TUBES.

ТРЪБИ 23 TRUBKY 268 RØR 41 ROHR 1310 TUBO 117 PUTKET 15 TUBE 492 TUBI 139 VAMZDELIAI 4 KAMERAS 9 BUIZEN 209 PRZEWODY 134 TUBO 2 TUB 12 RÚRKY 47 CEVI 53 RÖR 98

E-GUIDE TUBE IS AN ESSENTIAL PART OF A MEDICAL…

tubes; for surgical use; medical instruments; medical equipment…tubes; for surgical use; medical instruments; medical equipment…

E-GUIDE TUBE IS AN ESSENTIAL PART OF A MEDICAL DEVICE KNOWN AS A PROGLIDE VESSEL-CLOSURE DELIVERY SYSTEM.

THIS DEVICE IS USED TO CLOSE THE PUNCTURE SITE FOLLOWING A SURGICAL PROCEDURE. THE E-GUIDE PROVIDES INCREASED STIFFNESS TO THE PROXIMAL GUIDE AND ANCHORS THE GUIDE SECTION IN THE HANDLE OF THE MEDICAL DEVICE.

IT CREATES LUMENS FOR MARKING AND SUTURE DELIVERY AND ALSO PROVIDES PROTECTION FOR THE NEEDLE TIPS AND PRE-FORMED KNOT WITHIN THE PROGLIDE VESSEL-CLOSURE DELIVERY SYSTEM.

THE E-GUIDE IS A HOLLOW OVALISED STAINLESS STEEL TUBE WITH AN INNER DIAMETER OF .088 INCHES, A WALL THICKNESS OF .005 INCHES AND A LENGTH OF 3.2205 INCHES, WHICH IS OPEN AT BOTH ENDS.

IT FITS BETWEEN THE SHEATH AND HANDLE OF THE PROGLIDE VESSEL-CLOSURE DELIVERY SYSTEM. THE E-GUIDE IS MADE SPECIFICALLY TO FIT THE PROGLIDE VESSEL-CLOSURE DELIVERY SYSTEM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES FOR SURGICAL USE MEDICAL INSTRUMENTS MEDICAL EQUIPMENT PARTS

STRAIGHT PLASTIC HOSE CONNECTOR, WITH INTERNAL…

of plastic; tubesof plastic; tubes

STRAIGHT PLASTIC HOSE CONNECTOR, WITH INTERNAL O RING. THIS CONNECTS TO THE FUEL HOSE FOR USE IN CARS.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC TUBES

POLYMIDE TUBING THIS IS A RAW MATERIAL USED…

POLYMIDE TUBING THIS IS A RAW MATERIAL USED IN THE MANUFACTURING OF VESSELS CLOSURE MEDICAL DEVICES.

THE FUNCTION OF THE POLYMIDE TUBING IS TO PROVIDE MARK TO INDICATE THAT THE DEVICE IS IN THE CORRECT POSITION WITHIN THE ARTERY.

MATERIAL COMPOSITION IS POLYMIDE TUBING. THE TUBING IS OPENED, FLEXIBLE AND DOES NOT EXCEED BURST PRESSURE OF 27.6MPa

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF PLASTIC TUBES POLYAMIDES FLEXIBLE MEDICAL TUBING

WIRE GUIDE TUBES. THE TUBES ARE MADE FROM…

WIRE GUIDE TUBES. THE TUBES ARE MADE FROM HIGH ALLOY CARBON STEEL . THE TUBES COME IN VARIOUS DESIGNS. THE TUBES ARE OF CIRCULAR CROSS-SECTION WHICH HAVE BEEN COLD-DRAWN. THE GUIDE TUBES ASSIST A MACHINE IN WINDING WIRE AROUND COILS. THE CARBON VALUE IS 0.90 TO 1.20%. THE LENGTH IS APPROX 45MM.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES SEAMLESS NON-ALLOY STEEL