OF STEEL #11.

ОТ СТОМАНА 163 Z OCELI 1017 AF STÅL 48 AUS STAHL 14852 ΑΠΟ ΧΑΛΥΒΑ 34 DE ACERO 773 TERASEST 3 TERÄKSESTÄ 162 D'ACIER 1225 OD ČELIKA 12 ACÉLBÓL 171 DI ACCIAIO 411 IŠ PLIENO 19 NO TĒRAUDA 25 VAN STAAL 606 ZE STALI 1527 DE ACO 9 DIN OŢEL 77 Z OCELE 270 IZ JEKLA 39 AV STÅL 880

PISTON MADE OF STAINLESS STEEL FOR USE AS…

of steel; of stainless steel; valves

PISTON MADE OF STAINLESS STEEL FOR USE AS PART OF A VALVE THE PISTONS ARE PART OF THE MECHANISM FOR OPENING AND CLOSING THE VALVE.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL OF STAINLESS STEEL VALVES

SELF TAPPING MILD STEEL SPACE THREADED SCREW…

SELF TAPPING MILD STEEL SPACE THREADED SCREW PACKAGED FOR RETAIL SALE WITH A STEEL CAST ZINC ALLOY FINISH SELF DRILLING PLUG. THE PLUG IS USED AS AN ANCHOR IN THE PLASTERBOARD.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL SCREWS THREADED PLUGS THREADED ARTICLES SELF-TAPPING SCREWS

THIS PART IS CALLED AN INNER SHAFT. THIS…

THIS PART IS CALLED AN INNER SHAFT. THIS FORGED PART IS MADE FROM S55C LS CARBON STEEL. IT IS OF CIRCULAR CROSS SECTION.

THESE PARTS ULTIMATELY END UP BEING ASSEMBLED IN TO A 3RD GENERATION ANGULAR CONTACT FLANGED BEARING BUT MANY PROCESSES TO THESE PARTS ARE NEEDED TO MAKE THEM SUITABLE FOR ASSEMBLY INTO A BEARING.

THESE PARTS ARE SUBJECT TO THE FOLLOWING IN HOUSE PROCESSES BEFORE BEING USED AS PART OF A BEARING: TURNING, INDUCTION HEAT TREATMENT, TEMPERING, DRILLING, TAPPING, GRINDING INCLUDING THAT OF RACEWAY THEY CAN ONLY BECOME PART OF A BEARING AFTER THESE MANY MACHINING PROCESSES WHICH ADD THE RACEWAY AND DEFINE THEM AS A BEARING PART EXCLUSIVELY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL BEARING HOUSINGS FORGED

SEMI-FINISHED FORGED PART, MADE FROM S55C…

SEMI-FINISHED FORGED PART, MADE FROM S55C LS CARBON STEEL. IT IS OF CIRCULAR CROSS SECTION. THESE PARTS ULTIMATELY END UP BEING ASSEMBLED IN TO A 3RD GENERATION ANGULAR CONTACT FLANGED BEARING BUT MANY PROCESSES TO THESE PARTS ARE NEEDED TO MAKE THEM SUITABLE FOR ASSEMBLY INTO A BEARING.

THESE PARTS ARE SUBJECT TO THE FOLLOWING IN HOUSE PROCESSES BEFORE BEING USED AS PART OF A BEARING: TURNING, INDUCTION HEAT TREATMENT, TEMPERING, DRILLING, TAPPING, GRINDING.

THEY CAN ONLY BECOME PART OF A BEARING AFTER THESE MANY MACHINING PROCESSES WHICH ADD THE RACEWAY AND DEFINE THEM AS A BEARING PART EXCLUSIVELY

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL FORGED