Other / Check (non-return) valves.

PFA (PLASTIC) LINED CHECK VALVES. THESE ARE…

PFA (PLASTIC) LINED CHECK VALVES. THESE ARE DESIGNED TO PREVENT BACKFLOW THROUGH PIPELINE OR AS A SIMPLE SAFETY VALVE OPENING WHEN A CERTAIN PRESSURE HAS BEEN REACHED. THESE ARE AGAIN LINED IN PFA ARE CHOSEN AGAIN BECAUSE OF THEIR CHEMICAL RESISTANCE AND HIGH PURITY.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECK (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HSEN CHAPTER 84 HEADING 8481 ECJ C-199/09-SCHENKER

BTI Reference:
GBBTI503559162.
Start date of validity:
.
End date of validity:
2020-11-06.

National keywords: OF PLASTIC VALVES CHECK VALVES NEW PIPES AND TUBES

SHEATH ASSEMBLY - THE MATERIAL IS IMPORTED…

SHEATH ASSEMBLY - THE MATERIAL IS IMPORTED AS ONE COMPLETE COMPONENT. THE LARGER HARD PLASTIC TOP ON THE END OF THE SHEATH TUBE CONTAINS A CAP, VALVE AND STRAIN RELIEF.

THE SMALLER HARD PLASTIC TOP ON THE END OF THE SHEATH TUBE CONTAINS A DILATOR. THE COMPONENT IS A PART OF A VESSEL CLOSURE DEVICE FOR MEDICAL PURPOSES.

THE VALVE IN THE COMPONENT PREVENTS BLOOD FLOW THROUGH THE SHEATH AFTER THE DEVICE HAS BEEN INSERTED INTO THE BODY.

Classification justification: GENERAL RULES 1, 3B AND 6 FOR THE INTERPRETATION OF THE COMBINED NOMENCLATURE. THE TEXT TO TARIC CODES 8481, 8481 30, 8481 30 99 AND 8481 30 99 90. CHAPTER NOTE 1 (G) TO CHAPTER 90. THE HARMONISED SYSTEM EXPLANATORY NOTES TO HEADING 8481.

BTI Reference:
IE15NT-14-2868.
Start date of validity:
.
End date of validity:
2020-03-09.

National keywords: OF PLASTIC TUBES VALVES CHECK VALVES FOR MEDICAL USE WITH CONNECTORS

AN AUTONOMOUS INFLOW CONTROL DEVICE. IT IS…

AN AUTONOMOUS INFLOW CONTROL DEVICE. IT IS A CHECK NON RETURN VALVE FOR USE IN THE GAS AND OIL INDUSTRIES. MADE FROM TUNGSTEN CARBIDE. THE VALVE IS USED TO OPTIMISE PRODUCTION OF OIL, LIMITING WATER AND GAS.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECK (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HSEN CHAPTER 84 HEADING 8481

BTI Reference:
GB502754761.
Start date of validity:
.
End date of validity:
2022-01-07.

National keywords: OF METAL VALVES CHECK VALVES

SOLENOID VALVE USED FOR CONTROLLING POTABLE…

SOLENOID VALVE USED FOR CONTROLLING POTABLE WATER. CAN BE CONNECTED TO 12MM PLUMBING. 12V DC. IT IS A CHECK VALVE

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECH (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT

BTI Reference:
GB501916865.
Start date of validity:
.
End date of validity:
2020-06-18.

National keywords: CHECK VALVES

A ONE WAY DRAIN VALVE ASSY, FOR USE WITHIN…

A ONE WAY DRAIN VALVE ASSY, FOR USE WITHIN AN AUTOMOTIVE VEHICLE. IT IS A PLASTIC PART, WITH A SMALL RUBBER FLAP. ITS PURPOSE IS TO DRAIN WATER FROM A LUGGAGE COMPARTMENT IN A VEHICLE.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S: GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 - TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES.

GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 - CHECK (NON-RETURN) VALVES.

CN CODE 848130 99 - OTHER. TARIC CODE 84813099 90 - OTHER. ALSO CLASSIFIED IN ACCORDANCE WITH: NOTE 2 (a) TO SECTION XVI REFERS.

NOTE (3) TO THE HSEN'S OF HEADING 8481 REFERS.

BTI Reference:
GB501809375.
Start date of validity:
.
End date of validity:
2020-04-09.

National keywords: VALVES NEW

A BRASS AND PLASTIC OUTLET AND RETURN VALVE…

A BRASS AND PLASTIC OUTLET AND RETURN VALVE USED TO TRANSPORT WATER AROUND DIE WHEN DIE CASTING TO COOL THE DIE DOWN. THE DIE MOULDS MOLTEN METAL INTO RAW CASTING ALUMINIUM PARTS.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECH (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT

BTI Reference:
GB123106916.
Start date of validity:
.
End date of validity:
2019-09-22.

