED WITH GROOVES AND CUTOUTS AND HOLES AND CANNOT BE USED IN ANY OTHER DEVICE.

IT IS BULK PACKED AND SHIPPED

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC MOULDS MEDICAL INSTRUMENTS MEDICAL EQUIPMENT PARTS