OF STEEL.

ОТ СТОМАНА 165 Z OCELI 1059 AF STÅL 48 AUS STAHL 15563 ΑΠΟ ΧΑΛΥΒΑ 34 DE ACERO 1035 TERASEST 3 TERÄKSESTÄ 170 D'ACIER 1385 OD ČELIKA 12 ACÉLBÓL 184 DI ACCIAIO 425 IŠ PLIENO 19 NO TĒRAUDA 27 VAN STAAL 634 ZE STALI 1658 DE ACO 9 DIN OŢEL 96 Z OCELE 289 IZ JEKLA 41 AV STÅL 989

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED…

THE PRODUCT IS A SET OF THREE WHEELS DESIGNED TO BE FITTED TO A TELEVISION CAMERA PEDESTAL. THE WHEELS ENABLE THE PEDESTAL TO BE MOVED QUICKLY WHEN REQUIRED IN OUTSIDE BROADCAST SETTINGS.

THE TYRES ARE MADE OF RUBBER AND THE WHEELS AND AXLES ARE MADE OF STEEL. THE PIVOT BLOCK/AXLE HOLDER IS MADE OF ALUMINIUM.

THE WHEELS ARE 6" IN DIAMETER AND APPROXIMATELY 6" WIDE WITHOUT THE CABLE GUARD.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL FOR PROFESSIONAL USE TELEVISION CAMERAS CAMERAS WHEELS

A WTG (WIND TURBINE GENERATOR) STRUCTURE,…

jackets; of steel; structures; towers

A WTG (WIND TURBINE GENERATOR) STRUCTURE, A SO CALLED JACKET WHICH IS A THREE LEGGED STRUCTURE AND IS MADE OF STEEL AND WILL BE INSTALLED OFF-SHORE. ITS PURPOSE IS TO SUPPORT A WIND TURBINE WHICH WILL CREATE RENEWABLE ENERGY. HEIGHT 77.5 - 93M WEIGHT 2000 - 2250MT

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: JACKETS OF STEEL STRUCTURES TOWERS

Rupture disk (made of stainless steel) This…

Rupture disk (made of stainless steel) This bursting disk is a thin disk of steel used as a safety device.

There are mounted by means of a special carrier on pipe systems or pressure vessels and burst at a specific pressure.

They are available in a range of diameters from 25 - 200mm and burst pressures from 2 -34 bar.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL OF STAINLESS STEEL STAINLESS STEELS SAFETY EQUIPMENT

A 4-BOLT FLAT BASE SCAFFOLD CLAMP DESIGNED…

of steel; of base metals; aluminium

A 4-BOLT FLAT BASE SCAFFOLD CLAMP DESIGNED FOR USE WITH TELEVISION CAMERAS FOR OUTSIDE BROADCASTING.

A PAN AND TILT HEAD UNIT CAN BE AFFIXED TO THE CLAMP WITH A CAMERA IN TURN MOUNTED ON THE HEAD UNIT.

IT HAS A LOAD CAPACITY OF 182KG. THE BODY OF THE CLAMP IS ALUMINIUM WITH STEEL HANDLES AND SCREWS.

DIMENSIONS ARE APPROXIMATELY 14" LENGTH BY 6" BREADTH BY 4" HIGH.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL OF BASE METALS ALUMINIUM

A CLAMP WITH A TELESCOPIC PAN BAR. IT CAN…

of steel; of base metals; aluminium

A CLAMP WITH A TELESCOPIC PAN BAR. IT CAN BE FIXED TO THE HEAD UNIT OF A CAMERA ALLOWING THE OPERATOR TO SMOOTHLY PAN IN DIFFERENT DIRECTIONS WHEN FILMING MOVING OBJECTS.

THE MAIN BODY OF THIS IS ALUMINIUM WITH SMALL STEEL SHAFTS AND SOME PLASTIC AND TPE COVERED KNOBS.

