WITH CIRCULAR CROSS-SECTION.

С КРЪГЛО НАПРЕЧНО СЕЧЕНИЕ 1 S KRUHOVÝM PRŮŘEZEM 30 MED RUNDT TVÆRSNIT 2 MIT KREISFÖRMIGEM QUERSCHNITT 2 ΜΕ ΚΥΚΛΙΚΗ ΔΙΑΤΟΜΗ 6 CON SECCION TRANSVERSAL CIRCULAR 28 ÜMMARGUSE LÄBILÕIKEGA 1 PYÖREÄ LÄPILEIKKAUS 1 À SECTION TRANSVERSALE CIRCULAIRE 20 CON SEZIONE TRASVERSALE CIRCOLARE 11 APVALAUS SKERSPJŪVIO 2 AR APAĻU ŠĶĒRSGRIEZUMU 11 MET RONDE DWARSDOORSNEDE 20 O PRZEKROJU OKRĄGŁYM 88 CU SECŢIUNE TRANSVERSALĂ CIRCULARĂ 7 S KRUHOVÝM PRIEREZOM 4 S KROŽNIM PRESEKOM 2 MED RUNT TVÄRSNITT 12

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

tubes; welded; non-alloy steel; with circular cross-section;…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH OUTER DIAMETER OF NOT MORE THAN 168,3 MM, MAXIMUM LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES WELDED NON-ALLOY STEEL WITH CIRCULAR CROSS-SECTION MISCELLANEOUS ITEMS

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR…

THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH.

WITH OUTER DIAMETER OF EXCEEDING 168,3 MM BUT NOT EXCEEDING 406.4MM, MAXIMUM LENGTH 20M.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: TUBES WELDED NON-ALLOY STEEL WITH CIRCULAR CROSS-SECTION MISCELLANEOUS ITEMS

A TYPE OF COILED STEEL TUBING. MANUFACTURED…

A TYPE OF COILED STEEL TUBING. MANUFACTURED OUT OF ALLOY STEEL BY WELDING STEEL STRIPS TOGETHER USING A HIGH FREQUENCY INDUCTION WELDING PROCESS.

HAS A CIRCULAR CROSS SECTION. PRINCIPALLY USED IN OIL WELL INTERVENTION. USED WITH A COILED TUBING UNIT, WHICH RAISES AND LOWERS THE COILS IN AND OUT OF THE WELL.

NOT ORDINARILY CAPABLE OF BEING USED, OR PHYSICALLY SUITABLE, FOR DRILLING.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL TUBES WELDED WITH CIRCULAR CROSS-SECTION

DIP PIPE OF CIRCULAR CROSS-SECTION. MADE…

DIP PIPE OF CIRCULAR CROSS-SECTION. MADE OF CARBON STEEL. SEAMLESS. OTHER THAN COLD ROLLED. WITH A CEV NOT EXCEEDING 0.86 ACCORDING TO THE INTERNATIONAL INSTITUTE OF WELDING FORMULA AND CHEMICAL ANALYSIS DESIGNED AS PART OF A PIPING SYTEM (SAMPLING SYSTEM).

TO BE SUSPENDED INTO LARGE VESSELS EITHER FOR PUTTING LIQUIDS IN OR SUCKING THEM OUT. THE PIPE IS CARBON STEEL, WITH A LINING ON THE INSIDE AND OUTSIDE OF PTFE (PLASTIC).

THEY ARE FLANGED (STEEL) AT ONE END FOR FIXING TO THE VESSEL.

Nomenclature code:
Nomenclature code.
Start date of validity:
.

National keywords: OF STEEL PIPES AND TUBES FOR LIQUIDS SEAMLESS WITH CIRCULAR CROSS-SECTION