WELDED.

ЗАВАРЕН, СПОЕН 13 SVAŘOVANÉ 36 SVEJSET 7 GESCHWEISST 290 ΣΥΓΚΟΛΛΗΜΕΝΟΣ ΕΝ ΘΕΡΜΩ 3 SOLDADO 8 KEEVITATUD 2 HITSATTU 31 SOUDÉ 65 ZAVAREN 1 HEGESZTETT 2 SALDATO 7 SUVIRINTI 30 METINĀTS 2 GELAST 27 SPAWANY 5 SUDAT 31 ZVÁRANÝ 12 VARJEN 9 SVETSAD 39

PRECISION TUBES, NOT FURTHER WORKED THAN…

PRECISION TUBES, NOT FURTHER WORKED THAN CALIBRATED, DECLARED BY THE APPLICANT AS MEETING THE REQUIREMENTS OF ISO STANDARD 3306 WITH A WALL THICKNESS NOT EXCEEDING 2MM.

THE TUBES ARE 3.75 METRE HOLLOW TUBE/PIPE OF CARBON STEEL. THE PRODUCT IS COLD ROLLED, WELDED WITH SEAM AND WITHOUT INSULATION.

THE TUBE/PIPE HAS CIRCULAR CROSS-SECTIONS AND IS USED AS A SLEEVE TO ROUTE AND PROTECT ELECTRICAL CABLES.

THE WALL THICKNESS IS 1.6MM. THE TUBE IS THREADED ON BOTH ENDS AND COMES WITH ONE COUPLER ATTACHED WHICH ALLOWS OTHER LENGTHS OF TUBE TO BE ATTACHED WHEN NECESSARY.

A PLASTIC CAP IS ATTACHED TO THE OTHER END FOR PROTECTION DURING TRANSPORT. THE LENGTH OF THE THREAD IS A MINIMUM 13MM AND A MAXIMUM OF 15MM AND IT HAS AN EXTERNAL DIAMETER OF EITHER 20MM OR 25MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL HOLLOW THREADED FOR PROTECTION WELDED WITH SEAM

THIS IS A FABRICATED HOT ROLLED STEEL ASSEMBLY…

THIS IS A FABRICATED HOT ROLLED STEEL ASSEMBLY READY FOR USE AS PART OF A STRUCTURE. THE ASSEMBLY IS EXPORTED UNASSEMBLED. IT CONSISTS OF STEEL FLATS/PLATES, BARS, RODS, COLUMNS AND BEAMS WHICH HAVE BEEN SHAPED, DRILLED, WELDED, FABRICATED AND IS READY FOR ERECTION IN A CONSTRUCTION.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: FOR CONSTRUCTION OF STEEL STRUCTURES OF METAL PAINTED WELDED

A STAIRLIFT RAIL MADE UP OF RAILS CONSTRUCTED…

A STAIRLIFT RAIL MADE UP OF RAILS CONSTRUCTED FROM TUBULAR STEEL , SPECIFICALLY DESIGNED , SHAPED AND CHAMFERED TO FIT A STAIRLIFT SYSTEM.

THE ENDS OF EACH RAIL ARE MACHINED IN SUCH A WAY, TO ALLOW FOR MORE THAN ONE RAIL TO BE JOINED TO ANOTHER AND TO ALLOW THE CARRIAGE TO TRAVEL ON THE RAIL WITHOUT IMPEDIMENT.

THE RAIL IS SPECIFIC TO THIS APPLICATION AND UNSUITABLE FOR OTHER USES. THE MATERIAL IS COLD FINISHED AND WELDED.

THE OUTSIDE DIAMETER IS APPROXIMATELY 44.45MM, INSIDE DIAMETER APPROXIMATELY 36.33MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL TUBES RAILS SHAPED WELDED

DELIVERY WIRE ONLY USED BY MEDICAL PROFESSIONALS…

DELIVERY WIRE ONLY USED BY MEDICAL PROFESSIONALS TO IMPLANT NEUROVASCULAR COILS DURING BRAIN SURGERY.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: MEDICAL EQUIPMENT COILS STAINLESS STEELS PLATINUM WELDED

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

sections; of steel; hollow; tubes; welded; non-alloy steel

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A NON-CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH A WALL THICKNESS NOT EXCEEDING 2MM, MAXIMUM CROSS SECTION DIMENSION 40X40CM, LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: SECTIONS OF STEEL HOLLOW TUBES WELDED NON-ALLOY STEEL

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A NON-CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH A WALL THICKNESS EXCEEDING 2MM, MAXIMUM CROSS SECTION DIMENSION 40X40CM, LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: SECTIONS OF STEEL HOLLOW TUBES WELDED NON-ALLOY STEEL

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

tubes; welded; non-alloy steel; with circular cross-section;…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH OUTER DIAMETER OF NOT MORE THAN 168,3 MM, MAXIMUM LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES WELDED NON-ALLOY STEEL WITH CIRCULAR CROSS-SECTION MISCELLANEOUS ITEMS

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH OUTER DIAMETER OF EXCEEDING 168,3 MM BUT NOT EXCEEDING 406.4MM, MAXIMUM LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES WELDED NON-ALLOY STEEL WITH CIRCULAR CROSS-SECTION MISCELLANEOUS ITEMS

STEEL CONDUCTOR PIPE. USED TO CREATE OIL…

STEEL CONDUCTOR PIPE. USED TO CREATE OIL PIPELINES. 30 INCH OUTER DIAMETER X 1.5 INCH WT X 39FT (+/- 1FT). SUBMERGED ARC WELDED. MADE OF STEEL. PRODUCED TO API 5L (45TH EDITION) GR.X56M PSL. FITTED WITH STEEL PIN AND BOX CONNECTORS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL TUBES PIPES AND TUBES WELDED MISCELLANEOUS ITEMS

A HYPOTUBE MANUFACTURED FROM AISI 300 OR…

tubes; of stainless steel; cold formed; for medical use; pipes…

A HYPOTUBE MANUFACTURED FROM AISI 300 OR 400 SERIES STAINLESS STEEL FOR MEDICAL PURPOSES. IT IS WELDED AND REDRAWN, COLD WORKED AND OR SEAMLESS.

IT IS MADE FROM FLAT STRIP WHICH IS FORMED AND WELDED INTO TUBULAR SECTIONS OF 1.2MM IN DIAMETER.

IT IS THEN PLUG DRAWN ON A PURPOSE BUILT DRAWING BENCH IN ORDER TO SET THE TUBES WALL THICKNESS.

IT IS FURTHER WORKED BY ANNEALING AND FURTHER DRAWN TO SIZE

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES OF STAINLESS STEEL COLD FORMED FOR MEDICAL USE PIPES AND TUBES COLD ROLLED WELDED