DIMENSIONS ARE APPROXIMATELY 16 INCHES IN LENGTH, TUBE DIMETER IS 1 INCH.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL OF BASE METALS ALUMINIUM

A MANUAL WHEEL LIFT ASSIST TOOL/HOIST. THE…

A MANUAL WHEEL LIFT ASSIST TOOL/HOIST. THE PRODUCT IS SPECIFICALLY DESIGNED TO LIFT A SPARE WHEEL FROM A VEHICLE'S BOOT SPACE, WHICH CAN WEIGH BETWEEN 40KG AND 60 KG, DEPENDING ON THE SIZE OF THE SPARE WHEEL.

THE LIFTING HOIST WHEN ATTACHED TO A WHEEL, REDUCES THE LIFTING FORCE REQUIRED AND ENABLES A SAFE REMOVAL OF THE SPARE WHEEL.

THE PRODUCT CONSISTS OF A LIFTING PLATE OF MILD STEEL, ALSO A BLACK LIFTING STRAP, WHICH IS 25MM IN LENGTH AND IS MADE OF POLYPROPYLENE (PP), A STEEL HOOK COVERED IN SPONGE RUBBER AND LIFTING RINGS (PULLEY TACKLE MECHANISM) WHICH IS MADE OF C20 STEEL AND ZINC PLATED FOR HOOKING SECURELY ONTO THE CENTRE OF THE SPARE WHEEL IN PREPARATION FOR LIFTING THE SPARE WHEEL FROM THE BOOT SPACE.

THE PRODUCT IS AN ACCESSORY WITHIN THE BOOT SPACE OF A VEHICLE.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF STEEL HAND OPERATED FOR VEHICLES MECHANICAL FOR LIFTING

Non Threaded express Nails Used in connecting…

of metal; of steel; nails

Non Threaded express Nails Used in connecting timber to brick - these products are also called spring nails. Made from Steel

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL NAILS

THE PRODUCT IS A DESK TOP SCREEN DIVIDER.…

THE PRODUCT IS A DESK TOP SCREEN DIVIDER. ITS PURPOSE IS TO PROVIDE PROTECTION FOR ANYONE SITTING AT THEIR DESK POSITION, FROM OTHERS, IN CLOSE PROXIMITY TO THEM.

IT IS MANUFACTURED FROM A PVC SHEET/FACE SUPPORTED AND ENCLOSED IN AN ANODISED STEEL FRAME. IT IS MODULAR AND CAN BE USED ON ITS OWN BY APPLYING FEET TO A SINGLE SCREEN, OR BY ATTACHING MULTIPLE SCREENS TOGETHER, BY ATTACHING THEM TO JOINING PIECES.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF METAL WITH METAL FRAMES OF STEEL SCREENS

A MONITOR SPIN STAND WITH BUILT IN COMPARTMENTS…

of plastic; of steel; base metals; for indoor use; stands; monitors;…

A MONITOR SPIN STAND WITH BUILT IN COMPARTMENTS FOR HOLDING SMALL ITEMS OF VALUE OR STATIONARY.

THE STAND ALLOWS YOU TO ADJUST YOUR MONITOR HEIGHT TO PERSONAL COMFORT, TO HELP REDUCE NECK AND EYE STRAIN.

THE PLATFORM FITS MOST WIDESCREEN MONITORS UP TO 18KG, WITH A 360 DEGREE SPINNING CAROUSEL. THE STAND IS MADE OF 83% STEEL AND 16% HIPS (HIGH IMPACT POLYSTYRENE).

DIMENSIONS 320 MM WIDE X 80 MM HIGH X 320 MM DEEP.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC OF STEEL BASE METALS FOR INDOOR USE STANDS MONITORS MONITOR SCREENS

ELECTRICAL CABLE CLEATS MADE FROM STAINLESS…

ELECTRICAL CABLE CLEATS MADE FROM STAINLESS STEEL OUTER AND SOFT POLYERIC LINER INNER WITH FIXINGS, USED TO SUPPORT CABLES - SIZE RANGE 19-24 TO 160-215MM. THE CLEATS CONSIST OF SINGLE SHAPED STEEL BAND IN FORM OF A CLAMP, FASTENED TOGETHER WITH HEXAGON NUT AND BOLT.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF METAL OF STEEL OF BASE METALS