THERMOPLASTIC.

TERMOPLASTICKÉ 13 TERMOPLASTISK 1 THERMOPLASTISCH 29 TERMOPLASTICO 1 THERMOPLASTIQUE 46 TERMOPLASTIČNI 1 TERMOPLASTICO 4 THERMOPLASTISCH 21 TERMOPLASTYCZNY 7 TERMOPLASTICE 2 TERMOPLASTICKÝ 4 TERMOPLASTIČEN 3 TERMOPLASTISK 14

AN INJECTION MOULDED WASHER MADE FROM THERMOPLASTIC…

moulded; washers; thermoplastic

AN INJECTION MOULDED WASHER MADE FROM THERMOPLASTIC POLYURETHANE

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MOULDED WASHERS THERMOPLASTIC

A CONNECTOR WHICH MOUNTS DIRECTLY ON TO THE…

for printed circuits; connectors; mounted; thermoplastic

A CONNECTOR WHICH MOUNTS DIRECTLY ON TO THE PCB AND ALLOWS THE VERTICAL CONNECTION BETWEEN ONE BOARD AND ANOTHER.

IT IS USED FOR CONNECTING TWO PCBS AND CONNECTS DIRECTLY TO THE BOARD. IT ALLOWS SIGNALS TO BE SENT BETWEEN THE PCBS.

IT IS MANUFACTURED FROM THERMOPLASTIC MOULDING WITH INTEGRATED CONTACTS. THE CONNECTOR IS TO BE MOUNTED ON THE PCB USING SOLDER.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: FOR PRINTED CIRCUITS CONNECTORS MOUNTED THERMOPLASTIC

A DIRECTLY CONNECTED PCB CONNECTOR WHICH…

A DIRECTLY CONNECTED PCB CONNECTOR WHICH CREATES A VERTICAL CONNECTION BETWEEN ONE BOARD AND ANOTHER.

IT IS USED FOR CONNECTING TWO PCBS AND IS CONNECTED DIRECTLY TO THE BOARD. IT ALLOWS SIGNALS TO BE SENT BETWEEN THE PCBS.

IT IS MANUFACTURED FROM THERMOPLASTIC MOULDING WITH INTEGRATED CONNECTORS. THE CONNECTOR IS TO BE MOUNTED ON THE PCB USING SOLDER.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: ELECTRONIC FOR PRINTED CIRCUITS CONNECTIONS THERMOPLASTIC

PAPER COMPOSITE SHEET A RAW PAPER COMPOSITE…

PAPER COMPOSITE SHEET A RAW PAPER COMPOSITE SURFACE MATERIAL. IN SHEETS. IT IS A DURABLE PRODUCT THAT IS USED IN VARIOUS PRODUCTS SUCH AS RESIDENTIAL KITCHEN WORK TOPS TO INDUSTRIAL PROJECTS INCLUDING BUILDINGS.

IT IS WATERPROOF AND HEAT RESISTANT. IMPORTED IN SHEETS. A STACK OF RESIN SATURATED PAPER IS PUT INTO A PRESS, THEN PUT THROUGH A HOT CYCLE AND PRESSURE AND FINALLY A COLD CYCLE STILL UNDER PRESSURE TO ENSURE THE SHEET DOES NOT WARP.

NO ADHESIVE OR GLUE IS USED. PRODUCT IS PRESSED IN THICKNESSES RANGING FROM 6MM TO 75MM, PANEL SIZES RANGE BETWEEN 2440MM X 1220MM AND 3660MM X 1525MM

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: PAPER WITH PLASTIC REINFORCED THERMOPLASTIC

3/8" BORE PLASTIC HOSES WITH FITTINGS.…

3/8" BORE PLASTIC HOSES WITH FITTINGS. THE HOSE MATERIAL IS MAINLY COMPOSED OF NYLON, THIS HAS AN OUTER SHEATH OF POLYURETHANE EXTRUDED OVER THE HOSE.

THE HOSES ARE REINFORCED WITH A FLEXIBLE STAINLESS STEEL TUBE AND AN ARAMID BRAID. THE HOSES ARE FLEXIBLE WITH A WORKING PRESSURE OF 500 PSI (34.47 MPA).

THE HOSES ARE TERMINATED AT EACH END TO A TUBE WITHIN AN OUTBOARD STABPLATE THAT CAN BE ATTACHED TO BETWEEN 2 AND 13 HOSES.

