OF METAL.

ОТ МЕТАЛ 80 Z KOVU 473 AF METAL 17 AUS METALL 13694 ΑΠΟ ΜΕΤΑΛΛΟ 10 DE METAL 295 METALLIST 3 METALLISTA 51 DE MÉTAL 1736 OD KOVINA 2 FÉMBŐL 126 DI METALLO 273 IŠ METALO 4 NO METĀLA 43 VAN METAAL 770 Z METALU 309 DE METAL 3 DIN METAL 109 Z KOVU 239 IZ KOVINE 37 AV METALL 444

A DEVICE DESIGNED TO IMITIATE A GRENADE FOR…

A DEVICE DESIGNED TO IMITIATE A GRENADE FOR USE AS PART OF A SPORT CALLED "AIRSOFT".

THE DEVICE IS USED TO SIMULATE THE USE OF A FLASHBANG OR FRAGMENTATION GRENADE DURING GAME-PLAY, BY WAY OF CREATING A LOUD BANG NOISE.

THIS NOISE IS PRODUCED BY A .209INCH/6MM PRIMER CAP (SOLD SEPARATELY). WHEN DEPLOYED, PLAYERS ARE EXPECTED TO BE WEARING EYE AND EAR PROTECTION AS PART OF THE GAME, AT WHICH POINT THE DEVICE POSES LIMITED RISK OF HARM TO PLAYERS.

THE DEVICE IS VERY MUCH IDENTICAL TO THAT OF A CAP GUN ALBEIT SIMULATING A GRENADE, RATHER THAN A GUN.

THE DIMENSIONS ARE DIMENSIONS ARE 135MM TALL AND 45MM DIAMETER

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF METAL WEAPONS

A FOLDING HOOD DESIGNED FOR USE IN A TELEVISION…

A FOLDING HOOD DESIGNED FOR USE IN A TELEVISION STUDIO ENVIROMENT. THE HOOD IS FITTED OVER AUTO-CUE / TELEPROMPTERS TO ELIMINATE GLARE.THE HOOD IS MADE FROM RE-INFORCED NYLON.

THE REAR CLOTH IS MADE FROM COTTON AND THE SUPPORTS ARE MADE FROM ALUMINIUM. THE REAR OF THE HOOD IS BOLTED ONTO UPRIGHT SUPPORTS WHICH HAVE NUTS AT THE BOTTOM THAT SLIDE INTO SLOTS ON AN EXTRUDED METAL BAR.

THE EXTRUSION IS IN THE HORIZONTAL POSITION, THE HOOD IS THEREFORE AT 90 DEGREES TO THE EXTRUSION. .

THE TELEPROMPTER MONITOR IS ATTACHED TO THE SAME EXTRUSION AT THE HORIZONTAL POSITION. THERE IS A TITANIUM VACUUM COATED PIECE OF GLASS WHICH REFLECTS 70% OF THE IMAGE AND TRANSMITS 30%.

THIS IS CONSIDERED TO BE THE WORKING PART OF THE PRODUCT AND IS THEREFORE IS CLASSIFIED TO THIS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF GLASS REFLECTORS CAMERAS MONITORS

THIS PRODUCT IS AN OBJECTIVE LENS FOR A PHOTOGRAPHIC…

of plastic; of metal; of glass; lenses

THIS PRODUCT IS AN OBJECTIVE LENS FOR A PHOTOGRAPHIC CAMERA. THE LENS HAS A FOCAL LENGTH OF 85MM.

THIS PRODUCT CONSISTS OF METAL, GLASS AND PLASTIC. THE LENS HAS A FRONT DIAMETER OF 77MM AND AN OVERALL DIAMETER OF 82.8MM, WITH A LENGTH OF 96.1MM.

THE PRODUCT IS CONSTRUCTED OF 11 ELEMENTS IN 15 GROUPS. THE WEIGHT OF THE LENS IS 625G, WITH A MAXIMUM APERTURE OF F1.4.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF METAL OF GLASS LENSES

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED…

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED TO BE FITTED TO A TELEVISION CAMERA PEDESTAL. THE WHEELS ENABLE THE PEDESTAL TO BE MOVED QUICKLY WHEN REQUIRED IN OUTSIDE BROADCAST SETTINGS.

THE TYRES ARE MADE OF RUBBER AND THE WHEELS AND AXLES ARE MADE OF STEEL. THE PIVOT BLOCK/AXLE HOLDER IS MADE OF ALUMINIUM.

THE WHEELS ARE 6" IN DIAMETER AND APPROXIMATELY 6" WIDE WITHOUT THE CABLE GUARD.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL FOR PROFESSIONAL USE TELEVISION CAMERAS CAMERAS WHEELS

Non Threaded express Nails Used in connecting…

of metal; of steel; nails

Non Threaded express Nails Used in connecting timber to brick - these products are also called spring nails. Made from Steel

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL NAILS

THE PRODUCT IS A DESK TOP SCREEN DIVIDER.…

THE PRODUCT IS A DESK TOP SCREEN DIVIDER. ITS PURPOSE IS TO PROVIDE PROTECTION FOR ANYONE SITTING AT THEIR DESK POSITION, FROM OTHERS, IN CLOSE PROXIMITY TO THEM.

IT IS MANUFACTURED FROM A PVC SHEET/FACE SUPPORTED AND ENCLOSED IN AN ANODISED STEEL FRAME. IT IS MODULAR AND CAN BE USED ON ITS OWN BY APPLYING FEET TO A SINGLE SCREEN, OR BY ATTACHING MULTIPLE SCREENS TOGETHER, BY ATTACHING THEM TO JOINING PIECES.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF METAL WITH METAL FRAMES OF STEEL SCREENS

REMOTE CONTROL BATTERY TERMINAL SUB-ASSEMBLY.…

REMOTE CONTROL BATTERY TERMINAL SUB-ASSEMBLY. ABS MOULDING WITH STAINLESS STEEL TERMINALS. DIMENSION 43x 19 x12MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF METAL ELECTRIC

ELECTRICAL CABLE CLEATS MADE FROM STAINLESS…

ELECTRICAL CABLE CLEATS MADE FROM STAINLESS STEEL OUTER AND SOFT POLYERIC LINER INNER WITH FIXINGS, USED TO SUPPORT CABLES - SIZE RANGE 19-24 TO 160-215MM. THE CLEATS CONSIST OF SINGLE SHAPED STEEL BAND IN FORM OF A CLAMP, FASTENED TOGETHER WITH HEXAGON NUT AND BOLT.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL OF BASE METALS

SURFACE MOUNT KEYPAD FRONT, PART OF ALARM…

SURFACE MOUNT KEYPAD FRONT, PART OF ALARM PANEL, NICKEL PLATED STEEL, 175MM X 125MM X 30MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL PANELS

STEEL (12l14) BUSHING. ACTING AS A PLAIN…

STEEL (12l14) BUSHING. ACTING AS A PLAIN SHAFT BEARING. USED IN MOTOR VEHICLE ENGINE OIL SUMP. INSERTED INTO PLASTIC SUMP, A BOLT IS INSERTED THROUGH BUSHING TO END SECURING THE SUMP TO THE BOTTOM OF THE ENGINE. COLOUR SILVER. DIMENSIONS 13.6 X 13.6 X 12.4 MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL HOUSINGS MOTOR VEHICLE PARTS PLAIN SHAFT BEARINGS BEARING HOUSINGS