Other / Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof.

Deutsch 21 Français 8 Italiano 1 Polski 4 Slovenčina 1 Svenska 2

  • - - - - - - 8708509910 80: Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of  1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
  • - - - - - - 8708509930 80: Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm)  x 213 mm (± 1 mm) x 273 mm (± 1 mm)  comprising at least: - two electro-magnetic one direction clutches in one cage, working in both directions, - an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22, - a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth for use in the manufacture of all-terrain or utility task vehicles
  • - - - - - - 8708509990 80 (0/6) : Other

A PART OF A MOTOR VEHICLE AXLE. MANUFACTURED…

sections; tubes; for motor vehicles; non-alloy steel

A PART OF A MOTOR VEHICLE AXLE. MANUFACTURED FROM A HIGH-CARBON NON-ALLOY STEEL ELECTRIC RESISTANCE WELDED, DRAWN OVER MANDREL TUBING MACHINED AND SWAGED TO A SPECIFIC CUSTOMER DRAWING, WITH PRECISE TOLERANCES AND DIMENSIONS FOR THE MANUFACTURE OF AXLES FOR A SPECIFIC VEHICLE MODEL.

MEASUREMENTS 528.9 MM IN LENGTH, WITH A DIAMETER OF BETWEEN 101.6 MM (AT ONE END) AND 101.74 MM (AT THE OTHER END)

Start date of validity:
.

National keywords: SECTIONS TUBES FOR MOTOR VEHICLES NON-ALLOY STEEL

A PART OF A MOTOR VEHICLE AXLE. MANUFACTURED…

sections; tubes; for motor vehicles; non-alloy steel

A PART OF A MOTOR VEHICLE AXLE. MANUFACTURED FROM A HIGH-CARBON NON-ALLOY STEEL. ELECTRIC RESISTANCE WELDED, DRAWN OVER MANDREL TUBING, PROCESSED TO A SPECIFIC CUSTOMER DRAWING, WITH PRECISE TOLERANCES AND DIMENSIONS FOR THE MANUFACTURE OF AXLES FOR A SPECIFIC VEHICLE MODEL.

MEASURES 687 MM AND 80MM IN DIAMETER.

Start date of validity:
.

National keywords: SECTIONS TUBES FOR MOTOR VEHICLES NON-ALLOY STEEL

WHEEL HUB ASSEMBLY WITH ABS. LOCATED BETWEEN…

WHEEL HUB ASSEMBLY WITH ABS. LOCATED BETWEEN THE BRAKE DRUM AND DRIVE AXLE. ON THE AXLE SIDE THE WHEEL HUB ASSEMBLY IS MOUNTED TO THE HOLDING BRACKET FROM THE CHASSIS AND ON THE DRUM SIDE. THE WHEEL IS MOUNTED TO THE BOLTS OF THE WHEEL HUB ASSEMBLY.

Start date of validity:
.

WHEEL HUB ASSEMBLY. LOCATED BETWEEN THE BRAKE…

WHEEL HUB ASSEMBLY. LOCATED BETWEEN THE BRAKE DRUM AND DRIVE AXLE. ON THE AXLE SIDE THE WHEEL HUB ASSEMBLY IS MOUNTED TO THE HOLDING BRACKET FROM THE CHASSIS AND ON THE DRUM SIDE. THE WHEEL IS MOUNTED TO THE BOLTS OF THE WHEEL HUB ASSEMBLY.

Start date of validity:
.