THE STABPLATES ARE MADE FROM PREDOMINANTLY STAINLESS STEEL WITH SOME PLASTIC AND COPPER NICKEL COMPONENTS.

THE PRODUCT IS USED TO PROVIDE FLUID DISTRIBUTION BETWEEN EQUIPMENT WITHIN A SUBSEA PRODUCTION SYSTEM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF NYLON WITH METAL REINFORCED HOSES DISTRIBUTORS HYDRAULIC THERMOPLASTIC

3/8" BORE PLASTIC HOSES WITH FITTINGS.…

3/8" BORE PLASTIC HOSES WITH FITTINGS. THE HOSE MATERIAL IS MAINLY COMPOSED OF NYLON, THIS HAS AN OUTER SHEATH OF POLYURETHANE EXTRUDED OVER THE HOSE.

THE HOSES ARE REINFORCED WITH AN ARAMID BRAID. THE HOSES ARE FLEXIBLE WITH A WORKING PRESSURE OF 500 PSI (34.47 MPA).

THE HOSES ARE TERMINATED AT EACH END TO A TUBE WITHIN AN OUTBOARD STABPLATE THAT CAN BE ATTACHED TO BETWEEN 2 AND 13 HOSES.

THE STABPLATES ARE MADE FROM PREDOMINANTLY STAINLESS STEEL WITH SOME PLASTIC AND COPPER NICKEL COMPONENTS.

THE PRODUCT IS USED TO PROVIDE FLUID DISTRIBUTION BETWEEN EQUIPMENT WITHIN A SUBSEA PRODUCTION SYSTEM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF NYLON REINFORCED HOSES DISTRIBUTORS HYDRAULIC THERMOPLASTIC

3/8" BORE PLASTIC HOSES WITH FITTINGS.…

3/8" BORE PLASTIC HOSES WITH FITTINGS. THE HOSE MATERIAL IS MAINLY COMPOSED OF NYLON, THIS HAS AN OUTER SHEATH OF POLYURETHANE EXTRUDED OVER THE HOSE.

THE HOSES ARE REINFORCED WITH A STEEL WIRE. THE HOSES ARE FLEXIBLE WITH A WORKING PRESSURE OF 500 PSI (34.47 MPA).

THE HOSES ARE TERMINATED AT EACH END TO TUBES WITHIN AN OUTBOARD STABPLATE THAT CAN BE ATTACHED TO BETWEEN 2 AND 13 HOSES.

THE STABPLATES ARE MADE FROM PREDOMINANTLY STAINLESS STEEL WITH SOME PLASTIC AND COPPER NICKEL COMPONENTS.

THE PRODUCT IS USED TO PROVIDE FLUID DISTRIBUTION BETWEEN EQUIPMENT WITHIN A SUBSEA PRODUCTION SYSTEM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF NYLON WITH METAL REINFORCED HOSES DISTRIBUTORS HYDRAULIC THERMOPLASTIC

A WOVEN MATERIAL OF YARN MADE FROM STAPLE…

A WOVEN MATERIAL OF YARN MADE FROM STAPLE FIBRES OF POLYACRYLONITRIL (PAN) WHOSE FIBRES HAVE BEEN STABILISED AND THEN OXIDISED AT A TEMPERATURE OF BETWEEN 250-350 DEGREES CELSIUS FOR BETWEEN 4-6 HOURS.

THE PRODUCT IS USED TO ABSORB FRICTION IN AUTOMOTIVE TRANSMISSIONS, TORQUE CONVERTERS AND DUAL CLUTCHES AS IT CAN WITHSTAND EXTREMELY HIGH TEMPERATURES COLOUR: BLACK PRODUCT IS SOLD IN ROLLS

BTI Reference:
GBBTI504567060.
Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF SYNTHETIC FIBRE WOVEN THERMOPLASTIC

BLUE PLASTIC LETTERS, USED AS CHARMS TO PERSONALISE…

BLUE PLASTIC LETTERS, USED AS CHARMS TO PERSONALISE A MOBILE PHONE CASE. THE LETTERS ARE MADE FROM THERMOPLASTIC POLYUREHTANE.

THERE ARE CUT OUT SLOTS ON THE BACK OF EACH LETTER. THIS ENABLES THE LETTERS TO BE ANCHORED ONTO A FIXED PIECE OF PLASTIC, WHICH FORMS PART OF THE DESIGN OF THE MOBILE PHONE CASE

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF POLYURETHANE THERMOPLASTIC