SECTIONS.
ПРОФИЛИ 3 PROFILY 171 TEIL 21800 SECCION 1 LOHKO 11 PROFILES 7 PROFILOK 3 PROFILATI-SEZIONI 18 AFDELINGEN 1 PRZEKROJE 1 SECCAO 4 SECŢIUNE 2 PROFILY 73VACUUM CLEANER EQUIPMENT - VACMASTER STAINLESS…
VACUUM CLEANER EQUIPMENT - VACMASTER STAINLESS STEEL EXTENSION TUBES 32MM. REPLACEMENT EXTENSION TUBES FOR VACMASTER COMMERCIAL VACUUM CLEANERS WITH 32MM HOSES.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
VACUUM EQUIPMENT - VACMASTER DUAL MODE FLOOR…
VACUUM EQUIPMENT - VACMASTER DUAL MODE FLOOR HEAD 32MM. QUICKLY CONVERTS FROM HARD-FLOOR MODE TO CARPET MODE AT A FLICK OF A SWITCH LOCATED ON THE HEAD OF THE NOZZLE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A PLASTIC 32MM CREVICE TOOL DESIGNED FOR…
A PLASTIC 32MM CREVICE TOOL DESIGNED FOR VACUUM CLEANERS WITH 32MM HOSES.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A MILD STEEL METAL INSERT USED TO STRENGTHEN…
A MILD STEEL METAL INSERT USED TO STRENGTHEN THE FRONT WINDOW ASSEMBLY ON A MOTOR VEHICLE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
INKJET PRINTHEAD FOR USE IN HIGH CAPACITY…
INKJET PRINTHEAD FOR USE IN HIGH CAPACITY PRINTING APPLICATIONS SUCH AS LABEL PRINTING USING AN ULTRA VIIOLET INK.
FOUR INCH WIDE PRINT HEAD CONTAINS MORE THAN 2500 JETTING ELEMENTS TO PROVIDE A RESOLUTION OF BETWEEN 150 DPI AND 1200 DPI.
THE PRINT HEAD WORKS BY PIEZO ELECTRIC VIBRATION OF THE RELEVANT NOZZLES WHICH CAUSES A DROP OF INK TO BE RELEASED.
THE PRINT HEAD IS MECHANICALLY ALIGNED WITH THE PRINTER AND SCREWED INTO POSITION. THE PRINTING FACE IS MADE FROM STAINLESS STEEL, WITH A METAL FRAME HOUSING A NUMBER OF CIRCUIT BOARDS REQUIRED FOR OPERATION OF THE PRINT HEAD.
TWO PLASTIC TUBES ARE ATTACHED; ONE IS TO SUPPLY THE INK OTHER FOR CLEANING PURPOSES.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
INKJET PRINTHEAD FOR USE IN HIGH CAPACITY…
INKJET PRINTHEAD FOR USE IN HIGH CAPACITY PRINTING APPLICATIONS SUCH AS TEXTILE PRINTING USING A WATER BASED INK.
FOUR INCH WIDE PRINT HEAD CONTAINS MORE THAN 2500 JETTING ELEMENTS TO PROVIDE A RESOLUTION OF BETWEEN 150 DPI & 1200 DPI.
THE PRINT HEAD WORKS BY PIEZO ELECTRIC VIBRATION OF THE RELEVANT NOZZLES WHICH CAUSES A DROP OF INK TO BE RELEASED.
THE PRINT HEAD IS MECHANICALLY ALIGNED WITH THE PRINTER AND SCREWED INTO POSITION. THE PRINTING FACE IS MADE FROM STAINLESS STEEL, WITH A METAL FRAME HOUSING A NUMBER OF CIRCUIT BOARDS REQUIRED FOR OPERATION OF THE PRINT HEAD.
TWO PLASTIC TUBES ARE ATTACHED; ONE IS TO SUPPLY THE INK OTHER FOR CLEANING PURPOSES.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A PACK OF 5 REPLACEMENT COILS FOR AN E-CIGARETTE.…
A PACK OF 5 REPLACEMENT COILS FOR AN E-CIGARETTE. THE COIL SCREWS INTO THE BASE OF THE CLEAROMIZER TANK. THE COILS ARE PACKAGED IN A CARBOARD SLEEVE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A REPLACEMENT ATOMISER FOR AN E-CIGARETTE.…
A REPLACEMENT ATOMISER FOR AN E-CIGARETTE. IT IS MADE OF STEEL AND GLASS. THE ATOMISER IS PACKAGED IN A CARDBOARD BOX.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A LITHIUM-ION REPLACEMENT RECHARGABLE BATTERY…
A LITHIUM-ION REPLACEMENT RECHARGABLE BATTERY IN A STEEL HOUSING. THE BATTERY CANNOT BE REMOVED FROM THE HOUSING. IT IS FOR USE ON AN E-CIGARETTE. IT IS SCREWED ONTO THE BOTTOM OF THE CLEAROMIZER ON THE E-CIGARETTE. THE REPLACEMENT BATTERY IS PACKAGED IN A CARDBOARD BOX.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .
A BODY MADE OUT OF PRESSED STEEL. THE BODY…
A BODY MADE OUT OF PRESSED STEEL. THE BODY IS ASSEMBLED INTO A TURBO CHARGER ACTUATOR. THE ACTUATOR CONTROLS A VALVE ON A TURBO CHARGER WHICH IN TURN CONTROLS THE SPEED OF THE TURBO CHARGER. IT IS ATTACHED TO AN AUTOMOTIVE ENGINE.
- Nomenclature code:
- Nomenclature code.
- Start date of validity:
- .