National keywords: OF PLASTIC OF BRASS CHECK VALVES

THE PRODUCT IS A 1/2" NPT (NATIONAL…

THE PRODUCT IS A 1/2" NPT (NATIONAL PIPE THREAD) CHECK VALVE, MADE OF 316 STAINLESS STEEL. A CHECK (NON-RETURN) VALVE DESIGNED FOR HIGH FLOW AND LOW PRESSURE DROP IN A PRESSURISED MEDIUM. A SOFT PRIMARY SEAT MEANS IT IS SUITABLE FOR GASES OR LIQUIDS.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECH (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HSEN CHAPTER 84 HEADING 8481

BTI Reference:
GB501600707.
Start date of validity:
.
End date of validity:
2019-09-16.

National keywords: OF METAL OF STAINLESS STEEL VALVES CHECK VALVES

A CHECK VALVE WHICH IS USED TO INSURE THAT…

A CHECK VALVE WHICH IS USED TO INSURE THAT WATER CAN ONLY FLOW IN ONE DIRECTION. MADE OF PLASTIC 20MM, 25MM, 32MM, 50MM

Classification justification: GIR 1 & 6 TEXT OF HEADING 8481 SUBHEADING 848130

BTI Reference:
IE13NT-14-1261-05.
Start date of validity:
.
End date of validity:
2019-06-16.

National keywords: OF PLASTIC WATER

PLASTIC BOTTLE CAP THAT INCORPORATES A NON-RETURN…

PLASTIC BOTTLE CAP THAT INCORPORATES A NON-RETURN VALVE. THE CAP IS USED TO FIT A PET BOTTLE. WHEN A BOTTLE IS FILLED WITH A SOFT DRINK AND CARBONATED BY A DRINKS CARBONATOR, (CLASSIFIED SEPARATELY), THE CAP IS PLACED ON THE BOTTLE AND THE CARBONATOR RE-CARBONATES THE DRINK DIRECTLY VIA THE CAP NOZZLE.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 848130 CHECH (NONRETURN) VALVES CN CODE 84813099 OTHER THAN OF IRON OR STEEL TARIC CODE 8481309990 OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH HSEN CHAPTER 84 HEADING 8481

BTI Reference:
GB122802115.
Start date of validity:
.
End date of validity:
2019-04-23.

National keywords: OF PLASTIC VALVES

SELF FILL TUBING TESTER VALVE, PART OF A…

SELF FILL TUBING TESTER VALVE, PART OF A DRILL STEM TESTING LINE. THE FLAPPER VALVE IN THE TOOL WILL ONLY SUPPORT PRESSURE FROM ABOVE THEREBY ALLOWING COMPLETION FLUID TO ENTER THE TEST STRING VIA THE BYPASS.

THE BASIC FUNCTIONS ARE TO ALLOW FLUID FILL OF THE TOOL STRING DURING ENTRY AND TO PROVIDE A METHOD OF PRESSURE TESTING TUBULARS WHILE RUNNING IN THE HOLE.

THE VALVE IS HINGED ON ONE SIDE, ONLY MOVING IN ONE DIRECTION. THE VALVE IS MADE FROM STEEL. TOOL LENGTH 1879 MM.

TOOL WEIGHT 260 KG. WHEN REQUIRED THE SFTTV CAN BE FIRED OPEN BY APPLIED ANNULUS PRESSURE OF ABOUT 500 psi.

Classification justification: CLASSIFICATION HAS BEEN DETERMINED IN ACCORDANCE WITH THE FOLLOWING:- GENERAL INTERPRETATIVE RULES (GIR)S GIR 1 HAS BEEN USED TO CLASSIFY THIS PRODUCT BY THE TERMS OF HEADING 8481 FOR TAPS, COCKS, VALVES AND SIMILAR APPLIANCES FOR PIPES, BOILER SHELLS, TANKS, VATS OR THE LIKE, INCLUDING PRESSURE-REDUCING VALVES AND THERMOSTATICALLY CONTROLLED VALVES GIR 6 HAS BEEN USED TO CLASSIFY THE GOODS TO SUBHEADING LEVEL 8481 30 FOR CHECK (NON-RETURN) VALVES CN CODE 848130 99 FOR OTHER THAN OF CAST IRON OR STEEL TARIC 84813099 90 FOR OTHER THAN FOR USE IN CERTAIN TYPES OF AIRCRAFT ALSO CLASSIFIED IN ACCORDANCE WITH:- HARMONISED SYSTEM EXPLANATORY NOTES (HSEN) TO HEADING 8481

BTI Reference:
GB122436013.
Start date of validity:
.
End date of validity:
2019-02-25.

National keywords: OF STEEL VALVES CHECK VALVES