PLASTICS.
A RECTANGULAR SHAPED RIGID LID. THE LID SITS…
A RECTANGULAR SHAPED RIGID LID. THE LID SITS ON A BASE AND IS USED TO HOLD MACAROONS. CARDBOARD IS MADE FROM NON-CORRUGATED PAPER OR PAPERBOARD.
PAPER RELATED MATERIALS: FULLY PRINTED 128G ARTPAPER AND 800G RIGID BOARD AND 350G FBB CARD.
PLASTIC RELATED MATERIALS: 0.25MM PET. TOTAL WEIGHT OF THE LID IS 34 GRAMS (PAPER BASED COMPONENTS (25 GRAMS) 74% AND PET (9 GRAMS) 26%).
DIMENSIONS OF THE LID ARE 200MM X 148MM(H) X 15MM.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
HARD SHELL CASE FOR MOBILE PHONE. WITH REAR…
HARD SHELL CASE FOR MOBILE PHONE. WITH REAR HALF POCKET. MATERIAL COMPOSITION 50% PLASTIC PC, 5% TPE, 43% PU, 2% METAL LOGO. THE CASE IS FORMED TO PROTECT THE SCREEN EDGES AND ALLOWS FULL ACCESS TO ALL FUNCTIONS ON THE PHONE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
POLYMER OF ETHYLENE - HIGH PERFORMANCE HFFR…
POLYMER OF ETHYLENE - HIGH PERFORMANCE HFFR COMPOUNDS USED FOR JACKETING/COVERING CABLES. THE HALOGEN FREE FLAME RETARDANT JACKETING COMPOUNDS OF THE HALGUARD 58000 SERIES EXHIBIT A HIGHER LEVEL OF FLAME RETARDANCE THAN OTHER HIGH-PERFORMANCE HFFR MATERIALS WITHOUT COMPROMISING PHYSICAL OR ELECTRICAL PROPERTIES.
THESE COMPOUNDS ARE IDEAL FOR DATA CENTER CABLES, CONTROL CABLES, ENERGY CABLES, AND OTHER DEMANDING APPLICATIONS WHERE LOW SMOKE GENERATION AND MINIMAL FLAME SPREAD ARE KEY.
HALOGEN-FREE, FLAME-RETARDANT PRODUCTS ENABLE CABLES TO MEET IEC AND NORTHERN AMERICAN SPECIFICATIONS FOR SMOKE GENERATION AND FLAME SPREAD.
HALGUARD COMPOUNDS CAN BE USED AS JACKET FOR CAT. 5E, 6, 6A,6+ DATA CABLES; RG, RG6 COAXIAL CABLES; TYPE SE, SEO, SEOW, SEOO, SEOOW FLEXIBLE CORDS; AND OPTICAL FIBER DISTRIBUTION AND BREAKOUT CABLES.
IN ADDITION TO THESE SPECIFIC APPLICATIONS, HALGUARD COMPOUNDS ARE USED AS INSULATION AND JACKETS IN A WIDE VARIETY OF CUSTOM CABLE DESIGNS.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
CIRCULAR SHAPED MOUSEPAD WITH A WRIST REST.…
CIRCULAR SHAPED MOUSEPAD WITH A WRIST REST. USED WITH MOUSE FOR a COMPUTER, WHERE THE WRIST REST GIVES SUPPORT UNDERNEATH THE WRIST WHEN USING THE MOUSE. IT CONSISTS OF 98% POLYURETHANE AND 2% LYCRA. SOLD IN RETAIL OUTLETS IN A BLISTER PACK WITH A PRINTED INSERT CARD. 25CM IN DIAMETER.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
WRIST REST TO BE PLACED IN FRONT OF THE COMPUTER…
WRIST REST TO BE PLACED IN FRONT OF THE COMPUTER KEYBOARD. 45CM LONG / 5CM WIDE. CONSISTS OF 80% PU GEL ON THE INSIDE AND POLYESTER FABRIC 20% PACKAGED IN A BLISTER PACK WITH COLOUT INSERT CARD AND SOLD ONLINE OR THROUGH RETAIL OUTLETS
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
PLASTIC SUPPORT FOR A COMPONENT ON A PRINTED…
PLASTIC SUPPORT FOR A COMPONENT ON A PRINTED CIRCUIT BOARD (PCB). IT SUPPORTS COMPONENTS ON A PCB AND STOPS THEM FALLING OVER WHICH WOULD PREVENT THE PCB FROM OPERATING AS IT SHOULD IT IS CLIPPED ON TO THE COMPONENTS. IT IS MADE FROM POLYAMIDE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A PVC LEPRECHAUN ORNAMENT WITH A SMALL SOLAR…
A PVC LEPRECHAUN ORNAMENT WITH A SMALL SOLAR PANEL THE LEPRECHAUN IS SET IN MOTION BY THE ENERGY OF THE INTEGRATED SOLAR MODULE BASE. MADE OF PVC. 10 CM APPROXIMATELY IN HEIGHT.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
UNIQUE PHONE CLASSIC FOLIO WALLET 2 IN 1…
UNIQUE PHONE CLASSIC FOLIO WALLET 2 IN 1 MAGNETIC HARD SHELL BLACK. MATERIAL COMPOSITION GENUINE COW LEATHER-65% FABRIC LINING MATERIAL - 5% PLASTIC - 12% PU MATERIAL FOR FLAP - 3% INNER CARD BOARD - 9% METAL LOGO - 1% MAGNET - 5% USAGE: CASE PHONE FUNCTIONS "PREMIUM LUXURY GENUINE COW LEATHER " 2 IN 1 DETACHABLE MAGNETIC BLACK CASE DESIGN.
CONVENIENT TAB CLOSURE. MULTIPLE CARD STORAGE (3X SLOTS) BACK CASE CARD STORAGE (1 SLOT) FORMED PROTECTIVE CASE EDGES
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
TRAVEL MUG WITH LID. THE MUG IS MADE FROM…
TRAVEL MUG WITH LID. THE MUG IS MADE FROM A COMBINATION OF BAMBOO FIBRES AND PLASTIC RESINS. MUG IS WITHOUT HANDLE.
THE CONICAL SHAPED MUG IS BLACK AND CREAM IN COLOUR (PATTERED DESIGN) WITH A PLAIN BLACK COLOURED PLASTIC LID.
THE FLEXIBLE PLASTIC LID HAS A HOLE FOR DRINKING THE LIQUID THROUGH. THE APPROXIMATE MEASUREMENTS OF THE MUG ARE 13 CMS (HEIGHT), TOP DIAMETER 8.5 CMS AND BASE DIAMETER 5 CMS.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
SCULPTURE OF A PANDA'S FACE. FOR ORNAMENTAL…
SCULPTURE OF A PANDA'S FACE. FOR ORNAMENTAL USE. SCULPTURE HAS 'OPEN FORM' DESIGN TO ALLOW LIGHT TO PASS THROUGH IT.
MADE FROM MARBLE STONE POWDER, POLY RESIN, DYE, CATALYST AND ACRYLIC PAINT. SCULPTURE IS 26 CMS IN HEIGHT AND 24 CMS WIDE.
THE SCULPTURE HAS A CELLOPHANE COVERING AND IS THEN PACKAGED IN EXPANDED POLYSTYRENE IN A CARDBOARD BOX READY FOR RETAIL SALE.
MODEL NUMBER AND PICTURE OF THE SCULPTURE IS ON THE SIDE AND TOP OF THE BOX. PRINTED BOOKLET SHOWING OTHER SCULPTURES AND COMPANY DETAILS.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .